Commit Graph

157 Commits

Author SHA1 Message Date
Gregory Nutt
8669183852 sched/pthread and task: When a pthread is started, there is a small bit of logic that will run on the thread of execution of the new pthread. In the case where the new pthread has a lower priority than the parent thread, then this could cause both the parent thread and the new pthread to be blocked at the priority of the lower priority pthread (assuming that CONFIG_PRIORITY_INHERITANCE is not selected).
This change temporarily boosts the priority of the new pthread to at least the priority of the new pthread to at least the priority of the parent thread.  When that bit of logic has executed on the thread of execution of the new pthread, it will then drop to the correct priority (if necessary) before calling into the new pthread's entry point.
2016-10-01 11:38:22 -06:00
Gregory Nutt
18ce4ff57b sched/: Review and correct some stylistic inconsistencies 2016-08-07 08:25:30 -06:00
Gregory Nutt
830af912a1 Add sig_raise() 2016-07-04 09:32:36 -06:00
Gregory Nutt
f3ec664f63 Debug output level (error, warning, info) is now selectable on a per-subsystem, per-driver basis 2016-06-12 13:08:23 -06:00
Gregory Nutt
13cac3b592 sched/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-11 16:42:42 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
143d287f11 Fix some missing header file inclusions and a misplaced semi-colon from recent commits 2016-02-21 11:27:55 -06:00
Gregory Nutt
5a590e99b9 Add SYSCALLS for pthread_setaffinity() and pthread_getaffinity() 2016-02-19 18:13:06 -06:00
Gregory Nutt
1b5e296cf2 Add pthread_setaffinity() and pthread_getaffinity() 2016-02-19 17:59:19 -06:00
Gregory Nutt
a633353ec3 Add a CPU affinity set to the TCB if SMP is enable and use this CPU set as a mask for determining which CPUs the thread may run on. Add an affinity field to the attrributes to permit controlling which CPUs a pthread may run on. Implements pthread_att_setaffinity_np() and pthread_attr_getaffinity_np(). 2016-02-19 17:33:35 -06:00
Gregory Nutt
3994b094c5 Remove some empty C file section comments; Update some text in TODO file 2016-02-19 10:01:15 -06:00
Gregory Nutt
6e3107650d nuttx/sched: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-14 08:17:46 -06:00
Gregory Nutt
74db48202e sched/: Replace explict references to g_readytorun with indirect references via the this_task() macro 2016-02-06 17:44:41 -06:00
Gregory Nutt
48da5aa496 sched/pthread/: CRITICAL BUGFIX: Logic was wiping out the indication that of the type of a pthread. Hence, it could be confused as a task. Found because this was causing a crash when /proc/nnn/cmdline was printed. 2015-11-28 10:05:36 -06:00
Gregory Nutt
78ae661223 One more trivial spacing issue 2015-10-07 20:13:49 -06:00
Gregory Nutt
79d554939e sched/: Fix some spacing issues 2015-10-07 19:59:14 -06:00
Gregory Nutt
16b32bbadd Standardize the width of all comment boxes in C files 2015-10-03 07:25:53 -06:00
Gregory Nutt
5b51a9fcdd Standardize the width of all comment boxes in C files 2015-10-02 17:43:18 -06:00
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Gregory Nutt
768d892188 Add si_errno to siginfo_t 2015-08-14 10:10:32 -06:00
Anton D. Kachalov
4a16bc6924 [sched/pthread/pthread_kill] Add missed header for enabled CONFIG_SCHED_HAVE_PARENT
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-30 18:51:37 +03:00
Gregory Nutt
27e21710fd This is basically a complete redesign of the sporadic scheduling logic due to limitations in the initial design 2015-07-25 12:50:53 -06:00
Gregory Nutt
a1031417e8 Comment out part of sporadic scheduler logic: Part of replenishment logic is bogus 2015-07-24 18:18:58 -06:00
Gregory Nutt
ea7dbc984b Add basic sporadic schedule state machine 2015-07-24 09:03:21 -06:00
Gregory Nutt
3b1306078b Sporadic Scheduler: Ensure that the replenishment period is greater than or equal to the budget period 2015-07-23 15:08:41 -06:00
Gregory Nutt
5baa738019 Most cosmetic, but includes some fixes to some range checking 2015-07-23 14:36:49 -06:00
Gregory Nutt
