Gregory Nutt
|
47be509d79
|
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
|
2017-07-06 10:20:14 -06:00 |
|
gwenhael.goavec
|
15b85738e7
|
In arch/arm/src/stm32/Kconfig when the CPU is a STM32F4, some STM32_HAVE_xx with xx = {OTGFS, TIM3, TIM4, SPI3, I2S3, I2C3} are selected by default. But for F410 these peripherals are absent. This change add tests to check if the target CPU is an F410 or not and selects according to the situation. This also adds a select for STM32_HAVE_DAC1 present on this STM32 flavor.
|
2017-07-06 09:52:21 -06:00 |
|
Gregory Nutt
|
94f26828e9
|
Fix a TTL-related issue introduced with last commit.
|
2017-07-06 09:45:52 -06:00 |
|
Julien Lecoeur
|
165ee0027a
|
Eliminate a warning with arm-none-eabi-gcc 7.1.0
|
2017-07-06 08:32:51 -06:00 |
|
Masayuki Ishikawa
|
57ed574f70
|
Merged in masayuki2009/nuttx.nuttx/network_test (pull request #427)
FS: Remove DEBUGASSERT() in block_proxy() because the flags are cleared later.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
|
2017-07-06 14:26:15 +00:00 |
|
Gregory Nutt
|
efdc5b0c29
|
IP forwarding: Add missing ICMP support.
|
2017-07-06 07:49:55 -06:00 |
|
Gregory Nutt
|
04716a65a5
|
IP forwading: Add optional support to forward broadcast and multicast packets.
|
2017-07-06 07:26:01 -06:00 |
|
Gregory Nutt
|
24e9647156
|
net/Kconfig: IP forwarding no long depends on only IPv6. Also update Kconfig comments.
|
2017-07-05 16:35:14 -06:00 |
|
Gregory Nutt
|
b297066eb9
|
IP Forwarding: Add IPv4 packet forwarding logic. Initial commit is an untested clone of the IPv6 forwarding logic with a few minor logic changes for IPv4.
|
2017-07-05 15:12:29 -06:00 |
|
Gregory Nutt
|
edf16c5805
|
IP forwarding: In check it the Ethernet MAC address is in the ARP/Neighbor table, add an additional check to skip in the case of CONFIG_NET_MULTILINK and the devices is not an Ethernet device.
|
2017-07-05 12:40:26 -06:00 |
|
Jeff
|
10f5f8f192
|
configs/Board.mk: Remove comment form end of line. In windows native build, it appears to be trying to make that an extra parameter to the AR command
|
2017-07-05 11:38:37 -06:00 |
|
Gregory Nutt
|
31f832d8c5
|
IP forwarding: Flesh out TCP, UDP, and ICMPv6 packet forwarding logic.
|
2017-07-05 11:01:16 -06:00 |
|
Gregory Nutt
|
65c3fa6375
|
net/udp: Fix a copy-paste error that could effect networking when both IPv4 and IPv6 are enabled.
|
2017-07-05 07:27:17 -06:00 |
|
Gregory Nutt
|
ffae9f0251
|
include/nuttx/input: Remove bogus, obsolete keypad.h header file.
|
2017-07-04 15:58:39 -06:00 |
|
Jan Pobrislo
|
7999822189
|
I've found that the interrupts aren't enabled since nothing updates them after btn_poll() marks the file descriptor structure as being polling. I've managed to make it work with this change.
|
2017-07-04 14:43:19 -06:00 |
|
Gregory Nutt
|
f07420dedf
|
SAME70-Xplained: Add MRF24J40 support.
|
2017-07-04 14:31:26 -06:00 |
|
Gregory Nutt
|
5e617f8410
|
UDP networking: The TTL (time to live) was not being set in the IPv4 or IPv6 header unless the UDP socket was bound.
|
2017-07-04 12:05:21 -06:00 |
|
Gregory Nutt
|
c0c275c8fc
|
IP forwarding. Adds a little more structure to handle passing packets received on one network device to another network device. Logic is still incomplete.
|
2017-07-04 10:19:52 -06:00 |
|
Gregory Nutt
|
59cb2a280b
|
Merge remote-tracking branch 'origin/master' into ipforward
|
2017-07-04 07:21:50 -06:00 |
|
Gregory Nutt
|
32a96bda6d
|
IPv6 forwarding logic must decrement the TTL and drop the packet if the hop limit is exceeded.
|
2017-07-04 07:05:42 -06:00 |
|
Masayuki Ishikawa
|
5efd942396
|
FS: Remove DEBUGASSERT() in block_proxy() because the flags are cleared later.
|
2017-07-04 10:56:54 +09:00 |
|
Gregory Nutt
|
eba16af7ba
|
Adds a little more IP foward framework
|
2017-07-03 16:22:57 -06:00 |
|
Gregory Nutt
|
856d7e73b7
|
Some compile time fixes
|
2017-07-03 16:22:25 -06:00 |
|
Gregory Nutt
|
eafcf4d059
|
Clean up some conditional logic
|
2017-07-03 16:02:59 -06:00 |
|
Gregory Nutt
|
83a875f394
|
IP forwarding: Add some fragments of TCP forwarding logic.
