Update all files possible under sched/timer to Apache 2.0. These excludes two files that have a Xiaomi copyright. Also, run all modified files through nxstyle to assure that the conform to the coding standard.
arch/z80/src/ez80/ez80_timerisr.c: Correct a mismatch between the programmed reload value and the timer input clock frequency.
arch/z80/src/ez80/ez80f92.h: Correct error in timer input clock divider: Bits 2-3, not bits 3-4.
boards/z80/ez80/z20x/src/w25_main.c: Correct an uninitialized return value; private function was not declard static.
* stm32h7: New timer output mode STM32_TIM_CH_OUTTOGGLE.
In this mode timer generates a square waveform on given timer channel.
The maximal waveform freq is timer clock divided by 4 (prescaler 1, period 1 results in 2 clocks '0' and 2 clocks '1').
* stm32_tim.h styling fixes.
arch/z80/src/ez80/ez80f92_init.asm: Timer control register was not being cleared and, as a result, timer interrupts may have been already enabled when the CPU was started by the debugger. This would result in spurious interrupts and Unexpected Interrupt crashes.
arch/z80/src/comming/up_initialize.c: Fix a trivial typo.
While we are at it, change the license headers in all relevant files in the affected directories to the Apache 2.0 license. Run all affected files through nxstyle.
PR #488 introduced an error in a file license header in file sched/mqueue/mqueue.h. This commit fixe that error and in the course of doing that, changing the license header to the standard Apache 2.0 header. I am the author and copyright hold of all modified files.
Clean up the no and unknown file extension info since only .h and .c
files supported. Just ignore them quietly.
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
boards/z80/ez80/z20x/src/w25_main.c: (1) Correct size comparison typo: Should have been >= not != (2) Fix sizeof(): Was ugetting the sizeof the pointer instead of the sizeof the pointed at structure. (3) Improve some comments.
boards/z80/ez80/z20x: Increase RX buffer size to 4Kb, reduce BAUD to 2400 in w25boot configuration
arch/z80/src/ez80/ez80_serial.c: Reduce Rx FIFO trigger level for eZ80F92 to 1 so that will respond more quickly to incoming data.
Also fix the following build warning:
chip/sam_serialinit.c: In function 'sam_earlyserialinit':
chip/sam_serialinit.c:71:4: warning: implicit declaration of function 'uart_earlyserialinit'; did you mean 'sam_earlyserialinit'? [-Wimplicit-function-declaration]
71 | uart_earlyserialinit();
| ^~~~~~~~~~~~~~~~~~~~
| sam_earlyserialinit
Change-Id: I93adc5be739c222482b552b6e143e44c8c047794
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
