Gregory Nutt
acef552fac
PIC32MZ: Add interrupt controller register definitions
2015-02-24 13:16:04 -06:00
Gregory Nutt
6cf496ee67
PIC32MX: Standardize of naming in comments
2015-02-24 11:32:15 -06:00
Gregory Nutt
f5a0fb060d
PIC32MZ: Add Oscillator header file; Add logic to set up peripheral clocks on reset
2015-02-24 11:16:32 -06:00
Gregory Nutt
354e5a9a11
PIC32MZ: Add beginnings of CPU initialization logic. Still some bad logic for setting up peripheral clocking
2015-02-24 09:30:30 -06:00
Gregory Nutt
15579510e8
PIC32MZ: Fix some PLL setup logic
2015-02-23 17:27:28 -06:00
Gregory Nutt
db10058d27
PIC32MZ: Fix an error in the branch target of the hard-coded power up reset branch
2015-02-23 17:09:57 -06:00
Gregory Nutt
9e92b9041b
PIC32MZ: Most related to start up file a FLASH device configuration setup
2015-02-23 16:36:35 -06:00
Gregory Nutt
cfd139e8af
PIC32MZ: Make sure that the microMIPS ISA is selected on all common MIPS32 assembly files when the PIC21MZ is selected
2015-02-23 12:09:34 -06:00
Gregory Nutt
9a4f360265
PIC32MZ: Resolve a PIC32 dependency in the generic MIPS32 code
2015-02-23 11:56:16 -06:00
Gregory Nutt
b7a8a1f8aa
Finishes PIC32MZ device configuration definitions
2015-02-23 09:58:34 -06:00
Gregory Nutt
d75acb630d
PIC32MZ: Add memorymap and devcfg header files
2015-02-22 16:21:12 -06:00
Gregory Nutt
5559b72abd
PIC32MZ: Framework for startup function. Still has too much PIC32MX garbage in it to be credible
2015-02-22 14:30:53 -06:00
Gregory Nutt
9c9fc13b6c
MIPS: Add some build support for the M14K and also for the PIC32MZ Starter Kit. Still a long way to go
2015-02-22 13:45:59 -06:00
Gregory Nutt
a81ebff6e0
Remove support for obsolete PIC32 toolchain configuration names
2015-02-22 12:14:20 -06:00
Gregory Nutt
024a5cb278
PIC32MZ: Add just enough PIC32MZ logic that we can run 'make menuconfig'
2015-02-22 10:53:24 -06:00
Gregory Nutt
f273bcfa82
Fix a typo that prevents building PIC32... How long has that been there?
2015-02-21 19:41:59 -06:00
Gregory Nutt
c5b3e3e7aa
Current Pinguino toolchain uses prefix p32 instead of mips
2015-02-21 19:41:26 -06:00
Gregory Nutt
8bac6b71ce
SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville.
2015-02-08 06:53:24 -06:00
Gregory Nutt
30b141e2c8
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
2015-01-24 06:49:51 -06:00
Gregory Nutt
9588b0e7a7
All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called
2015-01-21 11:36:33 -06:00
Gregory Nutt
723b7fc430
Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address.
2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896
Networking: Add missing raw/packet socket support to all Ethernet drivers
2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f
Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly.
2015-01-20 06:26:14 -06:00
Gregory Nutt
ac69e11a5f
Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received
2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625
- Rename devif_input() ipv4_input()
...
- Copy net/devif/devif_input.c to ipv6_input.c. Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c. Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541
Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers
2015-01-15 07:07:39 -06:00
Gregory Nutt
2330c9c842
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers
2014-11-16 08:10:06 -06:00
Gregory Nutt
bf984b2b3a
Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday
2014-11-15 08:22:51 -06:00
Gregory Nutt
60d2547cd7
Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS
2014-10-27 11:31:16 -06:00
Gregory Nutt
4b4f3212f3
For PIC32MX7, DEVCFG0 bit 2 must be set
2014-10-09 14:03:54 -06:00
Gregory Nutt
db9901e2f9
Update everything under nuttx/arch to use the corrected syslog interfaces
2014-10-08 12:48:47 -06:00
Gregory Nutt
3dd3b1f5e2
The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object
2014-09-04 13:31:34 -06:00
Gregory Nutt
31b8137956
There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.
