Gregory Nutt
6f8335ea87
Minor updates to README files
2015-04-10 11:33:01 -06:00
Gregory Nutt
50aa1e0939
Modbus: Misc cleanup
2015-04-07 12:16:15 -06:00
Gregory Nutt
4d5cb13c9d
STM32 RTCC: Make back-up register and magic value used by RTCC configurable. From David Sidrane
2015-04-06 16:26:59 -06:00
Gregory Nutt
141846c6bf
Update TODO list and a README
2015-04-05 09:51:38 -06:00
Gregory Nutt
fca4c51420
Update comments and README
2015-04-05 07:22:46 -06:00
Gregory Nutt
cf4bbae526
SAMV7: Fix SDRAM initialization instabiilties by changing the order of initialization
2015-04-04 19:58:31 -06:00
Gregory Nutt
62337a656f
Update README
2015-04-04 19:22:26 -06:00
Gregory Nutt
209084de66
SAMV71-XULT: Enable SDRAM and the RAM test in the nsh configuration
2015-04-04 19:04:54 -06:00
Gregory Nutt
d1d96bada1
SAMV71-XULT: Tried the SDRAM test again. Found one bug, but it still fails
2015-04-04 18:09:10 -06:00
Gregory Nutt
77e86521c8
SAMV71-XULT: Some improved naming
2015-04-04 14:05:42 -06:00
Gregory Nutt
02beb0d449
More renaming: up_lcdinitialize->board_lcd_initialize, up_lcdgetdev->board_lcd_getdev, up_lcduninitialize->board_lcd_uninitialize
2015-04-04 11:49:15 -06:00
Gregory Nutt
c2f6a95332
SAMV17-XULT: Can't use UART3 when LCD is conencted, switch to USART0
2015-04-04 08:43:41 -06:00
Gregory Nutt
5b03d5052d
More updates to README file
2015-04-03 20:12:30 -06:00
Gregory Nutt
e78e762dd6
Add a very basic driver for the CS2100-CP Fractional-N Multipler chip.
2015-04-02 13:00:10 -06:00
Gregory Nutt
6342459cdb
SAMV7 WM8904: Leverage WM8904 logic from the SAMA5D4-EK
2015-04-01 12:13:51 -06:00
Gregory Nutt
eb21ad0cf2
SAMV71-XULT: Add option to support connection of the maXTouch Xplained Pro on the 50-pin LCD connector
2015-03-31 09:01:38 -06:00
Gregory Nutt
c76373280b
SAMV71-XULT: Add a configuration for testing the maXTouch Xplained Pro connected to the board
2015-03-30 15:31:53 -06:00
Gregory Nutt
157c56d081
Update README
2015-03-30 07:33:48 -06:00
Gregory Nutt
dab3dbc75b
Cortex-M7: Add support for enabled the D-Cache in write only mode.
...
SAMV7 Ethernet: I- and D-Cache are now enabled in the netnsh/ configuration. D-Cache is enabled in write-though mode. This mode is necessary because the DMA descriptors are each 8-bytes in size but the D-Cache cache line is 32-bits in size. So it is impossible make coherency for every 8-byte DMA descriptor without write-through.
