## Summary
To control the Data/Command Pin on ST7789 SPI Display, the SPI Driver flips the MISO Pin as though it was a GPIO.
To implement this on BL602, we reconfigure MISO from SPI Pin to GPIO Pin on the fly inside `bl602_spi_cmddata()`.
When the SPI Port is deselected (after the SPI operation), we revert MISO back from GPIO Pin to SPI Pin. We implement this inside `bl602_spi_select()`.
[More Details Here](https://github.com/lupyuen/st7789-nuttx#spi-cmddata)
## Impact
This change impacts 3 LCD drivers that call `SPI_CMDDATA()`: ST7735, ST7789, GC9A01.
Previously the BL602 SPI Driver would fail with "SPI cmddata not supported" when the above drivers are used.
After the change, the above drivers will set the LCD Data/Command Pin correctly.
## Testing
We tested this implementation of SPI Cmd/Data with NuttX ST7789 Driver and a Logic Analyser on PineCone BL602:
- [Testing with Logic Analyser](https://github.com/lupyuen/st7789-nuttx#spi-cmddata)
We also tested LVGL with ST7789 on PineCone BL602:
- [Testing with LVGL](https://github.com/lupyuen/st7789-nuttx#run-lvgl-demo)
As for regular SPI Devices that don't require SPI Cmd/Data, we tested `CONFIG_SPI_CMDDATA=y` with Semtech SX1262 SPI Transceiver on PineCone BL602:
- [Testing Cmd/Data](https://github.com/lupyuen/incubator-nuttx/releases/tag/release-2022-03-29)
## Summary
SPI Poll Send `bl602_spi_poll_send()` doesn't send any SPI Data because it doesn't enable SPI Master and it doesn't clear the SPI FIFO. Also it hangs because it loops forever waiting for the FIFO.
We fix this problem by moving the code that enables SPI Master and clears the FIFO, from SPI Poll Exchange `bl602_spi_poll_exchange()` to SPI Poll Send. (Note that SPI Poll Exchange calls SPI Poll Send)
[More Details Here](https://github.com/lupyuen/st7789-nuttx#fix-spi-send)
## Impact
This problem affects all NuttX Drivers that call `SPI_SEND()` on BL602, including the ST7789 Display Driver.
Previously `SPI_SEND()` didn't send any SPI Data and never returns, because it loops forever waiting to receive data.
Now `SPI_SEND()` sends data and returns correctly.
[More Details Here](https://github.com/lupyuen/st7789-nuttx#fix-spi-send)
## Testing
We tested the modified SPI Poll Send with NuttX ST7789 Driver and a Logic Analyser on PineCone BL602:
- [Testing with Logic Analyser](https://github.com/lupyuen/st7789-nuttx#fix-spi-send)
We also tested LVGL with ST7789 on PineCone BL602:
- [Testing with LVGL](https://github.com/lupyuen/st7789-nuttx#run-lvgl-demo)
As for the modified SPI Poll Exchange, we tested with Semtech SX1262 SPI Transceiver on PineCone BL602:
- [Testing SPI Poll Exchange](https://github.com/lupyuen/incubator-nuttx/releases/tag/release-2022-03-25)
The xxx_netinitialize is defined to a function only if
CONFIG_NET=y and CONFIG_NETDEV_LATEINIT=n. Otherwise it
is defined to an empty macro.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
USB EP0 reads data from the fifo but doesn't mark the read
done which adds significant delays. Fix this unnecessary
slowdown due to operation timeouts by finishing the read
properly.
Also add a missing function description to the function
mpfs_ep_set_fifo_size().
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Move the target specific memory map to a separate file so there is no
need to copy&paste the __xxram_start etc linker symbols to each file
that needs them.
Also add MMU flags for I/O and kernel areas, they will be needed
when the kernel runs with virtual addresses also.
Some fields of mstatus were marked as Reserved Writes Preserve Values, Reads Ignore Values (WPRI),
so we must keep its origin value with addition flags.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
In smp system riscv_cpu_boot run in idle task so there is a overlap with the origin coloration range and in used stack.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Fix EP0 stall and resume properly. EP0 wasn't clearly addressed
on stall / resume operations.
