Commit Graph

362 Commits

Author SHA1 Message Date
Ken Pettit
c883c8a535 drivers/mtd/smart.c: Fix for the SmartFS MTD layer size mapping issue. With this patch, existing SmartFS drives should still mount and work properly, plus the larger sector sizes are now supported correctly. 2019-01-10 07:13:19 -06:00
Ken Pettit
47c8e537d1 drivers/mtd/s25fl1.c: Minor change for the s25fl1 QSPI FLASH driver which fixes additional sectorshift vs. pageshift confusion. 2019-01-09 07:24:58 -06:00
Jussi Kivilinna
0b41938bb6 drivers/mtd/mtd_config.c: Check return value mtdconfig_readbytes() 2019-01-02 09:52:55 -06:00
Daniel P. Carvalho
30ddb909c0 drivers/mtd/smart.c: Fix smart_write_alloc_sector sector size calculation. 2018-12-29 17:03:00 -06:00
Gregory Nutt
0cd5a232ea Fix a few typos. 2018-12-27 08:45:26 -06:00
Gregory Nutt
c137c6ef1f Clean up typos in some comments. 2018-12-22 08:12:34 -06:00
Ken Pettit
baab6dd1bd Extends the MTD configdata device with the following features / additions:
1.  Configurable option to use named config items instead of enumerated ID/Instance numbers.
2.  Ability to iterate through the existing configdata items in the /dev/config device.
3.  Ability to "unset" a configdata item.
4.  Ability to perform "flash_eraseall" on the /dev/config device.
2018-12-20 14:14:40 -06:00
Gregory Nutt
5c9e72f99d Squashed commit of the following:
arch/arm/src/tiva/hardware/cc13x0/cc13x0_fcfg1.h:  Adjust cloned CC13x9 FCFG1 header file so that it reflects reality.

    arch/arm/src/tiva/hardware/cc13x0/cc13x0_fcfg1.h:  Add CC13x0 FCFG1 header file.  Initial commit is the same as the CC13x2/CC26x2 FCFG1 header with a few name changes.

    arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_fcfg1.h:  Initial FCFG1 header file for the cc13xx/cc26xx family.
2018-12-13 12:35:39 -06:00
Marc Rosen
21328c528c drivers/mtd/at25.c: Fixed missing opening parenthesis. 2018-12-13 08:12:50 -06:00
Daniel P. Carvalho
e34e9fd782 drivers/mtd/at45db.c: Correct some typos. 2018-12-12 18:21:27 -06:00
Marc Rosen
16dff59cbd drivers/mtd/at25.c: Added support for AT25DF081A serial flash chip 2018-12-12 07:04:27 -06:00
Xiang Xiao
2e18b603ad drivers/mtd/mtd_partition.c: Remove the hard code partition name length 2018-11-09 08:24:17 -06:00
Xiang Xiao
78b725907d drivers/mtd/ftl.c: ADd support support unlink operation to avoid the memory leak 2018-11-09 08:22:51 -06:00
Xiang Xiao
47a2edc7a4 drivers/mtd/ftl.c: Allocate eblock only when it's really needed 2018-11-09 08:21:10 -06:00
zhuyanlin
e9000df50c drivers/mtd/ftl.c: Make READAHEAD and WRITEBUFFER work independently of each other. There have cases we use writebuffer but not readbuffer, so the write buffer must be flushed before read. Let rwb driver do it. 2018-11-09 08:18:46 -06:00
Xiang Xiao
65177b3344 drivers/mtd/ftl.c: Change ftl_initialize_by_name to ftl_initialize_by_path 2018-11-09 08:15:57 -06:00
Xiang Xiao
6ee09e8888 drivers/mtd/ftl.c: Support BIOC_FLUSH ioctl 2018-11-09 08:12:52 -06:00
Xiang Xiao
247414c6ad drivers/mtd and other MTD drivers: Remove mtd_procfsoperations since we can now get the same information from inode 2018-11-08 09:46:11 -06:00
Ken Pettit
aa9771751b drivers/mtd/s25fl1.c: During a MTDIOC_GEOMETRY ioctl call, the driver was incorrectly reporting the blocksize to be the same as the erasesize. The blocksize should be 256 (the page size). This patch fixes that, and now the SmartFS configration is working. 2018-10-18 07:02:02 -06:00
David Sidrane
9547b186df Merged in david_s5/nuttx/Lampoo-master-spi-flash (pull request #735)
drivers/mtd: add support to Macronix MX25LF25635F serial NOR flash