2015-03-29 14:42:03 -06:00
Gregory Nutt
4593fe3797
SAMV7/Cortex-M7: Add support for write through D-Cache. SAMV7 Ethernet look like it needs this
2015-03-29 13:09:22 -06:00
Gregory Nutt
b1dcacebe7
Minor update to a README
2015-03-29 07:04:39 -06:00
Gregory Nutt
ce34402dac
SAMV71-XULT: netnsh configuration is back to -O2
2015-03-28 14:54:30 -06:00
Gregory Nutt
d2fd139ebc
SAMV7 EMAC: Fix alignment issue: RX buffers need to be invalidated. This means the alignment of buffers must be at least to the data cache line size at both ends of the buffer
2015-03-28 13:09:01 -06:00
Gregory Nutt
d7dbdfef58
SAMV7 EMAC: Sometimes TX is not started when TSTART is set??? Workaround seems to be to set it twice. Restored full optimization. Also CONFIG_NET_NOINTS is set so that interrupt level provessing is avoided
2015-03-28 09:42:45 -06:00
Gregory Nutt
756d19ff28
SAMV71-XULT: Add a network-enabled NSH configuration
2015-03-27 14:18:13 -06:00
Gregory Nutt
79734c3c13
SAMV7 Ethernet: Fix some errors in circular queue handling
2015-03-27 13:04:43 -06:00
Gregory Nutt
66670c1738
SAMV7 Ethernet+USB Updates
2015-03-27 10:47:03 -06:00
Gregory Nutt
3c433f7f35
Updated comments/README
2015-03-26 12:33:03 -06:00
Gregory Nutt
6156d5f2fe
SAMV71-XULT: Add support for a ConfigData device on the 256 AT24 EEPROM
2015-03-19 14:53:05 -06:00
Gregory Nutt
480bb3c395
Cosmetic update to README
2015-03-17 17:10:44 -06:00
Gregory Nutt
714af6ebb8
SAMV7 Ethernet: Support getting IP address from the XULT AT24 EEPROM
2015-03-17 14:29:41 -06:00
Gregory Nutt
32aadd9cc2
SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling
2015-03-16 13:51:37 -06:00
Gregory Nutt
f60f22258a
Trivial update to FAT, comments, README
2015-03-15 15:06:17 -06:00
Gregory Nutt
28ead380ea
This commit enables HSMCI functionality in the SAMV71-XULT. TX DMA is, unfortunately, currently disabled.
2015-03-15 12:17:39 -06:00
Gregory Nutt
ccc19408f2
Update README files
2015-03-15 10:22:14 -06:00
Gregory Nutt
3b0615ece8
SAMV7: More SDRAM logic. It does still does not work
2015-03-14 13:27:00 -06:00
Gregory Nutt
361d4a3fac
SAMV71-XULT: Bring HSMCI and auto-mounter support from SAMA5D4-EK
2015-03-13 09:27:16 -06:00
Gregory Nutt
b4b59f928f
Minor update to README
2015-03-12 13:43:54 -06:00
Gregory Nutt
da3233a527
SAMV71-XULT: Enable I2C and the I2C tool in the NSH configuration
2015-03-12 12:27:06 -06:00
Gregory Nutt
90bc4b81ee
SAMV7-XULT: Integrate button support and apps/examples/buttons into the NSH configuration
2015-03-11 14:41:58 -06:00
Gregory Nutt
1a68ee6824
Update README
2015-03-11 12:32:00 -06:00
Gregory Nutt
da844f1a88
SAMV71-XULT: Switch to the ARM GNU tools for Embbeded tools that actually support Cortex-M7
2015-03-11 12:16:27 -06:00
Gregory Nutt
508d96b571
SAMV7-XULT: Enable I- and D-caches, correct polaty of LEDs
2015-03-11 11:23:19 -06:00
Gregory Nutt
e2a6b7f5b0
SAMV7-XULT: Switch back to the CodeSourcery tools
2015-03-11 10:24:43 -06:00
Gregory Nutt
834072815b
SAMV71-XULT: Some bugfixes from early bring-up work
2015-03-10 16:11:28 -06:00
Gregory Nutt
4c6057eca1
mq_timedsend(): Do check for time errors if the message queue is not full. Noted by Freddie Chopin
2015-03-10 09:42:35 -06:00
Gregory Nutt
1b4e32ef20
Update README
2015-03-09 19:58:59 -06:00
Gregory Nutt
cfca6b08c5
SAMV71-XULT: Add support for on-board LEDs. Includes partial support for on-board buttons. Some corrections fo to egg-stk37000 and sam4e-ek discovered during leveraging. Add board READEM.txt file
2015-03-09 08:23:09 -06:00
