When using IOB queue to store readahead data, we use one IOB for each
UDP packet. Then if the packets are very small, like 10Bytes per packet,
we'll use ~1600 IOBs just for 16KB recv buffer size, which is wasteful
and dangerous. So change conn->readahead to a single IOB chain like TCP.
Benefits:
- Using memory and IOBs more efficiently (small packets are common in
UDP)
Side effects:
- UDP recv buffer size may count the overhead
- A little bit drop in performance (<1%, more seek & copy)
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Problem:
When tcp_close_work starts to run in LPWORK, if another event comes and
calls tcp_free before tcp_close_work takes net_lock, the tcp_free will
be called twice and cause double free.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
- NewReno congestion control algorithm is used to solve the problem
of network congestion breakdown. NewReno congestion control includes
slow start, collision avoidance, fast retransmission, and fast
recovery. The implementation refers to RFC6582 and RFC5681.
- In addition, we optimize the congestion algorithm. In the conflict
avoidance stage, the maximum congestion window max_cwnd is used to
limit the excessive growth of cwnd and prevent network jitter
caused by congestion. Maximum congestion window max_cwnd is updated
with the current congestion window cwnd and the update weight is
0.875 when an RTO timeout occurs.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
Issue:
TCP rx buffer is freed after 4-way handshake with current design.
3 socket's rx buffer might be consumed during ffmpeg switch music procedure,
and this might cause IOB exhausted.
Solution:
free TCP rx buffer immediately in tcp_close to make sure IOB won't be
exhausted.
Signed-off-by: 梁超众 <liangchaozhong@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
1. Remove tcp_txdrain() from close() to avoid indefinitely block
2. Send TCP_RST immediately if linger timeout
Signed-off-by: chao an <anchao@xiaomi.com>
devif/ipv6_input.c: In function 'ipv6_input':
devif/ipv6_input.c:59:33: error: 'TCPIPv6BUF' undeclared (first use in this function); did you mean 'IPv6BUF'?
59 | #define PAYLOAD ((FAR uint8_t *)TCPIPv6BUF)
| ^~~~~~~~~~
devif/ipv6_input.c:302:14: note: in expansion of macro 'PAYLOAD'
302 | payload = PAYLOAD; /* Assume payload starts right after IPv6 header */
|
Signed-off-by: chao an <anchao@xiaomi.com>
Fixed by commit:
| net: remove pvconn reference from all devif callback
|
| Do not use 'pvconn' argument to get the connection pointer since
| pvconn is normally NULL for some events like NETDEV_DOWN.
| Instead, the connection pointer can be reliably obtained from the
| corresponding private pointer.
Signed-off-by: chao an <anchao@xiaomi.com>
I noticed that the conn instance will leak during stress test,
The close work queued from tcp_close_eventhandler() will be canceled
by tcp_timer() immediately:
Breakpoint 1, tcp_close_eventhandler (dev=0x565cd338 <up_irq_restore+108>, pvpriv=0x5655e6ff <getpid+12>, flags=0) at tcp/tcp_close.c:71
(gdb) bt
| #0 tcp_close_eventhandler (dev=0x565cd338 <up_irq_restore+108>, pvpriv=0x5655e6ff <getpid+12>, flags=0) at tcp/tcp_close.c:71
| #1 0x5658bf1e in devif_conn_event (dev=0x5660bd80 <g_sim_dev>, flags=512, list=0x5660d558 <g_cbprealloc+312>) at devif/devif_callback.c:508
| #2 0x5658a219 in tcp_callback (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>, flags=512) at tcp/tcp_callback.c:167
| #3 0x56589253 in tcp_timer (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:378
| #4 0x5658dd47 in tcp_poll (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_devpoll.c:95
| #5 0x5658b95f in devif_poll_tcp_connections (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:601
| #6 0x5658b9ea in devif_poll (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:722
| #7 0x56577230 in netdriver_txavail_work (arg=0x5660bd80 <g_sim_dev>) at sim/up_netdriver.c:308
| #8 0x5655999e in work_thread (argc=2, argv=0xf3db5dd0) at wqueue/kwork_thread.c:178
| #9 0x5655983f in nxtask_start () at task/task_start.c:129
(gdb) c
Continuing.
