Summary:
- This commit removes SMP features from nsh/defconfig
because it's still unstable
Impact:
- None
Testing:
- None
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
to avoid the follow link error:
ld: /github/workspace/sources/nuttx/nuttx section `.data' will not fit in region `flash'
ld: region `flash' overflowed by 4 bytes
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that spresense:rndis_smp and spresense:wifi_smp
do not boot due to the recent change in nx_start.c
- As the result of the discussion, I understand that we have to
add CONFIG_BOARD_LATE_INITIALIZE=y for SMP
Impact:
- spresense only
Testing:
- Tested with spresense:rndis_smp and spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
Summary:
- I noticed that Telnet session is sometimes not closed
when tested with nxplayer + command stress test
- The symptom relates to the change of IOB throttling in TCP
but we are still finding the root cause.
- This commit is just a workaround to avoid the issue by
disabling telnet character mode.
Impact:
- spresense:rndis, spresense:rndis_smp only
Testing:
- Tested with nxplayer (HTTP audio streaming) + command stress test
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
corrected setting SDMMC_DCTRL.DTMODE field for block data transfers ending on block count
and for block data transfers ending with STOP_TRANSMISSION command;
stm32_sdio: added more debug messages
Laurent Latil has submitted the ICLA
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Summary:
- This commit adds the following configs to spresense:elf
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_STACK_COLORATION=y
Impact:
- None
Testing:
- Tested with spresense
Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
Gregory Nutt is has submitted the SGA
Michal Lyszczek has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
SPI0 is used for the connection of the LCD controller.
Additional SPI and GPIO signals definitions:
SPI0_NPCS1 - SPI Chip Select, PD25
GPIO_LCD_CD - Command/Data, pin PB2
GPIO_LCD_RST - Reset, pin PB3
boards/arm/samv7/samv71-xult/src/sam_st7789.c is
derived from boards/arm/imxrt/teensy-4.x/src/imxrt_st7789.c
Signed-off-by: Jaroslav Beran <jara.beran@gmail.com>
Summary:
- This commit converts data to the physical address for DMA transfer.
Impact:
- cxd56_imageproc.c and cxd56_audio_dma.c
Testing:
- Not tested
Signed-off-by: Kazuya Hioki <Kazuya.Hioki@sony.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- In order to support the atomic instructions by ldrex/strex instruction
in NuttX SMP, the data or later sections are mapped to the system bus.
Impact:
- Bootloader for Spresense SDK 2.1.0 or later must be installed
- Loops per msec must be adjusted
- Physical address for DMA must be converted with CXD56_PHYSADDR
Testing:
- Will be tested with later commits
Signed-off-by: Kazuya Hioki <Kazuya.Hioki@sony.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
