sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
32,763 Commits 1 Branch 0 Tags 291 MiB
47d87fd857
Commit Graph

550 Commits

Author SHA1 Message Date
Gregory Nutt
a773f9412a STMPE811 driver needs argument in interrupt handler 2017-02-27 11:41:48 -06:00
Gregory Nutt
4539988d00 Removed CONFIG_LIBC_ARCH_BZERO. bzero() is a deprecated interface. There are no architecture-specific replacements and, if there were, they should replace memset(), not bzero(). 2017-02-22 10:41:49 -06:00
Gregory Nutt
1d290c2b37 setvbuf: Add support for disabling I/O buffering. Initially cut; untested. 2017-02-09 09:24:44 -06:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
9ac00a355f Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots. 2017-01-31 09:16:01 -06:00
Gregory Nutt
3c4684ef5f Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename. 2017-01-20 09:30:07 -06:00
Gregory Nutt
4216c4b777 NxWM configurations. If using a 7-bit character set, then the cursor character cannot be 137 (graphic block). Use 95 (underscore) instead. 2017-01-08 09:21:37 -06:00
Gregory Nutt
7035d232f8 NX server: Correct message queue names. Should not be at /dev, but rather relative to /var/mqueue. 2017-01-08 09:14:11 -06:00
Gregory Nutt
e1d9bb2ef2 Refresh all NX multi-user configurations 2017-01-08 08:06:18 -06:00
Gregory Nutt
f063e4c5ac Remove Calypso architecture support and support for Calypso SERCOMM driver. 2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b Remove all Calypso board configurations 2016-12-13 18:24:49 -06:00
Gregory Nutt
c83da3c48f Remove minnsh configurations and support logic: up_getc() and lowinstream. 
This was an interesting exercise to see just how small you could get NuttX, but otherwise it was not useful:  (1) the NSH code violated the OS interface layer by callup up_getc and up_putc directly, and (2) while waiting for character input, NSH would call up_getc() which would hog all of the CPU.  NOt a reasonably solution other than as a proof of concept.
 2016-12-13 18:01:23 -06:00
Gregory Nutt
35dfe25430 Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver. 2016-12-06 08:51:37 -06:00
Gregory Nutt
ee2852f5ff Remove all references to board_adc_setup() 2016-12-05 17:06:08 -06:00
Gregory Nutt
55dd1c87b3 Remove all references to BOARDIOC_ADCSETUP 2016-12-05 15:31:40 -06:00
Gregory Nutt
4b216ff8dd Finish removing traces of BOARDIOC_PWMSETUP 2016-12-05 14:56:21 -06:00
Gregory Nutt
b999e63c82 Remove some references to BOARDIOC_PWMTEST and board_pwm_setup(). Still lots more. 2016-12-05 13:54:12 -06:00
Gregory Nutt
83477c55f8 STM32 Ethernet configurations must have work queue enabled. 2016-12-03 17:06:14 -06:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
c0cbea2550 Remove RGMP and RGMP drivers. 2016-12-02 09:49:33 -06:00
Gregory Nutt
99987a3d51 Increase max message size in all NxWM configurations. 2016-12-02 08:38:42 -06:00
Gregory Nutt
86b5f3b9ed boardctl: Add new command to start the NX server as a kernel thread. Also refresh more configurations. 2016-12-01 15:05:57 -06:00
Gregory Nutt
6dda185e8a NX: Remove configuration CONFIG_NX_NXSTART. nx_start.c is now built unconditionally in multi-user mode. 2016-12-01 13:30:24 -06:00
Gregory Nutt
44e747ebf1 Remove all references to CONFIG_NET_MULTIBUFFER from configs/ 2016-11-29 15:07:30 -06:00
Gregory Nutt
439c72e7c8 Refresh all networking configurations due to changes in work-queue related configuration variables for Ethernet drivers. 2016-11-19 09:41:24 -06:00
Beat Küng
c7da88e383 CXXFLAGS: add -fcheck-new whenever -fno-exceptions is used 
This is to avoid GCC to optimize null-pointer checks away, in case the
default operator new is used together with -fno-exceptions.