Breakpoint 2, tcp_update_timer (conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:178
(gdb) bt
| #0 tcp_update_timer (conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:178
| #1 0x5658952a in tcp_timer (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:708
| #2 0x5658dd47 in tcp_poll (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_devpoll.c:95
| #3 0x5658b95f in devif_poll_tcp_connections (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:601
| #4 0x5658b9ea in devif_poll (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:722
| #5 0x56577230 in netdriver_txavail_work (arg=0x5660bd80 <g_sim_dev>) at sim/up_netdriver.c:308
| #6 0x5655999e in work_thread (argc=2, argv=0xf3db5dd0) at wqueue/kwork_thread.c:178
| #7 0x5655983f in nxtask_start () at task/task_start.c:129
Since a separate work will add 24 bytes to each conn instance,
but in order to support the feature of asynchronous close(),
I can not find a better way than adding a separate work,
for resource constraints, I recommend the developers to enable
CONFIG_NET_ALLOC_CONNS, which will reduce the ram usage.
Signed-off-by: chao an <anchao@xiaomi.com>
Do not use 'pvconn' argument to get the connection pointer since
pvconn is normally NULL for some events like NETDEV_DOWN.
Instead, the connection pointer can be reliably obtained from the
corresponding private pointer.
Signed-off-by: chao.an <anchao@xiaomi.com>
since it is impossible to track producer and consumer
correctly if TCP/IP stack pass IOB directly to netdev
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
fix regression of invalid update the rexmit_seq in buffer mode
rexmit_seq should not be used instead of sndseq in fast retransmission,
sndseq of retransmission in the packet does not need to be re-updated
Signed-off-by: chao.an <anchao@xiaomi.com>
Retransmit only one the earliest not acknowledged segment
(according to RFC 6298 (5.4)). The issue is the same as it was
in tcp_send_unbuffered.c and tcp_sendfile.c.
Signed-off-by: chao.an <anchao@xiaomi.com>
The time consuming of tcp waving hands(close(2)) will be affected
by network jitter, especially the wireless device cannot receive
the last-ack under worst environment, in this change we move the
tcp close callback into background and invoke the resource free
from workqueue, which will avoid the user application from being
blocked for a long time and unable to return in the call of close
Signed-off-by: chao.an <anchao@xiaomi.com>
1. remove the unnecessary interfaces tcp_close_monitor()
socket flags(s_flags) is a global state for net connection
remove the incorrect update for stop monitor
2. do not start the tcp monitor from duplicated psock
the tcp monitor has already registered in connect callback
------------------------------------------------------------
This patch also fix the telnet issue reported by:
https://github.com/apache/incubator-nuttx/pull/5434#issuecomment-1035600651
the orignal session fd is closed after dup, the connect state
has incorrectly migrated to close:
drivers/net/telnet.c:
977 static int telnet_session(FAR struct telnet_session_s *session)
...
1031 ret = psock_dup2(psock, &priv->td_psock);
...
1082 nx_close(session->ts_sd);
Signed-off-by: chao.an <anchao@xiaomi.com>
According to RFC 5681 (3.2) the TCP Fast Retransmit algorithm should start
if the threshold of 3 duplicate ACKs is reached.
Thus the threshold should be a constant, not an integer option.
tcp_sendfile() reads data directly from a file and does not use NET_TCP_WRITE_BUFFERS data flow
even if CONFIG_NET_TCP_WRITE_BUFFERS option is enabled.
Despite this, tcp_sendfile relied on NET_TCP_WRITE_BUFFERS specific flow control variables that
were idle during sendfile operation. Thus it was a total inconsistency.
E.g. because of the issue, TCP socket used by sendfile() operation never issued
FIN packet on close() command, and the TCP connection hung up.
As a result of the fix, simultaneously enabled CONFIG_NET_TCP_WRITE_BUFFERS and
CONFIG_NET_SENDFILE options can coexist.
If the remote TCP receiver advertised TCP window size greater than 64 KB
and TCP ACK packets returned to the NuttX TCP sender with a significant delay,
tx_unacked variable overflowed and further TCP send stalled forever
(until TCP re-connection).
