Commit Graph

879 Commits

Author SHA1 Message Date
Gregory Nutt
8190041472 boards/mips: Leverage PR 1150 to MIPS make.defs. 2020-05-31 10:15:22 -03:00
Gregory Nutt
1414c55c45 boards/arm: Leverage PR 1150 to other ARM Make.defs 2020-05-30 20:09:02 +01:00
Gregory Nutt
5d540f45da boards/arm/stm32/stm32f4discovery/scripts/Make.defs: Pre-calculate include paths
This is a change suggested by Xiao Xiang in an email thread.  Some make variables with depend on forking and shell and running a script to get the value of the variable.  Using := we can force the calculation to occur only once.  This leads to a small but consistent improvement in build performance.

This change really applies to ALL Make.defs files but is applied only to one here so that it can be thoroughly verified and possbily leveraged to other Make.defs files in the future.
2020-05-30 17:17:23 +01:00
RB
f47151f8a7 Updated Rx65n rtc for non CONFIG_RTC_HIRES
Added support for non CONFIG_RTC_HIRES
2020-05-28 16:16:25 -06:00
liuhaitao
2aa1f5c765 Remove the copied locked.r file in clean stage
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-05-27 07:22:19 -06:00
YAMAMOTO Takashi
4f1258f727 sama5: Disable CONFIG_NETUTILS_NETLIB_GENERICURLPARSER for a config
There is no clear reason why this option is enabled here.

This is a preparation for
https://github.com/apache/incubator-nuttx-apps/pull/278
2020-05-26 10:37:48 +08:00
Nathan Hartman
8188171a1b b-g474e-dpow1: Apply recent build script changes
boards/arm/stm32/b-g474e-dpow1/scripts/Make.defs:

    * Apply the recent build script changes introduced in the
      following git commits:
      - 7e5b0f81e9 and
      - e83c1400b6
      to this board. Namely, factor the definitions of ARCHINCLUDES
      and ARCHXXINCLUDES out of CONFIG_CYGWIN_WINTOOL conditional,
      and use new build variable BOARD_DIR to simplify ARCHSCRIPT.
2020-05-25 12:35:03 -06:00
Xiang Xiao
8b20b97d26 build: Remove the dummy drivers folder under boards
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-24 20:20:12 +01:00
Xiang Xiao
e83c1400b6 build: Move BOARD_DIR definition to common place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-24 20:20:12 +01:00
Xiang Xiao
7e5b0f81e9 build: Replace -I with INCDIR
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-24 20:20:12 +01:00
Xiang Xiao
23668a4b9b build: Remove the empty variable assignment
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-24 08:24:13 -06:00
Xiang Xiao
1caf21b187 build: Remove the unused BOARD_INCLUDE variable
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-24 08:24:13 -06:00
Xiang Xiao
edb0ce2d5a build: Don't need use $(DELIM) in include statement
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-24 08:24:13 -06:00
Masayuki Ishikawa
2e9a1b0962 boards: lm3s6965-ek: Fix style violations in board.h 2020-05-24 08:21:32 -06:00
Masayuki Ishikawa
c9aa98d79b boards: lm3s6965-ek: Update discover/defconfig
- Enable CONFIG_DEBUG_HARDFAULT_ALERT
- Enable CONFIG_READLINE_CMD_HISTORY
- Enable CONFIG_SCHED_LPWORK with priority=60
2020-05-24 08:21:32 -06:00
Masayuki Ishikawa
563d94d969 boards: lm3s6965-ek: Fix SYSCLK_FREQUENCY for QEMU 2020-05-24 08:21:32 -06:00
Xiang Xiao
1f1dd43c6f b-g474e-dpow1: Run refresh.sh for nsh config
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-24 08:20:29 -06:00
Xiang Xiao
dd61d3d9f9 build: Remve the unnecessary .gitignore
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-23 18:00:40 +01:00
Nathan Hartman
bb10e0fc25 Add support for STM32G474: Add B-G474E-DPOW1 board
Add support for the STM32G474 family of microcontrollers and the
B-G474E-DPOW1 Discovery Board, which features a STM32G474RET6.