Approved-by: GregoryN <gnutt@nuttx.org>
2018-10-17 23:24:45 +00:00
Dave Marples
91eb792e56 Corrections for the i.MXRT Ethernet:
(1) Now the Ethernet is completely re-initialized when an error occurs by means of taking the interface down and back up but the PHY is _not_ renegotiated for that case because that is very time consuming and an error in the Ethernet is no reflection on the state of the PHY anyway.

(2) Explicitly sets the expected PHY address to zero (this could be moved into the config) rather than searching for it which takes ages, and it's zero anyway for this board (that's the broadcast address, and anything that cannot respond on that has multiple PHYs, so that would be a new board).

(3) Allows for the renegotiation of the PHY to be optional when a reset is needed. If a non-renegotiated reset doesn't result in good comms to the PHY then it'll automatically be escalated to a renegotiated one.

(4) Only performs a reset for errors that need it (the CRITICAL_ERROR define).  The list of errors that need reset are somewhat arbitrarily chosen based on my prejudices and might need to be revisited, but certainly the jabber errors don't need reset, the partial packet is thrown away by the layer above anyway.

(5) Re-loads the multicast table on reset.

(6) Adds a bit more logging into the imxrt Ethernet module.
2018-09-28 07:25:48 -06:00
Gregory Nutt
6d2cce99e1 fs/spiffs: Fix more problems found in testing. It is getting closer but examples/fstest is still showing problem. 2018-09-26 10:05:43 -06:00
Gregory Nutt
b823fd83bd arch/arm/src/armv7-a: Replicate the same fix was previously commited for the armv7-r. 2018-09-20 21:40:29 -06:00
EunBong Song
0f18e8cc32 Merged in ebsong/nuttx (pull request #722)
Pull request for mtd/progmem refactoring.

* mtd/progmem: change up_progmem_npages to up_progmem_neraseblocks

    page is a unit for read/write operation.
    eraseblock is a unit for erase operation.
    up_progmem_npages is a little bit confusing because it returns number of
    erase blocks in flash memory. This patch changes up_progmem_npages to
    up_progmem_neraseblocks. There is no logical change.

    Signed-off-by: EunBong Song <eunb.song@samsung.com>

* mtd/progmem: up_progmem_erasesize.

    Change argument name to be more readable.

    Signed-off-by: EunBong Song <eunb.song@samsung.com>

* mtd/progmem: up_progmem_eraseblock

    Change up_progmem_erasepage to up_progmem_eraseblock.
    eraseblock is more readable name than erasepage.

    Signed-off-by: EunBong Song <eunb.song@samsung.com>

* mtd/progmem: change up_progmem_eraseblock's return value.

    up_progmem_eraseblock erase a block. so it's better to return the erase block
    size than page size.

    Signed-off-by: EunBong Song <eunb.song@samsung.com>

* arm/cortex-r : fix wrong cp15_flash_dcache.

    change mcrne to mcr for unconditional dcache.

    Signed-off-by: sungduk.cho <sungduk.cho@samsung.com>

Approved-by: GregoryN <gnutt@nuttx.org>
2018-09-21 03:18:38 +00:00
Gregory Nutt
3a4984a40b Rename file_close_detached() to juse file_close() for better consistency in naming. 2018-09-15 13:04:56 -06:00
Gregory Nutt
a7fd58c4db Squashed commit of the following:
many locations:  Change occurences of open() followed by file_detach() to file_open().  Change most non-controversion calls to open() to nx_open().

    fs/inode/fs_fileopen.c:  Flesh out file_open() with some interim, placeholder logic.

    fs/inode/fs_fileopen.c:  Add a framework for a file_open() implementation (no real logic in place yet).

    fs/vfs/fs_open.c:  Add nx_open() which is the same as open() except that it does not create a cancellation point nor does it modify the errno variable.
2018-09-15 10:49:41 -06:00
Gregory Nutt
9546481054 Fix some typographical errors. 2018-09-14 06:55:45 -06:00
EunBong Song
d33b0640fe Merged in ebsong/nuttx (pull request #712)
Pull request for cortex-r4 codes

* arm/armv7-r: Add general interrupt controller.