|
2017-07-03 15:58:01 -06:00 |
|
Gregory Nutt
|
81cd76484f
|
Add some partial IP forwarding logic.
|
2017-07-03 15:34:28 -06:00 |
|
Gregory Nutt
|
5060a7cdf2
|
samv71-xult/mrf24j40: Add reset logic (but comment out because it is not necessary)
|
2017-07-03 13:00:30 -06:00 |
|
Gregory Nutt
|
72c4f12286
|
samv71-xult/mrf24j40-starhub: Reset pins backward; update README.
|
2017-07-03 12:37:37 -06:00 |
|
Gregory Nutt
|
445af2e5a0
|
samv71-xult/mrf24j40-starhub: Should have pull-ups on interrupting inputs.
|
2017-07-03 12:06:17 -06:00 |
|
Gregory Nutt
|
3b697327cc
|
samv71-xult/mrf24j40-starhub: Fix MRF24J40 interrupt pin.
|
2017-07-03 11:51:39 -06:00 |
|
Eetu Nevalainen
|
21dcc8cbc7
|
stm32f40xxx_rtcc ISR register and write protection fix
|
2017-07-03 11:06:07 -06:00 |
|
Gregory Nutt
|
68315b7444
|
Merged clang into master
|
2017-07-03 07:04:57 -06:00 |
|
Gregory Nutt
|
e76c9875a4
|
Make.defs edited online with Bitbucket
|
2017-07-03 13:04:38 +00:00 |
|
Gregory Nutt
|
057b438499
|
samv71-xult/mrf24j40-starhub: Disabled CONFIG_BOARD_INITIALIZE; Correct MRF24J40 interrupt edge.
|
2017-07-03 06:56:47 -06:00 |
|
Gregory Nutt
|
acb0dcecac
|
samv71-xult: Fix a typo in MRF24J40 initialization.
|
2017-07-02 18:36:55 -06:00 |
|
Gregory Nutt
|
56801c3389
|
samv71-xult: Fix SP0 vs. TWHS0 in mrf24j40-starhub/defconfig; fix copy-paste errors in SPI initialization logic.
|
2017-07-02 18:33:31 -06:00 |
|
Jan Pobrislo
|
a8f43e1216
|
stm32f4 discovery: Add logic to register the button driver and the user led driver if so configured
|
2017-07-02 16:40:11 -06:00 |
|
Gregory Nutt
|
41d4958a77
|
Add missing MRF24J40 bring-up logic
|
2017-07-02 15:01:11 -06:00 |
|
Gregory Nutt
|
634b13c143
|
samv71-xult/mrf24j40-starhub: Tweaks to defconfig
|
2017-07-02 14:25:51 -06:00 |
|
Gregory Nutt
|
7d7fd9112d
|
samv71-xult/mrf24j40-starhub: Put the serial console on UART3, i.e., on a Arduino serial shield.
|
2017-07-02 13:06:23 -06:00 |
|
Gregory Nutt
|
5cb3edb552
|
Update some naming used in Documentation
|
2017-07-02 11:27:27 -06:00 |
|
Gregory Nutt
|
09ab651e02
|
samv71-xult: Add support for the MRF24J40 radio and create a mrf24j40-starhub configuration. A few fixes to IPv6 and 6LoWPAN were required to have 6LoWPAN and Ethernet coexisting. Untested and expect some complexity in the bring-up.
|
2017-07-02 11:04:57 -06:00 |
|
Gregory Nutt
|
8fa5e9772b
|
Clang: Should there not be a prefix when using a cross compiler where clang refers to the host clang.
|
2017-07-02 06:51:21 -06:00 |
|
Gregory Nutt
|
cf44fd6ec0
|
Add CLANG definitions in Kconfig and Toolchain.defs
|
2017-07-02 06:42:48 -06:00 |
|
Goran Mekić
|
44bd7d3b7f
|
Initial clang compile
|
2017-07-02 06:24:26 -06:00 |
|
Gregory Nutt
|
0b4a9a0b3d
|
same570-xplained: Refresh configurations.
|
2017-07-01 17:24:40 -06:00 |
|
Gregory Nutt
|
d280f8854e
|
include/nuttx/net and net/: Move private prototype of netdev_foreach() from the public include/nuttx/net/net.h to the private net/netdev/ndetdev.h header file where it belongs.
|
2017-07-01 08:39:39 -06:00 |
|
Gregory Nutt
|
ae1771454a
|
6LoWPAN: TCP send logic was returning a failure in one case when, in fact, the send was successful.
|
2017-06-30 16:07:51 -06:00 |
|
Gregory Nutt
|
7de86f1ab4
|
This change backs out the 'misconception' fix of 76e6dba2e4 and reimplements it in a way that actually seems to work.
|
2017-06-30 12:39:00 -06:00 |
|
Gregory Nutt
|
e19c52ed6e
|
6LoWPAN fix compile issue in star hub configuration.
|
2017-06-30 10:13:31 -06:00 |
|