2014-09-01 15:39:34 -06:00
Gregory Nutt
ec086adfae
Reanem kzalloc to kmm_zalloc for consistency
2014-08-31 17:34:44 -06:00
Gregory Nutt
10ca085b09
Rename kmalloc to kmm_malloc for consistency
2014-08-31 17:26:36 -06:00
Gregory Nutt
fcd7b9336e
Rename kfree to kmm_free for consistency with other naming conventions
2014-08-31 17:04:02 -06:00
Gregory Nutt
bcb5a5316e
Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming
2014-08-31 16:24:24 -06:00
Gregory Nutt
e11679acf8
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
2014-08-29 14:47:22 -06:00
Gregory Nutt
35b11a7533
Fix an error introduced into ALL implmentations of interrupt dispatch logic
2014-08-28 08:41:57 -06:00
Gregory Nutt
8bdde7b2d1
Add address environment support to ALL implementatins of up_release_pending()
2014-08-28 08:10:19 -06:00
Gregory Nutt
1b24afe6fc
Add address environment support to ALL implementatins of up_reprioritize_rtr()
2014-08-28 07:54:07 -06:00
Gregory Nutt
9c6fea03d0
MIPS: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt
2014-08-28 07:16:14 -06:00
Gregory Nutt
756054d745
Add ADDRENV support to ALL implmentations of _exit()
2014-08-27 16:31:02 -06:00
Gregory Nutt
7055bce8b4
Add ADDRENV support to ALL implementations of up_unblock_task()
2014-08-27 16:15:46 -06:00
Gregory Nutt
5bf114e604
Add ADDRENV support to all implementations of up_block_task()
2014-08-27 15:36:52 -06:00
Gregory Nutt
2bc16b2ba5
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
2014-08-21 11:16:55 -06:00
Gregory Nutt
6455f60c60
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
2014-08-08 18:39:28 -06:00
Gregory Nutt
4dc151097e
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
2014-08-08 17:53:55 -06:00
Gregory Nutt
c98ece6bec
Move task control files from sched/ to sched/task
2014-08-08 16:44:08 -06:00
Gregory Nutt
1c99d53bb1
Move clock functions from sched/ to sched/clock
2014-08-08 14:43:02 -06:00
Gregory Nutt
39183d37b8
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
2014-08-07 18:00:38 -06:00
Gregory Nutt
594083d870
Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined.
2014-08-06 16:26:01 -06:00
Gregory Nutt
d7fe256821
NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed.
2014-07-04 19:13:08 -06:00
Gregory Nutt
99ce3a44d7
Remove all inclusion of uip.h
2014-07-04 16:58:22 -06:00
Gregory Nutt
11e3a21411
NET: More renaming
2014-07-04 15:40:49 -06:00
Gregory Nutt
313982ba18
NET: Rename XYZ_uiptxpoll to just XYZ_txpoll
2014-07-01 18:41:08 -06:00
Gregory Nutt
621ec21bfd
Rename uip_poll->devif_poll and uip_timer->devif_timer
2014-06-30 18:40:41 -06:00
Gregory Nutt
ade8807a61
Rename uip_input to devif_input
2014-06-30 18:11:17 -06:00
Gregory Nutt
e4990dda4d
Rename uip_driver_s net_driver_s
2014-06-27 16:48:12 -06:00
Gregory Nutt
57383ea2f3
Rename ip_eth_hdr to eth_hdr_s
2014-06-25 09:57:52 -06:00
Gregory Nutt
11896e1481
Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h
2014-06-24 10:14:15 -06:00
Gregory Nutt
b34a1f1e01
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h
2014-06-24 09:28:44 -06:00
Gregory Nutt
00667926a9
Move include/nuttx/net/uipopt.h to include/nuttx/net/netconfig.h
2014-06-24 08:53:28 -06:00
Gregory Nutt
407e72b300
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_
2014-05-30 12:13:06 -06:00
Gregory Nutt
8dbc4714c5
Change all variadic macros to C99 style
2014-05-22 09:01:51 -06:00
Gregory Nutt
bac1ab9a34
Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith
2014-05-20 17:48:39 -06:00
Gregory Nutt
af2bb81ac2
Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna
2014-05-08 09:00:33 -06:00
Gregory Nutt
ae82fa65a6
Fix spelling, only one t in exiting
2014-04-27 15:49:38 -06:00
Gregory Nutt
25d4ff745b
More trailing whilespace removal
2014-04-13 16:22:22 -06:00
Gregory Nutt
c708eff608
Make sure that there is one space after for
2014-04-12 13:28:22 -06:00
Gregory Nutt
33d5d24964
Make sure that there is one space between while and condition
2014-04-12 13:09:48 -06:00
Gregory Nutt
66df3afd46