This is a major pull request as it adds support for an entirely
new family of STM32. This support is implemented in
arch/arm/src/stm32 and shares implementation with other STM32
families supported by that code, such as the 'L15xx, 'F10xx,
'F20xx, 'F3xxx, and 'F4xxx.

boards/Kconfig:

    * Make NuttX recognize the existence of b-g474e-dpow1,
      the B-G474E-DPOW1 Discovery Board.

boards/arm/stm32/b-g474e-dpow1/Kconfig:
boards/arm/stm32/b-g474e-dpow1/README.txt:
boards/arm/stm32/b-g474e-dpow1/configs/nsh/defconfig:
boards/arm/stm32/b-g474e-dpow1/include/board.h:
boards/arm/stm32/b-g474e-dpow1/scripts/Make.defs:
boards/arm/stm32/b-g474e-dpow1/scripts/ld.script:
boards/arm/stm32/b-g474e-dpow1/src/.gitignore:
boards/arm/stm32/b-g474e-dpow1/src/Make.defs:
boards/arm/stm32/b-g474e-dpow1/src/b-g474e-dpow1.h:
boards/arm/stm32/b-g474e-dpow1/src/stm32_appinit.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_autoleds.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_boot.c:
boards/arm/stm32/b-g474e-dpow1/src/stm32_userleds.c:

    * Add minimal support for the B-G474E-DPOW1 Discovery
      Board. The board boots successfully through to the
      NSH prompt. NSH runs and is responsive.

With big thanks for detailed code review and suggestions:
    David Sidrane (davids5)
    Mateusz Szafoni (raiden00)
    Abdelatif Guettouche (Ouss4)
2020-05-23 09:02:00 -03:00
Masayuki Ishikawa
287b9f9c38 drivers: wireless: Add WPA2-PSK in AP mode for gs2200m
NOTE: By default, WPA2-PSK is used instead of WEP

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>>
2020-05-22 10:20:07 +02:00
Masayuki Ishikawa
76e216981e boards: spresense: Increase CONFIG_CXD56_AUDIO_NUM_BUFFERS for streaming
NOTE: http audio streaming is more stable now

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-21 12:46:10 +02:00
Xiang Xiao
1a95cce1a3 build: Move .config check to the top Makefile
remove the workaround to handle the inexistence of .config/Make.defs

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-20 17:57:34 +01:00
Masayuki Ishikawa
3fdbff3638 boards: spresense: Add nxplayer to rndis and wifi configs
NOTE: currently audio driver supports fs=48kHz only

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-20 10:09:58 +02:00
Masayuki Ishikawa
28a0efb075 boards: imxrt1060-evk: Update netnsh/defconfig
- Fix CONFIG_LIB_HOSTNAME entry
- Enable dns client and add renew command
- Enable command line history

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-20 11:20:11 +08:00
liuhaitao
a3b643fdc1 olimex-stm32-p407: update HAVE_MODSYMS judge for protected build
Fix build break as below:
arm-none-eabi-ld: stm32_bringup.c:(.text+0x50): undefined reference to `g_mod_exports'

Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-05-19 19:23:54 +01:00
Xiang Xiao
7faf3c0254 build: replace ${TOPDIR} with $(TOPDIR) in Makefile
make the usage consistence

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-19 19:23:18 +01:00
Xiang Xiao
567962bd62 build: Move the extension definition to common place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-19 19:23:18 +01:00
Xiang Xiao
8b42ee421a build: Move MKDEP definition to common place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-19 19:23:18 +01:00
Xiang Xiao
9ec9431706 build: Move DIRLINK/DIRUNLINK definition to common place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-19 19:23:18 +01:00
Masayuki Ishikawa
3387da6316 boards: spresense: Add ftpc to wifi/defconfig
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-19 07:02:33 +02:00
Masayuki Ishikawa
bb39907b9c boards: spresense: Add ftpc and ftpd to rndis/defconfig
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-19 07:02:33 +02:00
Masayuki Ishikawa
d5c45fbd49 boards: lm3s6965-ek: Update discover/defconfig
- Remove old toolchain and buildroot support
- Enable builtin and add hello and renew commands
- Enable procfs and change name size to 24
- Enable stack coloration