    This is based on armv7-a gic controller code.

    Signed-off-by: EunBong Song <eunb.song@samsung.com>

* arm/armv7-r: add invalidate dcache in arm_head.S

    Adding invalidate dcache as a comment in arm_head.S.

    Signed-off-by: EunBong Song <eunb.song@samsung.com>

* arm/armv7-r: Fix some wrong configuration of program status register.

    PSR_E_BIT bit should be set for big endian system.
    PSR_A_BIT bis is set automatically as arm cortex-r4 reference manual 3.7.4.
    So we don't need to set this bit.

    Signed-off-by: EunBong Song <eunb.song@samsung.com>

* arm/armv7-r: Fix some wrong MPU register definition.

    Change MPU_RBAR_ADDR_MASK and MPU_RACR_TEX_SHIFT mask as
    arm cortex-r4 reference manual.

    Region Base Address Register 0-4 bits are reserved.
    MPU Region Access control register type 3-5 bits.

    Signed-off-by: EunBong Song <eunb.song@samsung.com>

* driver/mtd: fix compilation error.

    This commit fixes below compilation errors.

    CC:  mtd/smart.c
    mtd/smart.c:182:22: error: 'gWearBitToLevelMap4' defined but not used [-Werror=unused-const-variable=]
     static const uint8_t gWearBitToLevelMap4[] =
                          ^~~~~~~~~~~~~~~~~~~
    mtd/smart.c:170:22: error: 'gWearLevelToBitMap4' defined but not used [-Werror=unused-const-variable=]
     static const uint8_t gWearLevelToBitMap4[] =
                          ^~~~~~~~~~~~~~~~~~~
    cc1: all warnings being treated as errors
    make[1]: *** [smart.o] Error 1

    Signed-off-by: Junyeon LEE <junyeon2.lee@samsung.com>

Approved-by: GregoryN <gnutt@nuttx.org>
2018-08-29 01:50:41 +00:00
Gregory Nutt
15a1e44586 drivers/mtd/ftl.c: Reduce size of stack buffer from 64 to a maximum size as determined from NAME_MAX 2018-08-28 08:19:15 -06:00
Xiang Xiao
8b5ac497ad drivers/mtd/ftl.c: Support initialization of an FTL block device with a custom name 2018-08-28 07:15:57 -06:00
Xiang Xiao
41a1e76735 drivers/mtd/mtd_partition.c: Copy the partition name to internal buffer so that the caller can free the name argument 2018-08-28 07:09:59 -06:00
wangyanjiong
25f2bcea38 drivers/mtd: Add gd25 driver 2018-08-28 06:31:54 -06:00
Alan Carvalho de Assis
283b73edc5 Fix lots of typos in C comments and Kconfig help text 2018-07-08 18:24:45 -06:00
Gregory Nutt
a0e169ad7b net/: Fix a sixlowpan typo bug recently introduced; Rename g_ipv6_allzeroaddre with the more meaning g_ipv6_unspecaddr since the all-zero address is the IPv6 unspecified address (sometime IN6_ADDR_ANY). Remove more inline tests for IPv6 multicast with tcommint net_is_addr_mcast() macro. Update some comments. 2018-06-23 12:53:27 -06:00
Gregory Nutt
01b740c66b arch/arm/src/efm32: Support for common vector handling is forced for all EFM32 chips. Yes the architecture provides support for the old-style dedicated vector handling which can never be compiled. Furthermore, the old-style dedicated vector handling is deprecated in favor of common vector handling. The commit resolves this inconsistency be removing support for the dedicated vector handling from the EFM32 architecture support. 2018-06-19 13:37:00 -06:00
Gregory Nutt
8fdbb1e0a4 Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t
Squashed commit of the following:

    sched:  Rename all use of system_t to clock_t.
    syscall:  Rename all use of system_t to clock_t.
    net:  Rename all use of system_t to clock_t.
    libs:  Rename all use of system_t to clock_t.
    fs:  Rename all use of system_t to clock_t.
    drivers:  Rename all use of system_t to clock_t.
    arch:  Rename all use of system_t to clock_t.
    include:  Remove definition of systime_t; rename all use of system_t to clock_t.
2018-06-16 12:16:13 -06:00
Michał Łyszczek
249d7e0d84 drivers/mtd/mtd_config.c: mtdconfig_register() returned OK intead of -ENOMEM on failed malloc 2018-05-08 06:48:00 -06:00
Michael Jung
121211f096 progmem interface: Discern r/w and erase page sizes. Introduce new up_progmem_erasesize architecture API to be able to communicate the read/write page size independently from erase page size. Implement up_progmem_erasesize for all architectures that already support progmem, assuming that for those architectures the sizes of both read/write and erase pages are identical. 2018-05-01 06:23:52 -06:00
lihaichen
a71aa070e7 Merged in lihaichen/nuttx_fix_w25 (pull request #623)
fix w25_cacheflush sector bug.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-04-04 17:04:23 +00:00
Gregory Nutt
987a8298f2 Fix some errors found in build testing + clean-up some issues with last changes to remove use of printf() from within the OS. 2018-03-03 15:51:27 -06:00
Gregory Nutt
b4f2b0dfc6 Remove all usage of printf() from the OS. That is not an acceptable context for the use of an application-oriented interface that depends on a task-specific file descriptor and C buffered I/O. 2018-03-03 15:20:21 -06:00
Gregory Nutt
d1b31d536a Eliminate a couple more uses of printf() within the OS. There are several more. 2018-03-03 12:59:48 -06:00
Dmitriy Linikov
a8c58607e9 Merged in hardlulz/modem-3.0-nuttx/fix-sem-EINTR (pull request #603)
Added ECANCELED condition to DEBUGASSERT-s checking sem_wait result

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-02-20 18:24:53 +00:00
Gregory Nutt
8572837d9e Squashed commit of the following:
Author: Juha Niskanen <juha.niskanen@haltian.com>
Date:   Mon Feb 19 15:03:17 2018 -0600

    drivers/mtd:  mtd_config.c:  Add still more error handling (to detect bad underlying flash implementations)
    drivers/mtd:  mtd_config.c:  Remove MTD_ERASE that was erasing data block instead of erase block.  This is a partial revert of 4f18b4.  Reported-by: Pascal Speck <iktek01@yahoo.com>
    arch/arm/src/stm32l4:  stm32l4_flash: change flash programming to use page buffer for unaligned writes.
2018-02-19 15:03:47 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Alexander Oryshchenko
a7834bcb7b drivers/mtd/at24xx.c: Correct page size for AT24C02 part. 2018-01-24 06:51:34 -06:00
Ekaterina Kovylova
59a5c24739 drivers/mtd: Add a driver for Macronix MX35LFxGE4AB serial NAND flash. 2017-11-29 07:15:36 -06:00
Gregory Nutt
f3b37e5da3 fs/procfs/fs_procfsprogrem: Add /proc/progmem. This is an alternative way to get the information that was previoulsy available in apps/system/free. apps/system/free was removed beause it made illegal calls into the OS violating the portable interface. This new procfs entry provides the same information with no such violation. 2017-11-13 09:08:39 -06:00
Gregory Nutt
e52bc92238 drivers/mtd/filemtd.c: Don't use file descriptors... Use the internal file system interfaces so that the loop device can be shared across threads. 2017-11-02 17:07:08 -06:00
Gregory Nutt
bc40403516 There was a reference counting problem in the TPC logic of net_clone(). net_clone() which is the common logic underlying dup() and dup2() for sockets. When net_clone() calls net_start_monitor() and net_start_monitor() returns a failure (because the underlying TCP connection) then net_clone() must back out the reference count on the structure. Problem noted by Pascal Speck and this implementation of the solution is based on his suggestion. 2017-10-19 11:09:23 -06:00