 2016-08-22 08:35:01 +02:00
Gregory Nutt
b071e4ce92 Refresh all STM32, EFM32, and SAMV7 configurations for SPI H/W features configuration changes 2016-08-08 12:50:14 -06:00
Gregory Nutt
f43ded46e6 Rename arch/sh to arch/renesas, cont'd 2016-08-06 14:03:38 -06:00
Gregory Nutt
1b9b3a7b47 pwm.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:48:24 -06:00
Gregory Nutt
ddcaa3d425 can.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:38:36 -06:00
Gregory Nutt
2a19e16eb0 libc/hex2bin: Move the portable library portion of apps/system/hex2bin to nuttx/libc/hex2bin where it can be shared with the OS internals. 2016-06-27 11:22:38 -06:00
Gregory Nutt
1377452394 Refresh all ARM configurations 2016-06-23 15:59:14 -06:00
Gregory Nutt
5118264e6c Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG 2016-06-21 09:35:51 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
2b445ddccc Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces. 2016-06-20 08:57:08 -06:00
Gregory Nutt
5b2aa7bf99 Remove all traces of CONFIG_SYSLOG 2016-06-19 13:59:43 -06:00
Gregory Nutt
0c8c7fecf0 Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
Gregory Nutt
03cbe671ad Centralize definitions associated with CONFIG_DEBUG_PWM 2016-06-15 17:23:56 -06:00
Gregory Nutt
63b1eb09e6 Centralize definitions associated with CONFIG_DEBUG_CAN 2016-06-15 15:45:27 -06:00
Gregory Nutt
2ddd57c674 Centralize definitions associated with CONFIG_DEBUG_LEDS 2016-06-15 14:12:19 -06:00
Gregory Nutt
24c51ec1ff Centralize definitions associated with CONFIG_DEBUG_LCD 2016-06-15 11:40:33 -06:00
Gregory Nutt
ba03134bed Centralize definitions associated with CONFIG_DEBUG_SPI 2016-06-15 10:41:13 -06:00
Gregory Nutt
a5457987d8 configs/: Change some err() ERRORS to warn() WARNINGS or info() 2016-06-12 17:02:46 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
89c9aca89e All configurations that have both CONFIG_NSH_LIBRARY=y and CONFIG_NET=y must now also have CONFIG_NSH_NETINIT=y 2016-06-09 09:29:47 -06:00
Gregory Nutt
5c9e11f1b0 Refresh all configurations that have both CONFIG_NSH_LIBRARY and CONFIG_NET set in preparation for another change. 2016-06-09 09:25:20 -06:00
Gregory Nutt
ba0040fe1f NxWM configurations need boardctl() with touchscreen support 2016-06-05 13:18:43 -06:00
Gregory Nutt
f2c65a4c47 Refresh configurations 2016-06-05 12:14:34 -06:00
Gregory Nutt
910bac65fa STM32 Timer: Generalize and extend calculation of per-timer pre-scaler value. Inspired by original proposal from Pierre-noel Bouteville. 2016-06-03 11:38:59 -06:00
Gregory Nutt
a18dbfda6e Remove drivers/mtd/flash_eraseall.c. It is not used in the OS and is just a dumb wrapper around the MDIOC_BULKERASE IOCTL call. 2016-06-02 10:44:13 -06:00
Gregory Nutt
2b47473778 Remove all references to CONFIG_SYSTEM_FLASH_ERASEALL 2016-06-02 10:19:02 -06:00
Gregory Nutt
d89eefc6a5 Refresh all STM32 configurations 2016-05-25 12:39:28 -06:00
Gregory Nutt
9ec104834a Remove CONFIG_USARTn_ISUART 2016-05-25 11:21:48 -06:00
Gregory Nutt
c089a2f241 Rename CONFIG_ARCH_HAVE_OTHER_UART to CONFIG_OTHER_UART_SERIALDRIVER 2016-05-25 10:48:33 -06:00
Gregory Nutt
e2e6ce3f1b Rename CONFIG_ARCH_HAVE_SCIn to CONFIG_SCIn_SERIALDRIVER 2016-05-25 10:46:55 -06:00
Gregory Nutt
2a87741e72 Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER 2016-05-25 10:45:01 -06:00
Gregory Nutt
249a2e48e5 Rename CONFIG_ARCH_HAVE_USARTn to CONFIG_USARTn_SERIALDRIVER 2016-05-25 10:39:23 -06:00
Gregory Nutt
4b3e710af6 Add an argument to board_app_initialize() 2016-05-24 10:51:22 -06:00
Gregory Nutt
8ace1e3be2 Remove all implementatinos of up_wdginitialize(). It is no longer used. 2016-05-18 19:48:42 -06:00
Gregory Nutt
1d2ee34131 SAM WDT: Rename up_wdginitialize() functions to something more appropriate for the internal OS interface. 2016-05-18 19:47:41 -06:00
Aleksandr Vyhovanec
80a9357b6f wfi.mac should be copied into the directory with the IAR project. Then set it to "Options -> Debugger -> Setup macro file(s)". This will allow debugging via JTAG when calling the WFI instruction. 2016-05-17 06:45:00 -06:00