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>>
2020-05-18 19:59:35 -06:00
Xiang Xiao
5eae32577e build: Move INCDIROPT to common place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-18 15:02:55 -06:00
Xiang Xiao
bd656888f2 build: Replace WINTOOL with CYGWIN_WINTOOL Kconfig
so the correct value can be determinated by Kconfig system automatically

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-18 15:02:55 -06:00
Gregory Nutt
a569006fd8 sched/: Make more naming consistent
Rename various functions per the quidelines of https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions

    nxsem_setprotocol -> nxsem_set_protocol
    nxsem_getprotocol -> nxsem_get_protocol
    nxsem_getvalue -> nxsem_get_value
2020-05-17 14:01:00 -03:00
Pierre-Olivier Vauboin
671191d7a1 boards/arm/stm32h7/stm32h747i-disco: fix nxstyle warnings 2020-05-15 23:11:33 +01:00
Pierre-Olivier Vauboin
4585af393c boards/arm/stm32h7/stm32h747i-disco: change the license header of all new files to an Apache 2.0 license. 2020-05-15 23:11:33 +01:00
Pierre-Olivier Vauboin
2d43c57a67 boards/arm/stm32h7/stm32h747i-disco: SDMMC card detect interrupt 2020-05-15 23:11:33 +01:00
Pierre-Olivier Vauboin
583d81e3de boards/arm/stm32h7/stm32h747i-disco: bring FAT DMA allocator
Buffers are allocated in the main ram, which is suitable for use with the
underlying STM32H7 SDMMC1 core in IDMA mode.

Files are copied from stm32f7/nucleo-144.
2020-05-15 23:11:33 +01:00
Pierre-Olivier Vauboin
369293dd84 boards/arm/stm32h7/stm32h747i-disco: bring support for SDMMC 2020-05-15 23:11:33 +01:00
Nathan Hartman
8d985819b3 Fix typos
Comments only. No functional changes.
2020-05-14 10:49:44 -06:00
Masayuki Ishikawa
0bd5dda2a3 boards: spresense: Remove CONFIG_EXAMPLES_FTPC=y to avoid compile error on CI
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>>
2020-05-14 14:17:47 +02:00
Masayuki Ishikawa
d2de9238a4 boards: spresense: Add support ftpc and ftpd to wifi/defconfig
NOTE: lpwork's priority has been changed from 30 to 60 to avoid an
error when calling getsockname() just after connect() in ftpc.c

