Jeff
4cbde22992
I'm working on bringing up USB full-speed support on STM32F405. My board does not include a USB power switch, VBus sensing, over current detection, or ID pin.
...
This commit add a config STM32_OTGFS_VBUS_ CONTROL which lets us selectively disable VBus sensing and control. I also sneaked in a change to disable the configgpio call for the ID pin, which is only used in OTG mode which isn't supported yet. The only pins that need to be initialized should be OTGFS_DP and OTGFS_DM.
These changes let a USB mouse enumerate on my platform if it's plugged in on power-up. Plugging, unplugging, clicking, or moving the mouse cause NSH to stop responding. Because I'm using the ramlog, I don't have useful debug messaging yet, so there's a lot more work I have to do to troubleshoot it or get my JTAG debugging set up, but these patches shouldn't hurt anything. I'm hoping my issue is something simple I overlooked in configuration.
I'm planning to add similar changes for the OTGHS peripheral (using integrated full speed phy) but I still need to test those changes before submitting patches.
2017-08-07 10:24:31 -06:00
Gregory Nutt
1ac4848686
Spirit bugfixes: Was hanging occasionally because there was not mechanism to restart the poll timer if poll was not performed because Spirit ws busy. Fixed by not checking if Spirit is busy. The TX poll can be performed asynchronouly while spirit is busy; any outgoing data will queued until Spirit is ready. Fixed handling of a timeout condition. Failure to transmition to the TX state would fail (timeout) if in a race condition Spirit already committed to the RX state. The driver needs to recover the state properly and avoid debug assertions in this event.
2017-08-07 09:22:16 -06:00
Gregory Nutt
baf4c0d011
Minor change to last PR: errno should not be modified if no error occurred.
2017-08-07 06:33:53 -06:00
Masayuki Ishikawa
1dfed49a3c
Merged in masayuki2009/nuttx.nuttx/smp_test (pull request #451 )
...
sched/: Fix return value in sched_setaffinity()
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-08-07 09:24:09 +00:00
Masayuki Ishikawa
4530a72379
sched/: Fix return value in sched_setaffinity()
2017-08-07 15:00:31 +09:00
Gregory Nutt
e57a5755cc
TX timeout must also be cancelled on a TX error. TX timeout should check if we are waiting for a TXto complete. TX timeout was too short (short than the maximum number of retries).
2017-08-06 16:56:02 -06:00
Gregory Nutt
bbf1ad4ea6
Spirit network driver: TX timeout was never being cancelled! Also reviewed and cleaned up all error handling logic
2017-08-06 15:40:37 -06:00
Gregory Nutt
3c6981534f
Networking: Move INET socket interface out of net/sockets to its own directory net/inet
2017-08-06 14:48:19 -06:00
Gregory Nutt
48a507c0b7
6LoWPAN: When obtaining the radio MAC address from the IP address, handle the special case of broadcast and multicast address.
2017-08-06 13:50:48 -06:00
Alan Carvalho de Assis
cb44833599
STM32F103-Minimum: (1) Enable CONFIG_MTD_PARTITION in Kconfig if flash partition is enabled and (2) Update the README.txt file with info needed to get SmartFS working.
2017-08-06 12:14:29 -06:00
Gregory Nutt
91cfe6c9be
Spirit radio: Dropping packet size to 94 seems to fix problem with CRC failures.
2017-08-06 12:02:55 -06:00
Simon Piriou
38569d50fb
b-l475e-iot01a: add basic support for external Macronix QuadSPI flash memory
2017-08-06 10:52:12 -06:00
Simon Piriou
b1f50490bd
MTD: Add driver for Macronix QuadSPI flash memory
2017-08-06 10:51:17 -06:00
Alan Carvalho de Assis
0a4650d1ee
STM32F103-Minimum: Add support for SmartFS on Winbond W25 SPI NOR Flash
2017-08-06 10:38:55 -06:00
Gregory Nutt
9a53a2f64a
Spirit: Restore the 96 byte maximum packet length. Reducing the packet length had no effect on eliminating RX FIFO errors.
2017-08-06 10:31:50 -06:00
Gregory Nutt
84001f79a0
Spirit Network Driver: Add support for watermark interrupts on RX FIFO. Reduce max packet length to avoid an errata.
2017-08-06 10:10:55 -06:00
Gregory Nutt
3b1e2ac4fd
Spirit network driver: Restructure threading to reduce locking. Still get a few RX FIFO errors.
2017-08-06 08:26:51 -06:00
Ivan Ucherdzhiev
aac877a268
STM32F746-Disco: Add ADC3 support.
2017-08-05 12:54:42 -06:00
Gregory Nutt
4c1a8170de
Update README.
2017-08-05 12:48:07 -06:00
Gregory Nutt
2947ca06c9
Avoid some harsh, inappropriate DEBUGASSERT's.
2017-08-05 12:32:31 -06:00
Gregory Nutt
7ed665833f
IEEE 802.15.4 network drivr: Fix more compile issues that only show up when CONFIG_NET_STARPOINT is defined.
2017-08-05 10:18:34 -06:00
Gregory Nutt
75ffb5b0e6
IEEE 802.15.4 network driver: Fix some errors introduced in previous commit. Clean up some of the casting logic.
2017-08-05 10:09:09 -06:00
Gregory Nutt
183ed7a206
6LoWPAN: Fix some typos introduced in previous commit.
