According to the current design on the armv7-a platform,
only fiq is processed in TEE, while irq and fiq are processed
in REE.
If we enable the irq function in TEE, when we process
some signal-related scenarios in TEE,
such as the ostest sighand testcase, this testcase will
call up_irq_enable() to enable irq interrupt in the
arm_sigdeliver() function. After the signal processing
logic is executed, irq will be disabled again.
During the interval of enabling irq, some external device
irq interrupts will be enabled, but these external device
irqs do not have corresponding handlers registered in TEE,
so an "unexpected irq isr exception" will be triggered.
Therefore, a better implementation is to keep the original
implementation of the up_irq_enable() function, that is,
to enable only fiq in TEE and to enable irq and fiq in REE.
Then for vendor-specific requirements, such as the need to
briefly enable irq during the TEE initialization process
and then disable irq before starting APz in TEE, we directly
provide a separate implementation of enabling irq in the
vendor, without modifying the implementation of the public
up_enable_irq() function.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
CC: unistd/lib_setregid.c "/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/nuttx/irq.h", line 53: warning #193-D:
zero used for undefined preprocessing identifier "NR_IRQS"
# if NR_IRQS <= 256
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/nuttx/irq.h", line 82: warning #193-D:
zero used for undefined preprocessing identifier "NR_IRQS"
#if NR_IRQS <= 256
CC: mount/fs_umount2.c "/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/nuttx/irq.h", line 72: warning #193-D:
zero used for undefined preprocessing identifier "NR_IRQS"
#if NR_IRQS <= 256
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
the greenhills compiler provide its own implementation of va_start,
va_end, va_arg, va_copy. so if we are build vela with greenhills
compiler, we should using the stdarg implementation provided by
greenhills, not our own
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 252: warning #76-D:
argument to macro is empty
SP_DSB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 261: warning #76-D:
argument to macro is empty
SP_DMB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 252: warning #76-D:
argument to macro is empty
SP_DSB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 261: warning #76-D:
argument to macro is empty
SP_DMB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 296: warning #76-D:
argument to macro is empty
SP_DSB();
^
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
The following are the compile error that reported
by GreenHills compiler:
"/mnt/yang/qixinwei_commit/nuttx/include/arch/syscall.h", line 156 (col. 17): error #2036-D:
cannot allocate "reg0" to specified caller-saved register
"/mnt/yang/qixinwei_commit/nuttx/include/arch/syscall.h", line 157 (col. 17): error #2036-D:
cannot allocate "reg1" to specified caller-saved register
Then we fix this greenhills compilation error by explicitly specifying
the registers in the clobber list in the inline assembly code.
This fix is successful in compiling on the
nuttx/boards/arm/mps/mps2-an500/configs/nsh platform and passes
the ostest test.
However, if we keep the implementation the same for both the default
and Greenhills compilers, the default compiler will report the
following two issues:
1. the "sys_call6" function will report compile error when
compiling on "./vendor/qemu/boards/smartspeaker/configs/smartspeaker-knsh"
platform, the detailed error info:
CC: proxies/PROXY_mq_getattr.c In file included from /home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/sys/syscall.h:35,
from /home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/syscall.h:30,
from proxies/PROXY_mmap.c:5:
In function 'sys_call6',
inlined from 'mmap' at proxies/PROXY_mmap.c:9:22:
/home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/arch/syscall.h:297:3: error: 'asm' operand has impossible constraints
297 | __asm__ __volatile__
| ^~~~~~~
2. when running on qemu-armv7-a platform, the modification to
"smh_call()" function will make the system fail to boot up, so
we need to keep the default compiler implementation and greenhills
compiler implementation separate
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
(cherry picked from commit cb48b749b1c9cad8cfb96bff7c5e9b6ebf20fc8a)
Purpose: make the the os crash when busyloop with interrupt disable
Follow the arm gicv2 spec, if we want to use the IRQ and FIQ
simultaneously when not using the processor Security Externsions.
We should:
1. IRQ to Group 1 and FIQ to Group 0;
2. Set CICC_CTLR.FIQEn to 1;
Then in NuttX:
1. implement the arm_decodefiq and directly crash in it;
2. provide interface to change the IRQ to FIQ, e.g. change the
watchdog IRQ to FIQ, so the watchdog can trigger even with the
interrupt disabled (up_irq_save() called);
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
Current `CONFIG_PAGING` refers to an experimental implementation
to enable embedded MCUs with some limited RAM space to execute
large programs from some non-random access media.
On-demand paging should be implemented for the kernel mode with
address environment implementation enabled.
As long as the GNSS feature is not used, GNSS RAM can be used as general memory.
This memory is 640KByte total, which is lower performance than the application RAM.
It is possible to locate text, data and bss into GNSS RAM and to use as heap area.
