Mark Schulte
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
8ee2e8d8b0
Most Ethernet drviers: Check if the poll timer is running before restarting it at the end of each TX.
2017-02-24 15:58:17 -06:00
Gregory Nutt
1474300276
LPC43: Rename HAVE_CONSOLE to HAVE_SERIAL_CONSOLE. We can, of course, always have a some console other than a serial console.
2017-02-15 07:23:18 -06:00
Alan Carvalho de Assis
058f06cc94
Fix typos introduced in previous commit
2017-02-15 07:16:15 -06:00
Alan Carvalho de Assis
1b996f1c7c
Add usbnsh config to Bambino 200E board
2017-02-14 19:31:39 -06:00
Gregory Nutt
4043dd4aa0
LPC43 serial: Correct conditional logi that selects /dev/ttySN. Problem noted by Alan Carvalho de Assis.
2017-02-14 19:12:11 -06:00
Alan Carvalho de Assis
afa1066b4d
LPC43: Fix missing #endif
2017-02-08 11:52:15 -06:00
Gregory Nutt
62a1f6f110
up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list.
2017-02-07 10:35:04 -06:00
Alan Carvalho de Assis
25bf212ab4
LPC43 pinset definitions: Add more 1 bit to pinset to reach SFSCLK0-SFSCLK3
2017-01-26 13:31:29 -06:00
Alan Carvalho de Assis
cf2beeb1cf
LPC43: Remove PINCONFIG_DIGITAL
2017-01-26 13:26:55 -06:00
Gregory Nutt
4a8c6a6d2d
ELF: Move ARMv6-M, ARMv7-M, and legacy ARM versions of ELF relocation logic to libc/machine
2017-01-21 15:24:25 -06:00
Gregory Nutt
be5ba90d4f
Move optimized ARM memcpy functions from arch/arm/src/ to libc/machine/. This is necessary for the PROTECTED and KERNEL build modes. Otherwise, memcpy() will be built in to kernel space and not accessible to applications.
2017-01-20 10:53:46 -06:00
Gregory Nutt
3c4684ef5f
Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename.
2017-01-20 09:30:07 -06:00
Alan Carvalho de Assis
35023e4c6d
LPC43xx SD card: Correct pin configuration options needed for SD card pins.
2016-12-09 10:54:17 -06:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Alan Carvalho de Assis
cd119ad544
GPDMA driver for the LPC43xx. The GPDMA block is basically the same as the LPC17xx. Only the clock configuration is different and LPC43xx has four different DMA request sources, where LPC17xx has only two.
2016-12-01 18:01:04 -06:00
Alan Carvalho de Assis
8b3a6d1eca
LPC43 SD/MMC: Correct some git definitions on SMMC control register in lpc43_sdmmc.h
2016-11-30 14:50:32 -06:00
Gregory Nutt
934aded293
arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER
2016-11-29 16:06:48 -06:00
Alan Carvalho de Assis
7dbc25b02b
LPC43xx: Add timer driver; configs/bambino-200e: Add support for timer driver
2016-11-23 13:33:51 -06:00
Gregory Nutt
0804286ad3
arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS.
2016-11-19 09:20:01 -06:00
Gregory Nutt
b0dffdc2ca
Fix a number of header files with mismatched 'extern C {' and '}'
2016-11-05 07:25:05 -06:00
Gregory Nutt
d28181da10
arch: Disable priority inheritance on all semaphores used for signaling in all USB host drivers
2016-11-03 17:05:53 -06:00
Gregory Nutt
e1cd9febbf
arch: Disable priority inheritance on all semaphores used for signaling in all I2C/TWI drivers
2016-11-03 14:23:42 -06:00
Vytautas Lukenskas
5b1a3e6fe0
Restore RS485 mode on serial port open (if RS485 is enabled via menuconfig).
2016-10-28 09:10:11 -06:00
Vytautas Lukenskas
d9c2789253
LPC32xx serial: Fix a typo in ioctl TIOCSRS485 ioctl.
