Commit Graph

212 Commits

Author SHA1 Message Date
Gregory Nutt
e61d51dab3 If multiple AT24xx devices are supported and resources are allocated, then it may also be necessary to free those resource 2015-11-17 08:39:06 -06:00
Gregory Nutt
724901ceb9 Add support for multiple AT24xx EEPROM devices 2015-11-17 07:40:17 -06:00
Gregory Nutt
015429684f MTD progmem: Fix an address calculation 2015-11-13 11:32:34 -06:00
Gregory Nutt
2706b4f8aa mtd_progmem.c: Fix calculation of block size 2015-11-13 09:19:25 -06:00
Gregory Nutt
fdb17620a0 Need a prototype for progmem_initialize in include/nuttx/mtd/mtd.h 2015-11-12 16:03:24 -06:00
Gregory Nutt
ef59f83a38 drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h 2015-11-12 13:40:18 -06:00
Gregory Nutt
9f3edd6373 MTD Smart: Remove checks for 64KB erase block size. erasesize was changed to 32-bits in struct mtd_geometry_s 2015-11-11 08:25:03 -06:00
Gregory Nutt
2ff1b173f2 SmartFS: Backout last change. It alters the behavior when it should not. Obviously there is something that I do not understand 2015-11-11 08:15:08 -06:00
Gregory Nutt
08200d8f86 S24FL1: Fix so that the driver compiles with 512 byte block support 2015-11-10 13:34:33 -06:00
Gregory Nutt
eb1191df63 S24FL1: Fix an error in the page write logic 2015-11-10 12:48:29 -06:00
Gregory Nutt
965addb397 s25fl1: When unprotecting, handle case where protection bits are inverted. Add option to s25flinitilize() to unprotected on power up 2015-11-10 11:33:35 -06:00
Gregory Nutt
2ab0832c26 Smart MTD: fix some outdated logic: geometray erase size is now 32-bits 2015-11-09 09:35:14 -06:00
Gregory Nutt
91429433f6 Correct naming of Spansion part. S25FL1, not ST25FL1 2015-11-07 11:51:09 -06:00
Gregory Nutt
b2bdba0824 S25FL1 FLASH driver: Fix return value from the bwrite() method 2015-11-07 11:26:53 -06:00
Gregory Nutt
bfeef77f1f SmartFS: Fix a compile error when FS debug enabled. Plus some changes needed by NuttX coding standard 2015-11-05 11:25:39 -06:00
Gregory Nutt
a314b2ac11 ST25FL1: Fix error that was overwriting status 2015-11-05 10:38:47 -06:00
Frank Benkert
e772c56ef6 AT24xx EEPROM Driver: Correct typo from last changeset 2015-10-31 09:04:53 -06:00
Gregory Nutt
46b688e701 Merged in marten_svanfeldt/nuttx-public/for_upstream/at24cxx (pull request #28)
Improvements of AT24xx MTD driver
2015-10-22 18:15:39 +08:00
Marten Svanfeldt
a31d1fd378 Make I2C frequency configurable for the AT24Cxx EEPROM driver
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 12:01:36 +08:00
Marten Svanfeldt
af9590eef7 Extend the AT24Cxx MTD driver with support for -04,-08 and -16 parts.
These parts utilize the same one-byte-address in the I2C protocol as the -02,
but requires different I2C addresses for different banks of the EEPROM.

Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 12:01:36 +08:00
Gregory Nutt
cf14f8d1b5 drivers/: Fixes to spacing and alignement 2015-10-10 10:41:00 -06:00
Gregory Nutt
0b12dbf95d Fix some spacing problems 2015-10-04 15:04:00 -06:00
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Gregory Nutt
7d33e858dd QSPI interface + ST25FL1 driver: Add methods to allocate properly aligned memory 2015-09-06 09:37:34 -06:00
Gregory Nutt
f44320d2a6 ST25FL1: SAMV71 QSPI always does transfers in multiples of 4 bytes 2015-09-02 10:19:47 -06:00
Paul A. Patience
3b89eabd50 Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2. 2015-09-01 13:52:29 -04:00
Gregory Nutt
ebd97dcf89 ST25FL1: Make buffers all even multiple of 32-bit values 2015-08-31 10:18:50 -06:00
Gregory Nutt
2d84270552 ST25FL1: Correct some compile problems when file system debug is enabled 2015-08-31 09:25:14 -06:00
Gregory Nutt
ed750f3600 ST25FL1: Changes after review of ST24FL1 clocking 2015-08-29 18:54:20 -06:00
Gregory Nutt
d6b0a8fe72 ST25FL1 driver is code complete 2015-08-29 15:58:54 -06:00
Gregory Nutt
4a1951b192 ST25FL1: Flesh out FLASH write logic 2015-08-28 12:01:08 -06:00
Gregory Nutt
d2653ef7a8 ST25FL1: Update for changes to QSPI interface definitions 2015-08-28 10:15:39 -06:00
Gregory Nutt
361e35a7be QSPI: Make changes to interface to better work with the SAMV71 2015-08-27 14:16:51 -06:00
Gregory Nutt
7936819fcc ST25FL1: Flesh out more initialization logic 2015-08-26 14:16:45 -06:00
Gregory Nutt
1cf57ae2bd Cosmetic 2015-08-26 07:16:07 -06:00
Gregory Nutt
8fe0121e1a Convert fragmentation ST24FL1 driver to use QSPI interface 2015-08-25 17:20:54 -06:00
Gregory Nutt
94ecf7ebad drivers/mtd/st25fl1.c: Add a driver for ST25FL1*K QuadSPI FLASH parts 2015-08-25 09:10:12 -06:00
Gregory Nutt
3743d3d84a Add configuration options for forthcoming st25fl1 devices 2015-08-24 08:00:39 -06:00
David Sidrane
c83d92e846 RAMTRON: Update driver to include support for newer RAMTRON parts. 2015-08-10 11:30:37 -06:00
Gregory Nutt
be09a87c0e SST25: Eliminate some warnings 2015-07-03 14:38:33 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
d43a09275a AT24 EEPROM driver. Fix some an incorrect variable name used in conditional compilation. SourceForge patch #55 2015-05-15 06:15:58 -06:00
Gregory Nutt
e4d2822af8 Make some file section headers more consistent with standard 2015-04-08 07:15:32 -06:00
Gregory Nutt
495f420978 Extend the AT24 EEPROM driver so that it supports: (1) the byte-oriented read() method, (2) parts with extended memory regions, and (3) parts with 8-bit addressing. 2015-03-17 14:27:27 -06:00
Gregory Nutt
b5bfb6762d Fix some BBRAM return values (from David Sidrane). Also some MTD-related cosmetic changes 2015-03-05 08:08:11 -06:00
Gregory Nutt
e7470e0834 Update dates in all skeleton files 2015-02-13 06:13:34 -06:00
Gregory Nutt
f3427cb32a mtd/ramtron.c: Table of parts is not terminated properly if CONFIG_RAMTRON_FRAM_NON_JEDEC is not defined 2015-02-09 16:35:58 -06:00
Gregory Nutt
1c39b67e32 STM32: Fix some incorrectly placed conditional logic 2014-12-26 12:41:35 -06:00
Gregory Nutt
33bcb5dbca Back out some incorrect conditional compilation 2014-12-26 10:26:52 -06:00
Gregory Nutt
6daa9468f6 More RAMTRON related fixes from David Sidrane 2014-12-26 08:15:59 -06:00