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-14 14:17:47 +02:00
Matias Nitsche
c86258c9a0 stm32 nunchuck: small fixes 2020-05-14 08:32:48 +02:00
Matias Nitsche
e0d21275df fix all remaining nxstyle errors 2020-05-14 08:32:48 +02:00
Matias Nitsche
2d8a534ef5 nxstyle 2020-05-14 08:32:48 +02:00
Matias Nitsche
5fd9bd5837 stm32: moved all remaining sensor initialization to common board logic 2020-05-14 08:32:48 +02:00
Matias Nitsche
05e005c58e stm32: move ina219 initialization to common board logic directory 2020-05-14 08:32:48 +02:00
Matias Nitsche
60d51f2907 nxstyle fixes 2020-05-14 08:32:48 +02:00
Matias Nitsche
4fdf2520e6 stm32: move qencoder initialization to common board logic 2020-05-14 08:32:48 +02:00
Matias Nitsche
856c3e4263 nxstyle fixes 2020-05-14 08:32:48 +02:00
Matias Nitsche
cf1ff36e0e stm32: move zerocross sensor initialization to common board logic 2020-05-14 08:32:48 +02:00
Matias Nitsche
562210a9bd stm32: move APDS9960 initialization to common board logic 2020-05-14 08:32:48 +02:00
Matias Nitsche
beba7a8f0b stm32: move HCSR04 initialization to common board logic 2020-05-14 08:32:48 +02:00
Matias Nitsche
382ccf7b79 nxstyle fixes 2020-05-14 08:32:48 +02:00
Matias Nitsche
126be360fa stm32: fix NRF24L01 initialization for stm32_tiny 2020-05-14 08:32:48 +02:00
Matias Nitsche
c442725f23 nxstyle fix 2020-05-14 08:32:48 +02:00
Matias Nitsche
6ca46520df stm32: migrate all boards to common logic system (Makefile -> Make.defs) 2020-05-14 08:32:48 +02:00
Matias Nitsche
64987db9e1 stm32: use macros from board.h to pass configuration to common board logic, not structs 2020-05-14 08:32:48 +02:00
Matias Nitsche
944ed5ae0a stm32: move NRF24L01 support into common board logic 2020-05-14 08:32:48 +02:00
Matias Nitsche
7c7836d1d7 stm32: move lm75 handling into common board logic; delete unused lm75 file for stm3210e-eval 2020-05-14 08:32:48 +02:00
Matias Nitsche
35471e33dc stm32: move ssd1306 and tone driver handling to common board logic 2020-05-14 08:32:48 +02:00
Matias Nitsche
717fa46a53 stm32: move nunchuck driver to common board logic 2020-05-14 08:32:48 +02:00
Matias Nitsche
d444df59af stm32: move APA102, VEML6070 and MAX6675 initialization to board common logic 2020-05-14 08:32:48 +02:00
Matias Nitsche
cf8206a0cb nxstyle fixes 2020-05-14 08:32:48 +02:00
Matias Nitsche
edafeccc9f stm32: make BMP180 initialization part of stm32 board-common logic 2020-05-14 08:32:48 +02:00
Gregory Nutt
801b9d6e5f arch/arm: Remove support for old redundant toolchains.
Remove support for the Codesourcery, Atollic, DevKitArm, Raisonance, and CodeRed toolchains.  Not only are these tools old and no longer used but they are all equivalent to standard ARM EABI toolchains.  Retaining specific support has no effect (they are still supported, but now just as generic EABI toolchains).
2020-05-13 18:41:10 +01:00
rajeshwaribhat
3d7678ad9b nxstyle corrections for .c and .h file modified by PR1030 2020-05-13 06:46:56 -06:00
Gregory Nutt
4664642cf7 Board specific code moved to boards directory and ipv6 support added
Added support to crashdump for rx65n on sbram
Board specific code moved to boards directory and ipv6 support added
2020-05-13 06:46:44 -06:00
Xiang Xiao
7ffafa3654 Remove executable bit from source code
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-13 06:32:13 -06:00
Masayuki Ishikawa
65b3accc51 boards: cxd56xx: Add SPI DMA support to cxd56_gs2200m.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-13 13:11:08 +02:00
liuhaitao
21557ac259 ea3131/scripts/pg-ld.script: Rename up_head.o to arm_head.o
In https://github.com/apache/incubator-nuttx/pull/935, up_head.S renamed
to arm_head.S, so update here accordingly.

Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-05-13 10:39:29 +02:00
Masayuki Ishikawa
1d77061adc boards: maix-bit: Update knsh/defconfig 2020-05-13 03:34:04 +01:00
Nakamura, Yuuichi
f60b79f772 Add defconfig for maix-bit:knsh 2020-05-12 20:19:24 +09:00
Xiang Xiao
92c721a532 boards: Fix the wrong order in some defconfig
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-11 12:24:58 -06:00
Gregory Nutt
153eee6de2 Make more OS internal names consistent
1. Internal scheduler functions should begin with nxsched_, not sched_
2. Follow the consistent naming patter of https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions

    # clock_systimer -> clock_systime_tick
    # clock_systimespec -> clock_systime_timespec
    sched_oneshot_extclk -> nxsched_oneshot_extclk
    sched_period_extclk -> nxsched_period_extclk
    # nxsem_setprotocol -> nxsem_set_protocol
    # nxsem_getprotocol -> nxsem_get_protocol
    # nxsem_getvalue -> nxsem_get_value
    nxsem_initholders -> nxsem_initialize_holders
    nxsem_addholder -> nxsem_add_holder
    nxsem_addholder_tcb -> nxsem_add_holder_tcb
    nxsem_boostpriority -> nxsem_boost_priority
    nxsem_releaseholder -> nxsem_release_holder
    nxsem_restorebaseprio -> nxsem_restore_baseprio

Some planned name changed were skipped for now because they effect too many files (and would require many hours of coding style fixups).
2020-05-10 22:47:07 +08:00
Gregory Nutt
4b44b628ea Run nxstyle against all .c and .h files modified by this PR.
All complaints fixed except for those that were not possible to fix:

- Used of Mixed case identifier in ESP32 files.  These are references to Expressif ROM functions which are outside of the scope of NuttX.
2020-05-09 14:19:08 -03:00
Gregory Nutt
a4218e2144 include/nuttx/sched.h: Make naming of all internal names consistent:
1. Add internal scheduler functions should begin with nxsched_, not sched_
2. Follow the consistent naming patter of https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions
2020-05-09 14:19:08 -03:00
chao.an
027ffa1530 boards: update the defconfig
reuse the router ip/mask from dhcpd lib

CONFIG_EXAMPLES_DHCPD_IPADDR   -> CONFIG_NETUTILS_DHCPD_ROUTERIP
CONFIG_EXAMPLES_DHCPD_DRIPADDR -> CONFIG_NETUTILS_DHCPD_ROUTERIP
CONFIG_EXAMPLES_DHCPD_NETMASK  -> CONFIG_NETUTILS_DHCPD_NETMASK

Signed-off-by: chao.an <anchao@xiaomi.com>
2020-05-09 07:24:27 -06:00
Gregory Nutt
4301682fbc Fix up some problems/issues remaining from PR 1007
1. Add missing conditional logic in include/sys/syscall_lookup.h
2. CONFIG_NPTHREAD_KEYS removed from code but was still in sched/Kconfig
3. Refresh all configurations affected by PR 1007
4. syscall/syscall_funclookup.c needs to include nuttx/tls.h
2020-05-08 20:13:40 +01:00
Gregory Nutt
9ce03b1660 Move pthread-specific data into TLS
1. Move pthread-specific data files from sched/pthread/ to libs/libc/pthread.
2. Remove pthread-specific data functions from syscalls.
3. Implement tls_alloc() and tls_free() with system calls.
4. Reimplement pthread_key_create() and pthread_key_free() using tls_alloc() and tls_free().
5. Reimplement pthread_set_specific() and pthread_get_specicif() using tls_set_value() and tls_get_value()
2020-05-08 18:05:04 +01:00
Tobias Johansson
f2c957144a cxd56: Add input support to Spresense audio driver
Add recording support to the Nuttx audio driver for Spresense.
- Supports 16 bit data with 48 kHz sample rate only for now.
- Supports 1 (dual mono) 2 or 4 channels.
- Only analog mics have been tested so digital is considered
  unsupported.
2020-05-08 07:18:22 -06:00
Gregory Nutt
f801d049b0 boards/Board.mk: Fix MSYS build problem w/ ZDS-II Toolchain
POSIX style paths must always be converted to Windows style paths when
using the ZDS-II Toolchain with Cygwin or MSYS
2020-05-08 04:37:41 +01:00
Pierre-Olivier Vauboin
608e0920d4 boards/arm/stm32h7/stm32h747i-disco: fix style issues 2020-05-07 10:29:01 -06:00
Pierre-Olivier Vauboin
8d8ceee838 boards/arm/stm32h7/stm32h747i-disco: support for FMC SDRAM 2020-05-07 10:29:01 -06:00
Yang Chung-Fan
c63c8a3841 arch: x86_64: Add real-mode bootstrap stub 2020-05-06 08:35:09 -07:00
Xiang Xiao
7fa20cf40e board/sim: Change CONFIG_SYSTEM_USRSOCK_RPMSG to CONFIG_NETUTILS_USRSOCK_RPMSG
follow up the apps side change