Also fix data reads that provide garbage for the first request.
It has always random data as it's completed prior to any read
operation.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Mux USB IO pins one-by-one using package specific pinmux definitions. This avoids accidentally overwriting IO settings for other pins.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
include theis commit:
commit 6ad8917b7e27e5e80fb9268492b9111b17ed2024
Author: Petro Karashchenko <petro.karashchenko@gmail.com>
Date: Fri Jan 28 09:13:23 2022 +0200
lib: fix compilation when strings.h is included
In a systems that provide strings.h and it is included
together with sbi_bitops.h the compilation error appears.
The ffs() and fls() are provided by strings.h
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
and fix this warning:
Error: include/sbi/sbi_bitops.h:47:19: declaration of 'ffs' shadows a built-in function
static inline int ffs(int x)
^~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
PR#5688 review fixes are in this patch. The PR was already
merged so the fixes are addresses here as a separate patch.
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This adds a simple USB device driver for the mpfs. However,
this driver is still at its early phase. Only limited testing
with CDC/ACM has been conducted.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This commit fixes an issue where some peripheral clocks are being
disabled during CPU reset on ESP32-C3.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
They are not really defined and used in any where:
uint32_t up_getmisa(void);
uint32_t up_getarchid(void);
uint32_t up_getimpid(void);
uint32_t up_getvendorid(void);
uint32_t up_gethartid(void);
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
here is the reason:
1.clock_systime_timespec(core function) always exist regardless the setting
2.CLOCK_MONOTONIC is a foundamental clock type required by many places
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
## Summary
A lot of linker scripts were listed twice, once for unix, once for windows.
This PR cleans up the logic so they're only listed once.
## Impact
Any opportunity to use a single source of truth and reduce lines of code is a win!
## Testing
CI will test all build
Fix the CPU1 idle tasks stack corruption since the cpux's idle stack
is loaded from g_cpu_basestack (data section) before, but on this time
it maybe not ready since it is initialized by CPU0, and the value
from g_cpu_basestack is random.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
The image must be placed into:
boards/risc-v/mpfs/icicle/include/boot_romfsimg.h
The image is mounted by mpfs_bringup, which is run by the application
itself, or by board_late_initialize() in the case when
CONFIG_BOARD_LATE_INITIALIZE is defined, e.g. with CONFIG_BUILD_KERNEL
- Add test for mode support, which is architecture dependent
- Add tests for address alignment and region size
- Add option to query for access rights
- The function goes through every PMP entry and tests if an address
range from [base, base+size] has been configured for desired
access rights.
- If several PMP entries match the range and access rights, the
information is combined
- End result is either no access, a partial match was found, or a full
match was found. Details about the partial match are not provided.
The intent for testing access rights and not just blindly applying them
is a case where they are already set in e.g. a bootloader. In this
case, nothing should be done, unless the configuration does not match,
in which case the software must not continue further.
NOTE: THIS ONLY WORKS WHEN KERNEL RUNS IN M-MODE FOR NOW
This frees the PMP for other use, e.g. HART memory separation.
The page tables are statically allocated, 1 per level.
This feature is now behind CONFIG_MPFS_USE_MMU_AS_MPU, because
only the MPFS target supports this (others are not tested).
If the MMU is used for memory separation within a HART, the PMP must
still be configured to allow user access to the memory mapped for the
HART, because PMP *rekoves* access by default. At this point all of
the user memory as well as the kernel RAM are opened.
A more flexible solution for PMP configuration will follow.
The old implementation used the default ld.script for the kernel side
which did not obey the memory.ld limits whatsoever.
Also, provide the user space addresses from the linker script to get rid
of the pre-processor macros that define (incorrect) default values for
the user space composition.
- remove some unneeded includes
- tab/space fixes
- change DEBUGPANIC to PANIC in noreturn function, otherwise it compiles only in DEBUG builds
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