mv ramlog.h and syslog.h to new include/nuttx/syslog
2014-04-10 09:29:30 -06:00
Gregory Nutt
5b9f1f54c2
Add option to dump buffered USB trace data on an assertion
2014-03-20 10:56:30 -06:00
Gregory Nutt
07454e9241
configs/pic32-starterkit/nsh converted to use the kconfig-frontends tools
2014-03-01 11:10:30 -06:00
Gregory Nutt
74c50c12de
configs/mirtoo/nsh converted to use the kconfig-frontends tools
2014-03-01 10:49:19 -06:00
Gregory Nutt
a26b03d0d0
rename up_led*() functions to board_led_*()
2014-01-24 14:28:49 -06:00
Gregory Nutt
231889c888
The optimization level can now be selected as part of the configuration
2014-01-24 07:45:35 -06:00
Gregory Nutt
f53f269a84
Kconfigs: Interrupt prioritization should not be automatically selected
2013-12-20 08:42:54 -06:00
Gregory Nutt
d01808c603
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
2013-12-05 10:37:55 -06:00
Gregory Nutt
b8085906b9
Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane
2013-11-01 11:16:51 -06:00
Gregory Nutt
4aaee6fb3c
Clean up some naming: fd vs. fildes vs. filedes and filep vs filp
2013-09-28 16:50:07 -06:00
Gregory Nutt
52b0a16cd3
Move CONFIG_NET_DUMPPACKET from LPC17 and STM32 to commong network drivers. Automatically enabled CONFIG_NETDEVICES when any Ethernet driver is enabled
2013-09-25 11:50:05 -06:00
Gregory Nutt
82cd614b66
Add prefex ETH0 to all PHY configurations to support multiple NICs
2013-09-17 10:45:07 -06:00
Gregory Nutt
56f9092a87
Fix all occurrences of "the the" in documentation and comments
2013-08-27 09:40:19 -06:00
Gregory Nutt
dfe6452b8e
Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes
2013-08-11 17:11:32 -06:00
Gregory Nutt
2f772c84fd
Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_
2013-07-26 10:09:17 -06:00
Gregory Nutt
a954eb76b2
Created new directories to hold SPI-related files
2013-07-01 08:11:54 -06:00
Gregory Nutt
8ff1402958
.dSYM only needs to be in the same .gitignore files as .exe
2013-05-30 15:02:04 -06:00
Gregory Nutt
f0c36e422f
Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files
2013-05-30 14:45:31 -06:00
Gregory Nutt
34c9e7284b
Fix null packet handling in the PIC32 USB device driver. This is a critical bug fix for PIC32. Add support for the USB monitor to the Sure-PIC32MX configuration
2013-05-28 13:36:01 -06:00
Gregory Nutt
03478d02aa
Fix Sure PIC32 LOOPSPERMSEC
2013-05-27 16:29:41 -06:00
Gregory Nutt
f7ef927019
Converted all configurations to use the kconfig-frontends tools, cleaned up the directory structure and naming to match some of the more recent configurations, and added a segment LCD driver for the board. The initial checkin of the LCD driver is just a clone of configs/pcblogic-pic32mx/src/pic32mx_lcd1602 and it not yet expected to be functional.
2013-05-26 16:44:53 -06:00
Gregory Nutt
3aa94411be
Remove up_assert_code
2013-04-25 15:19:59 -06:00
Gregory Nutt
91e6580aff
Adding missing registration of /dev/zero; Condition registration of /dev/null. From Ken Petit
2013-04-24 07:17:49 -06:00
Gregory Nutt
803a860d34
New Kconfig convention: Extra indentation in comments will render as HTML preformatted text
2013-04-22 09:10:58 -06:00
Gregory Nutt
65fec0683a
_exit() should not call atexit() or on_exit() functions; Rename task_deletecurrent() to task_exit()
2013-04-18 16:15:20 -06:00
Gregory Nutt
1a07e950ea
Move LPC17xx IOCON register definitions from lpc17_gpio.h to lpc17_iocon.h; fix a few more .gitignore files
2013-04-04 18:12:44 -06:00
Gregory Nutt
1694955188
Clone svn:ignore directory atributed to .gitignore files
2013-04-04 14:27:29 -06:00
patacongo
e29d6479c9
Corrections needed after further test of stack-based task arguments
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5771 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 23:37:11 +00:00
patacongo
c496b7aad9
Copy siginfo_t to step before calling a user-space signal handler
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5769 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 20:02:14 +00:00