9095e8eab4 include/, sched/, and libc/: Add support for sporadic scheduling parameters in struct sched_param, posix_spawnattr_t, and pthread_attr_t. Update all user interfaces to pass sporadic scheduling parameters. Feature is dependent on EXPERIMENTAL and no changes have yet been made to core scheduling logic. 2015-07-23 13:16:32 -06:00
Gregory Nutt
aa90da2bc8 pthread_create: Fix an (unlikely) error in fallback value in the event of a failure (which should never occur) 2015-07-23 11:25:25 -06:00
Gregory Nutt
146bdc3c93 TCB: Increase the size of the scheduling policy field from 1 to 2 bits to allow additional, planned scheduling policies 2015-07-23 10:15:07 -06:00
Jussi Kivilinna
13d9383679 Group binding needs to be cleared before sched_releasetcb(), as otherwise group_leave() will be called and group->tg_nmembers decremented or group being released. group_leave() should be called only after group_join() is called, not after group_bind(). From Jussi Kivilinna. 2015-07-01 06:24:34 -06:00
Juha Niskanen
e1846dff82 sched/pthread: Implement pthread_mutex_trylock() for recursive mutexes 2015-06-16 08:32:20 -06:00
Juha Niskanen
d16053c33c sched/pthread: Use -1 instead of 0 as PID for unclaimed mutexes 2015-06-16 08:27:38 -06:00
Gregory Nutt
cc77a28f40 If HAVE_GROUP_MEMBERS is not defined, then pthread_kill() really is the same as kill() 2015-05-13 20:34:21 -06:00
Gregory Nutt
4417728955 Re-implemened pthread_kill(). It as just a simple wrapper around kill() but since the correct dispatching of singles for multi-threaded task groups has been implemented, calling kill() does no work. The corrected implementation of pthread_kill() will direct the signal specifically to the specific pthread and no other. 2015-05-13 14:43:43 -06:00
Gregory Nutt
8cb4e78a1a Complete implementation of the IPv6 routing logic. From Max Neklyudov. 2015-05-13 07:22:02 -06:00
Gregory Nutt
b4423c1eed Make some file section headers more consistent with standard 2015-04-08 06:47:36 -06:00
Gregory Nutt
937f9f23f1 strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8. 2014-12-17 12:24:02 -06:00
Gregory Nutt
322f9f401c Simplify how C source files are selected in the build 2014-10-07 07:42:36 -06:00
Gregory Nutt
e953fb11cd A const storage class to to phthread parameters. From Freddie Chopin 2014-09-08 06:21:48 -06:00
Gregory Nutt
1822b86373 Fix some conditional compilation in kernel build mode. And, while we are touching this logic, make g_default_pthread_attr const. 2014-09-07 10:46:58 -06:00
Gregory Nutt
205260d5e2 Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
e3ff0689bb Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
0ab1b0de25 nuttx/sched: Remove explicit references to errno. That is a problem from within the kernel for certain configurations 2014-08-28 17:00:24 -06:00
Gregory Nutt
d35723749b Minor address environment clean-up. Cannot generate debug contexts in certain contexts 2014-08-27 14:22:00 -06:00
Gregory Nutt
1624e2fbcf Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support 2014-08-24 06:42:11 -06:00
Gregory Nutt
e79d6e3c8b A few fixes for compilation errors due to recent address environment fixes 2014-08-22 15:55:00 -06:00
Gregory Nutt
1d586e6136 An address environment is the property of a task group, not of a thread 2014-08-22 12:32:34 -06:00
Gregory Nutt
ad9b3f8ab8 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
e1769b22f1 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
d798dd37a7 Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
23a334c066 Move task control files from sched/ to sched/task 2014-08-08 16:44:08 -06:00
Gregory Nutt
d4b56eb3cc Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
0f318e9249 Move watchdog functions from sched/ to sched/wdog 2014-08-08 14:21:48 -06:00
Gregory Nutt
4ff17b3904 Move group logic from sched/ to sched/group 2014-08-08 14:06:42 -06:00
Gregory Nutt
e10a23ae50 Move environment files from sched/ to sched/environ 2014-08-08 13:53:29 -06:00
Gregory Nutt
cb79407ced Move all pthread files from sched/ to sched/pthread 2014-08-08 12:55:02 -06:00