sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5,067 Commits 1 Branch 0 Tags
Commit Graph

1048 Commits

Author SHA1 Message Date
Gregory Nutt
f8592281a7 STM32 OTG HS DEV (in FS mode): Disable ULPI clock enable in RCC AHB1 Register. If Both ULPI and the FS clock enable bits are set in FS mode, then the ARM never awakens froom WFI due to a chip issue. From Ken Pettit 2014-12-13 07:44:13 -06:00
Gregory Nutt
dd3d417aed STM32 OTGHS Device: Fix for OTGHS core working in FS mode. From Ken Pettit 2014-12-12 07:43:32 -06:00
Gregory Nutt
cb9e3c2bb9 Set the GPIO_SPEED_50MHz on all F2 and F4 SPI pin configurations. This is based on an F411 SPI1 errata but the fixed is generalized to all SPI and all F2 and F4 (let me know if this introduces any other issues). Discovered and fixed by Sebastien Lorquet after much consternation. 2014-12-08 09:51:52 -06:00
Gregory Nutt
6d7106424e STM32: Add MCO configuration for the STM32L1xx. From Jussi Kivilinna 2014-12-02 10:19:37 -06:00
Gregory Nutt
13de352dcd STM32L15: Fix typo in MCO pin definition. From Jussi Kivilinna 2014-12-02 10:18:02 -06:00
Gregory Nutt
f94052de26 Update comments 2014-11-29 15:28:28 -06:00
Gregory Nutt
eace825e3b STM32 F4 I2C: Port Tridge's I2C noise resiliance logic from the PX4 repository. 2014-11-29 13:37:45 -06:00
Gregory Nutt
0d50608eae Fix one warning. There are a couple of others that look like real problems 2014-11-28 11:49:24 -06:00
Gregory Nutt
3d55cd82ee Forgot too add file before last commit 2014-11-27 06:14:09 -06:00
Gregory Nutt
0ad88d9664 Enable support for STM32F102. https://github.com/PX4/NuttX/pull/28.diff 2014-11-27 06:12:35 -06:00
Gregory Nutt
727a7c9e40 Fixes for more issues found by cppcheck 2014-11-24 17:00:26 -06:00
Gregory Nutt
184ebdf191 STM32 F4 OTGHS device controller driver from Brennan Ashton 2014-11-20 07:19:04 -06:00
Gregory Nutt
2330c9c842 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers 2014-11-16 08:10:06 -06:00
Gregory Nutt
bf984b2b3a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
e69e2767ad Correct a typo in the STM32 OTGFS register bit definitions 2014-11-13 10:43:54 -06:00
Gregory Nutt
dc16ffe11a Fix a typo in an I2C header file. From Jahu Niskanen 2014-11-11 07:12:16 -06:00
Gregory Nutt
c65372b80c Support for the STM32F103RG. From Murilo Ponte 2014-11-10 07:48:46 -06:00
Gregory Nutt
5ebc472f43 STM32 Serial: Don't compile up_earlyserialinit() if USE_EARLYSERIALINIT is not define. Otherwise, a macro definition clobbers the function definition 2014-10-28 06:58:37 -06:00
Gregory Nutt
60d2547cd7 Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS 2014-10-27 11:31:16 -06:00
Gregory Nutt
800826ac64 Add framework for EFM32 DMA support -- no logic in place yet 2014-10-24 17:59:13 -06:00
Gregory Nutt
2763da5ddd EFM32: Add IDLE power management hooks. Nothing implemented; just define the hooks 2014-10-22 07:26:31 -06:00
Gregory Nutt
94270a0229 Add ADC pinmap definitions for the STM32 F103R from Lederhilger Martin 2014-10-21 06:48:16 -06:00
Gregory Nutt
d2cf8395f9 stm32: rename spi frame format definition 
This renames the stm32 spi frame format definition to the short description
name as well as the other cr2 register flags.

Note! STM32_SPI3_FRF was never used by nuttx somewhere

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:12:59 -06:00
Gregory Nutt
0aea891272 Enable selection of SPI2 for STM32L15XX in Kconfig. From Jussi Kivilinna 2014-10-16 07:03:23 -06:00
Gregory Nutt
26b42e3f57 Minor update to last Kconfig change 2014-10-15 12:33:37 -06:00
Gregory Nutt
e73b64f5ea Add Kconfig selections for STM32-F4x1RE SPI peripheral 2014-10-15 12:22:04 -06:00
Gregory Nutt
a835387529 Fix file mode on modified files 2014-10-14 15:45:56 -06:00
Gregory Nutt
56841b9e20 Support for the STM32 F411RE from Serg Podtynnyi 2014-10-14 15:42:28 -06:00
Gregory Nutt
7012d13e95 Cosmetic changes to comments 2014-10-10 16:54:47 -06:00
Gregory Nutt
85c75a39b0 Fix a few typos 2014-10-10 11:41:40 -06:00
Gregory Nutt
abc90f0e50 Fix watchdog stop bit usage. From Lazlo 2014-10-10 11:36:50 -06:00
Gregory Nutt
1b1daeb7ef Correct STM32 RTC EXTI bit definition. From Lazlo 2014-10-09 06:25:07 -06:00
Gregory Nutt
db9901e2f9 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
6ab29cbef9 Remove non-functional vestiges of OTGHS in FS mode (including OTGFS2); try to convert the stm32f429i-disco configuration to use OTGHS instead of OTFHS in FS mode (OTGFS2). But I don't have the boards and can't test 2014-10-07 15:25:31 -06:00
Gregory Nutt
6023219078 Integrates OTGHS support into the STM32; Eliminates the older OTGHS in FS mode logic. From Brennan Ashton 2014-10-07 15:05:30 -06:00
Gregory Nutt
362736b377 Add files that implement true high speed support for the STM32 OTGHS peripheral. From Brennan Ashton 2014-10-07 15:01:42 -06:00
Gregory Nutt
7e9c8b5926 STM32 CAN correction suggested by Max Holtzberg 2014-09-24 08:23:05 -06:00
Gregory Nutt
238e18cc0a Move include/nuttx/mm.h to include/nuttx/mm/mm.h 2014-09-24 07:29:09 -06:00
Gregory Nutt
1ca6adadfa More naming changes to get the stm3240g-eval/nxterm configuration building again 2014-09-20 15:53:28 -06:00
Gregory Nutt
52a1f19023 Fixes to avoid some hang conditions using STM32 CAN 2014-09-17 08:35:03 -06:00
Gregory Nutt
442d2adb7a Fix for UART7 and UART8 on STM32 clock enable from Aton 2014-09-11 10:27:40 -06:00
Gregory Nutt
31b8137956 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
ec086adfae Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
10ca085b09 Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
fcd7b9336e Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
10aa9ad087 Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer supported 2014-08-31 10:54:55 -06:00
Gregory Nutt
729bc9f9a7 Various changes/fixes to get configs/stm32f4discovery/kostest working after the big configuration renaming (and after a long period of bit rot) 2014-08-29 16:23:46 -06:00
Gregory Nutt
e11679acf8 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
9be4972862 STM32 FLASH fixes: use size_t instead of uint16_t, make interface more generic. From Freddie Chopin 2014-08-28 09:11:20 -06:00
Gregory Nutt
01566dd322 STM32 serial: MAke uart_devs[] const. From Freddie Chopin 2014-08-22 16:20:52 -06:00