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 08:59:07 -06:00
Masayuki Ishikawa
ca8f0aa87e boards: maix-bit: Add descriptions on how to write nuttx.bin to SPI-Flash 2020-05-05 17:21:32 -07:00
Pierre-Olivier Vauboin
1ef0fe36c4 stm32f103-minimum/src/stm32_tone: fix style issues 2020-05-05 10:30:44 -06:00
Pierre-Olivier Vauboin
c11325d061 stm32f103-minimum/src/stm32_tone: remove unnecessary call to tone start()
The "info" structure was used non initialized and causing bad sounds at
boot. The start() function is anyway called later on when actually playing
sounds.
2020-05-05 10:30:44 -06:00
Xiang Xiao
d9d2fc0d0a debug: Reduce CONFIG_CPP_HAVE_VARARGS usage
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-05 08:27:58 -06:00
YAMAMOTO Takashi
19cc84ed4a sim: Suppress no symbol warnings for macOS 2020-05-05 21:40:16 +08:00
YAMAMOTO Takashi
1195228109 Revert "sim: Suppress "has no symbols" warnings for macOS"
This reverts commit c1beda50f8.

IMO, it's too ugly hack just to surpress warnings.
2020-05-05 21:40:16 +08:00
Brennan Ashton
a9871f584a Resolve linking issues with x86_64 port
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2020-05-04 08:32:22 -06:00
Masayuki Ishikawa
d3851699d7 boards: qemu-i486: Mount procfs in board_app_initialize() 2020-05-04 07:13:30 -06:00
Masayuki Ishikawa
f6c6fea4a5 boards: qemu-i486: Enable procfs and builtin apps (hello/ostest) in nsh/defconfig 2020-05-04 07:13:30 -06:00
Masayuki Ishikawa
cd8492b612 boards: qemu-i486: Fix CONFIG_16550_UART0_IRQ number to handle console input 2020-05-04 07:13:30 -06:00
raiden00pl
31607f7627 fix nxstyle issues 2020-05-03 15:57:49 -03:00
raiden00pl
7b0ee05c49 boards/arm/stm32: fix board configurations according to changes in previous commit 2020-05-03 15:57:49 -03:00
Brennan Ashton
d4bf61c523 x86_64: Set kernel entry to 1M to avoid EPT Violation
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2020-05-03 12:16:38 -06:00
Xiang Xiao
a2f6dc9b7c errno: Rename get_errno_ptr to __errno
Inrease the compatiblity with the third party library(e.g. newlib)

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-03 12:15:54 -06:00
Brennan Ashton
6204e10e2e x86_64: Add nsh configuration with procfs bringup
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2020-05-03 07:49:52 -06:00
Alan Carvalho de Assis
54d0256b9a Remove the not existent CONFIG_XXX_CMNVECTOR 2020-05-02 09:55:35 -06:00
Gregory Nutt
673640b313 Run all .c and .h modified by this PR through nxstyle
The are remaining nxstyle complaints due to the use of mixed case identifiers in arch/arm/src/lc823450/lc823450_irq.c This, cannot be easily fixed since it depends on register definitions in header files that have implications to section other lc823450 files.
2020-05-01 16:55:33 -03:00
Gregory Nutt
b0dbdd7c10 arch/arm, board/arm: Rename all up_ramvec_* functions to arm_ramvec_*
Summary

The naming standard at https://cwiki.apache.org/confluence/display/NUTTX/Naming+FAQ requires that all MCU-private functions begin with the name of the architecture, not up_.