2016-10-27 07:00:32 -06:00
Vytautas Lukenskas
fd1de92016
There are some small problems in LPC43xx RS485 mode configuration. In particular: 1. UART0,2,3 do not have DTR pins (different from UART1), so, Kconfig needs to be adjusted. 2. lpc43_uart.c in RS485 mode only configures DIR pin, but doesn't enable pin output for UART0,2,3. 3. should be option to reverse DIR control pin output polarity. 4. lpc43xx/chip/lpc43_uart.h doesn't have USART3 definitions. NOTE: I didn't modified and didn't tested USART1, as it has different hardware. From Vytautas Lukenskas.
2016-09-30 08:51:49 -06:00
Gregory Nutt
4ebace37a9
Fix typos in LPC43 serial driver. Found by Vytautas Lukenskas
2016-08-24 10:34:56 -06:00
Gregory Nutt
d9314c1034
LPC43xx ADC: board.h should be included last; Also, unreleated, update tools/README.txt
2016-07-30 07:05:10 -06:00
Gregory Nutt
14de4b99f8
Simplify some computations
2016-07-23 08:13:25 -06:00
Gregory Nutt
369c942605
uint8_t is big enough for global. Range of values only 2-10
2016-07-21 15:18:27 -06:00
Gregory Nutt
67900beaaa
LP43 Heap: REALLY eliminate the warning this time
2016-07-21 15:15:56 -06:00
Gregory Nutt
0d98507af1
Eliminate a warning
2016-07-20 16:47:23 -06:00
Vytautas Lukenskas
ac2a5e079c
Add change missing in Make.defs for last LPC43xx change
2016-07-19 09:28:15 -06:00
Vytautas Lukenskas
f222d37aa7
Extend LPC43xx EMC code to support SDRAM on a dynamic memory interface.
2016-07-19 07:11:04 -06:00
Gregory Nutt
54bc6c88dd
Fix cast of return value
2016-07-14 10:21:31 -06:00
Gregory Nutt
3f6835fda9
If CONFIG_SPIFI_SECTOR512 undefined, lpc43_bwrite doesn't do actual write (probably copy/paste errors). Still not sure about current state of lpc43_spifi implementation, but for me NXFFS works with this patch. From Vytautas Lukenskas.
2016-07-14 10:11:19 -06:00
Paul A. Patience
a4d5845887
efm32, lcp43, stm32, stm32l4: disable interrupts with NVIC_IRQ_CLEAR
2016-06-28 15:12:39 -04:00
Alexander Vasiljev
315e22e4df
Correct auto-negotiation mode in the LPC43xx ethernet.
2016-06-24 10:09:36 -06:00
Gregory Nutt
2a751068e6
Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().
2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72
Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn().
2016-06-20 09:37:08 -06:00
Gregory Nutt
349748dd7e
LPC43xx: Convert *err() to either *info() or add ERROR:, depending on if an error is reported
2016-06-17 09:40:09 -06:00
Gregory Nutt
0d3ecb3ddd
Fix another victim of the mass name changes: xyz_errmonitor->xyz_dbgmonitor
2016-06-17 07:00:33 -06:00
Gregory Nutt
0c8c7fecf0
Add _ to the beginning of all debug macros to avoid name collisions
2016-06-16 12:33:32 -06:00
Gregory Nutt
ba03134bed
Centralize definitions associated with CONFIG_DEBUG_SPI
2016-06-15 10:41:13 -06:00
Gregory Nutt
c4e6f50eac
Centralize definitions associated with CONFIG_DEBUG_IRQ
2016-06-15 08:35:22 -06:00
Gregory Nutt
0f249016a0
Eliminate some warnings
2016-06-13 14:01:32 -06:00
Gregory Nutt
eac916c907
Fix some warnings
2016-06-13 11:48:20 -06:00
Gregory Nutt
b9aadf7242
configs/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-13 08:45:54 -06:00
Gregory Nutt
a1469a3e95
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