2017-08-05 09:26:48 -06:00
Gregory Nutt
a29a168086
Spirit + 6LoWPAN: In STAR configuration, Spirit must use a configured well known hub address. 6LoWPAN cannot assume that the PAN coordinator is the STAR hub; it must ask the radio to provide it with the address of the star hub
2017-08-05 09:13:29 -06:00
Gregory Nutt
c2fbef2062
b-l475e-iot01a: Add configurations to support a star topology.
2017-08-05 07:53:55 -06:00
Gregory Nutt
c07daace32
B-L475E-IOT01A: Make spirit-6lowpan configuration match what is currently under test: Enable multicast, broadcast, but disable CRC support. Currently CRCs are not working right.
2017-08-04 15:26:04 -06:00
Gregory Nutt
5d96385c52
Spirit: Increase number of retries if there is no acknowledgement; Add interrupt handling for the case where the max number of retries expires. Fix some badly implemented queue management code. With these changes the basic UDP and TCP tests work.
2017-08-04 15:20:10 -06:00
Gregory Nutt
8027d1bf18
Spirit: Enable AutoACK, TX retries, and RX timeouts in the network driver.
2017-08-04 13:16:07 -06:00
Jeff
25e4fb2886
tools/mkdeps.c: Eliminate a warning. MAX_PATH may already be defined in included system files.
2017-08-04 12:25:38 -06:00
Gregory Nutt
44c59f7533
Update a README
2017-08-04 12:19:59 -06:00
Gregory Nutt
0d551cd0ac
Spirit: Convert network driver to use STack packets vs. Basic packets. We need to use the STack packets in order to provide the source address.
2017-08-04 12:19:59 -06:00
Gregory Nutt
df51b69895
Spirit: Commit some trivial changes in preparation for a more substantial change.
2017-08-04 12:19:59 -06:00
Gregory Nutt
733d96cf81
Spirit: Correct setting of the length width field; Add multicast and broadcast addresses to radio properities.
2017-08-04 12:19:59 -06:00
Gregory Nutt
f6ebcc2220
Spirit network driver: Need to enable sending of TX address. Moved some non-optional settings out of board.h to driver.
2017-08-04 12:19:58 -06:00
Gregory Nutt
e8738e1f55
Minor update to some comments.
2017-08-04 09:00:58 -06:00
Gregory Nutt
bbc06dcd8e
RAMTRON: Should be able to select chunked write mode via a configuration option, not by editing the file.
2017-08-04 08:49:07 -06:00
Boris Astardzhiev
79ee0a5209
RAMTRON: Add support for splitting block writes in chunks. Some Re-RAMs like MB85AS4MT has a write buffer size limitation.
2017-08-04 08:12:59 -06:00
Jussi Kivilinna
9fc5f44ef6
syslog: CONFIG_CLOCK_MONOTONIC
2017-08-04 08:02:52 -06:00
Juha Niskanen
0113b0db95
drivers: handle I2C_TRANSFER return value consistently. Some I2C peripherals transfers return zero on success, others number of completed transfers. Make drivers robust against this.
2017-08-04 07:31:36 -06:00
Gregory Nutt
4cc13f8d94
Simulator: x86 stack needs to be aligned to 16-byte boundaries.
2017-08-04 07:03:39 -06:00
Gregory Nutt
36e7a18181
spirit: Modify reg needs to toggle CS to get the correct status. Remove some delbug left in last commit. make sprit_unlock an inline function.
2017-08-03 15:15:15 -06:00
Gregory Nutt
d2b5078e01
Spirit: Mostly cosmetic fixes to names and comments. Tx timeout should run on the HP work queue.
2017-08-03 11:47:38 -06:00
Gregory Nutt
76c9ef4844
Spirit: Fix a few RX-related issues.
2017-08-03 11:08:33 -06:00
Jussi Kivilinna
81b5118727
mm_mallinfo: do heap end debug assert check with heap semaphore held
2017-08-03 10:01:26 -06:00
Jussi Kivilinna
027a446158
poll: fix poll for regular files and block devices. Open Group documentation tells that poll (and select) support regular files and that 'Regular files shall always poll TRUE for reading and writing'.
2017-08-03 09:58:20 -06:00
Gregory Nutt
b3e788e11b
Spirit: Fix typos in conditional compilation. Add debug output. Remove extra clear of pending interrupts, could cause missing interrupts. Add spirit_reg_modify() which is not currently used.
2017-08-03 09:55:30 -06:00
Gregory Nutt
8a785c4b66
Spirit Network Device: Fix a deadlock. Also several other design improvements to eliminate corner cases.
2017-08-03 08:37:05 -06:00
Gregory Nutt
d5e7ebed02
configs/stm32f746g-disco: Remove inclusion of STm32-specifiy header files from board.h
2017-08-02 17:34:29 -06:00
Ivan Ucherdzhiev
e0fd3a2d11
Fix for stm32f746g-disco board for button support with interrupt. This change is tested with buttons app example and it is working with interrupts (signals). I tried the test with polling but at this point it doesn't work.
2017-08-02 17:28:55 -06:00
Gregory Nutt
1029f06321
b-l475e-iot01a: crude update to +CONFIG_BOARD_LOOPSPERMSEC. Not precise.
2017-08-02 17:11:24 -06:00