Gregory Nutt
b909099f09 Update some README files 2016-04-10 09:12:00 -06:00
Gregory Nutt
3228d32938 Correct permmisions on executable scripts 2016-04-10 09:11:59 -06:00
Kha Vo
5912c840cb IAR/uVision template and ICF files 2016-04-10 09:11:55 -06:00
Gregory Nutt
4449b95fda Add references to new README files 2016-04-10 09:11:54 -06:00
Kha Vo
db70124478 STM3220G-EVAL: Update README and add project files for building with the IAR or uVision IDEs. 2016-04-10 09:11:53 -06:00
Gregory Nutt
1df1148bae STM3220G-EVAL: Update README.txt file describing how to build using the IAR toolchain 2016-04-10 09:11:52 -06:00
Gregory Nutt
7337e748de Merge in configs/ submodule 2016-04-10 07:57:59 -06:00
Gregory Nutt
3e0efd7279 Fix all URLs to the NuttX repository 2016-04-06 17:56:40 -06:00
Gregory Nutt
99df0f459d All STM32 configurations need to set CONFIG_ARM_TOOLCHAIN_GNU=y 2016-04-02 07:21:25 -06:00
Gregory Nutt
ad61b7ab3e Remove all references to CONFIG_SYSTEM_SDCARD 2016-03-30 17:53:19 -06:00
Gregory Nutt
e5b0c0e502 Remove most unused references to CONFIG_NET_MULTICAST. Rename other uses of CONFIG_NET_MULTICAST to avoid naming comflicts. 2016-03-20 13:15:58 -06:00
Gregory Nutt
4b1c510f6f Refresh all STM32 configurations 2016-03-08 17:03:32 -06:00
Gregory Nutt
f5c987a627 Change name IMX to IMX1 in configuration variable names to make room for i.MX6 2016-02-28 15:19:19 -06:00
Gregory Nutt
12c14ee718 Rename CONFIG_WIRELESS to CONFIG_DRIVERS_WIRELESS 2016-02-26 16:45:29 -06:00
Kha Vo
c71ed665c2 On stm32F2xx gpio is encoded to 20bits but the button definitions use 16bit type. 2016-02-25 11:12:27 -06:00
Gregory Nutt
1699561bb6 Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-13 12:37:46 -06:00
Gregory Nutt
9ed7d56a18 Building of xyz_appinit.c should depend on CONFIG_LIB_BOARDCTL, not CONFIG_NSH_ARCHINITIALIZE 2016-02-04 12:14:17 -06:00
Gregory Nutt
d5cbcc1293 I2C Tool: Now that the I2C tool uses a character driver, the I2C character drivers must be initialized in board bring-up logic 2016-02-02 14:22:54 -06:00
Gregory Nutt
a135df609f Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming 2016-02-02 12:25:14 -06:00
Gregory Nutt
6b449ac409 The I2C_TRANSFER method is no longer optional 2016-01-31 14:15:32 -06:00
Gregory Nutt
1615a5ead0 Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s. 2016-01-30 08:35:50 -06:00
Gregory Nutt
2591281375 Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h 2016-01-30 08:00:01 -06:00
Gregory Nutt
bfe51e3bc7 Move xyz_cxxinitialize.c from nuttx/configs/abc/src to apps/platform/abc/ (where xyz is the processor family and abc is the board) 2016-01-29 11:35:48 -06:00
Gregory Nutt
656e730f8f apps/system/ramtron has been removed. 2016-01-27 10:39:30 -06:00
Gregory Nutt
9f2a839ac3 For STM32 boards, rename up_spiinitialize to stm32_spibus_initialize 2016-01-26 12:21:39 -06:00
Gregory Nutt
4819fc2e8d I2C: Eliminate the I2C_WRITEREAD method 2016-01-26 10:24:36 -06:00
Gregory Nutt
e8ff3c3d59 Mark bash scripts executable 2016-01-23 15:30:45 -06:00
Gregory Nutt
9535c909d3 Rename CONFIG_SYSTEM_INIFILE to CONFIG_FSUTILS_INIFILE 2016-01-20 17:11:48 -06:00
Gregory Nutt
2a5bdf230c Merge remote-tracking branch 'origin/master' into windeps 2016-01-09 16:38:13 -06:00
Gregory Nutt
9e548d34c3 mkdeps.sh and mkdeps.bat have been deleted. All configurations must now use the compiler mkeps prograqm 2016-01-09 16:06:15 -06:00
Gregory Nutt
e46cd30c14 Change use of mknulldeps.sh to mkwindeps.sh 2016-01-09 14:13:44 -06:00
Gregory Nutt
6daa73a945 Remove internal from name of all board header files 2015-12-29 15:44:56 -06:00
Gregory Nutt
b90f5ba7f4 Remove CONFIG_DISCRETE_IO from all defconfig files 2015-12-15 08:41:10 -06:00
Gregory Nutt
c41449b12a Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU 2015-12-14 13:56:56 -06:00
Gregory Nutt
a0e662f769 Refresh all configurations that have Telnetd enabled; those configurations now also need the telnet driver 2015-12-07 10:01:13 -06:00