Co-authored-by: Jari van Ewijk <jari.vanewijk@nxp.com>
Co-authored-by: David Sidrane <david.sidrane@nscdg.com>
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
imxrt:Kconfig fix formatting
imxrt:usbphy move IMXRT_USBPHY{1|[2]}_BASE to memory map
imxrt:lpspi Fix build breakage from adding 1170
imxrt:Finish 1170 iomux and clockconfig versioning
imxrt:Remove duplicate imxrt_clock{off|all}_lpi2c4
imxrt:pmu remove duplicate dcd non 117x header
imxrt:lpspi Fix unused var warnings
imxrt:lpi2c Fix unused var warnings
imxrt:lowputs Fix unused var warnings
imxrt:imxrt117x_dmamux fix duplicate entries
imxtr:serial Use IOMUX_PULL_{UP|DOWN} and map IOMUX V1 to them
imxrt:MPU Support the 1170
imxrt:dmamux Alias IMXRT_DMAMUX0_BASE as IMXRT_DMAMUX_BASE
imx1170:ccm Alias CCM_CCGR_DMA & CCM_CCGR_SNVS_LP for compatiblity
Author: Peter van der Perk <peter.vanderperk@nxp.com>
IMXRT7 Add LPUART 9/10/11/12 support
Author: David Sidrane <david.sidrane@nscdg.com>
imxrt:1170pinmux Add QTIMER pins
imxrt:1170pinmux Add GPT pins
imxrt:1170pinmux Add FLEXPWM pins
imxrt1170:pinmap Add GPIO_ENET_1G pinning
imxrt:enet Support ENET_1G
imxrt:periphclks rt1170 does not have canX_serial clock
imxrt:flexcan:Layer imxrt_ioctl
imxrt117x:memorymap added CAN3
imxrt:ADC support ver1 and ver2 for imxrt117x
imxrt:imxrt117x_ccm Align timer naming with other imxrt QTIMERn->TIMERn
imxrt:imxrt117x_ccm align CCM names with rt106x
imxrt:XBAR support larger number of selects needed on imxrt1170
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
FlexSPI AHB Region support, PIT rename for compatiblity
imxrt:USB Analog add VBUS_VALID_3V
FlexSPI expand prefetch registers for IMXRT117X
imxrt:Support Initialization of FlexRam without Running from OCRAM
imxrt: ocotp add UNIQUE_ID register definition
imxrt: enet use ocotp unique_id
imxrt: enet fixes for imxrt117x
imxrt: ethernet pinmux sion enable
imxrt:imxrt_periphclk_configure add memory sync
Flush the pipeline to prevent bus faults, by insuring a
peripheral is clocked before being accessed on return from
this function.
imxrt:Restructure gpioN to padmux mapping
imxrt:Add imxrt1170 daisy
imxrt: correct power modes for imxrt117x fixing hang on WFI
imxrt: imxrt117x TCM MPU config
imxrt: FlexRAM clocking DIV0 setup
imxrt: 117x periphclocks wait for status bit
imxrt: iomucx set pad settings correctly and allow reconfiguration
imxrt: enet align buffers 64-byte for optimal performance
Add DSC barriers for write-through cache support
imxrt: imxrt1170 use FlexCAN FD/ECC features
imxrt:iomuxc_ver2 (117x) SD_B1 and DISP_B1 use PULL feild not PUE/PUS
imxrt:Fix 1170 SNVS addressing
imxrt: enet set mii clock after ifdown so that phy keep working
nxstyle fixes
imxrt: preprocessor and include fixes
Fix configs
imxrt1170-evk clean defconfig
Summary
include/arch/syscall.h: Assembler messages:
include/arch/syscall.h:133: Error: bad instruction `struct arm_smccc_res'
include/arch/syscall.h:134: Error: junk at end of line, first unrecognized character is `{'
include/arch/syscall.h:135: Error: bad instruction `unsigned long a0'
include/arch/syscall.h:136: Error: bad instruction `unsigned long a1'
include/arch/syscall.h:137: Error: bad instruction `unsigned long a2'
include/arch/syscall.h:138: Error: bad instruction `unsigned long a3'
include/arch/syscall.h:139: Error: bad instruction `unsigned long a4'
include/arch/syscall.h:140: Error: bad instruction `unsigned long a5'
include/arch/syscall.h:141: Error: bad instruction `unsigned long a6'
include/arch/syscall.h:142: Error: bad instruction `unsigned long a7'
include/arch/syscall.h:143: Error: junk at end of line, first unrecognized character is `}'
include/arch/syscall.h:145: Error: bad instruction `typedef struct arm_smccc_res
Signed-off-by: wangming9 <wangming9@xiaomi.com>
Summary:
Adding virtual evaluate platform GoldFish. Which is based on
Android Goldfish Emulator, it's a ARM virt board but Android
enhance it with more featue.
The patch set goldfish as a arm chip.
Signed-off-by: wangming9 <wangming9@xiaomi.com>
Current implementation of QSPI in SPI mode was available only for MCUs
that do not have standard SPI at all. MCUs with both QSPI and SPI can
however also use QSPI in SPI mode and thus have one more SPI bus. This
commit adds required defines and config options to support QSPI in SPI
mode for all SAMv7 MCUs.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
stack_t used by sigaltstack, make it compile sucess in sim.
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
ltp: fix compile errors
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
Remove TABs
Fix indentation
Fix Multi-line comments
Fix Comments to the Right of Statements.
Fix nuttx coding style
Fix Comments to the Right of Statements.