This PR addresses only these name changes for the ARM-private functions up_ramvec_initialize() and up_ramvec_attch().

Impact

There should be no impact of this change (other that one step toward more consistent naming).

Testing

stm32f4discovery:netnsh
2020-05-01 16:55:33 -03:00
Gregory Nutt
2aa85fd17e arch/arm, board/arm: Rename all up_* functions to arm_*
Summary

The naming standard at https://cwiki.apache.org/confluence/display/NUTTX/Naming+FAQ requires that all MCU-private functions begin with the name of the architecture, not up_.

This PR addresses only these name changes for the ARM-private functions prototyped in arm_internal.h

This change to the files only modifies the name of called functions.  nxstyle fixes were made for all core architecture files.  However, there are well over 5000 additional complaints from MCU drivers and board logic that are unrelated to to this change but were affected by the name change.  It is not humanly possible to fix all of these.   I ask that this change be treated like other cosmetic changes that we have done which do not require full nxstyle compliance.

Impact

There should be not impact of this change (other that one step toward more consistent naming).
Testing

stm32f4discovery:netnsh
2020-05-01 18:28:13 +01:00
Xiang Xiao
c1beda50f8 sim: Suppress "has no symbols" warnings for macOS
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-01 10:48:17 -06:00
Gregory Nutt
037c9ea0a4 arch/arm: Rename all up_*.h files to arm_*.h
Summary

The naming standard at https://cwiki.apache.org/confluence/display/NUTTX/Naming+FAQ requires that all MCU-private files begin with the name of the architecture, not up_.

This PR addresses only these name changes for the up_*.h files.  There are only three, but almost 1680 files that include them:

    up_arch.h
    up_internal.h
    up_vfork.h

The only change to the files is from including up_arch.h to arm_arch.h (for example).

The entire job required to be compatible with that Naming Convention will also require changing the naming of the up_() functions that are used only within arch/arm and board/arm.

Impact

There should be not impact of this change (other that one step toward more consistent naming).

Testing

stm32f4discovery:netnsh
2020-05-01 03:43:44 +01:00
Gregory Nutt
a86884c615 Run all .c and .h files modifed in this PR through nxstyle. 2020-04-30 22:09:51 +01:00
Gregory Nutt
6398a64e26 Rename up_saveusercontext to arm_saveusercontext 2020-04-30 22:09:51 +01:00
Gregory Nutt
317a8a8942 arch/z16: Build update
Verfy build.  Update to latest 2.2.2 toolchain.
2020-04-30 16:58:06 +01:00
Masayuki Ishikawa
e479a97aec boards: spresense: Enable tcpblaster and udpblaster for wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-04-30 09:09:17 +02:00
Masayuki Ishikawa
1e47d60032 boards: spresense: Improve memcpy/memset performance for wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-04-30 09:09:17 +02:00
Gregory Nutt
1aa9ff8af2 Run .c and .h files in this PR through nxstyle and fix complaints 2020-04-29 22:30:54 -03:00
Gregory Nutt
f23a756349 arch/z16: Correct file naming for coding standard
Rename all up_* files to conform to the name conventions of https://cwiki.apache.org/confluence/display/NUTTX/Naming+FAQ

Rename all internal functions from up_* z16_
2020-04-29 22:30:54 -03:00
Xiang Xiao
5d12735f34 sama5d3x-ek/nxwm: Fix error: 'g_adcdev' undeclared
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-29 14:04:14 -06:00
Xiang Xiao
1692c90d15 Revert "sama5d3x-ek/nxwm: Fix error: 'g_adcdev' undeclared"
This reverts commit ab2e24b42b.
2020-04-29 14:04:14 -06:00
Xiang Xiao
36108d814e lpc31xx/ea3131: Fix error: libboard.a can't find
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-29 10:26:29 -06:00
Xiang Xiao
c82b446fa9 Fix nxstyle issue
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-29 07:10:44 -06:00
Xiang Xiao
304ecb2552 mikroe-stm32f4/fulldemo: Fix undefined reference to `stm32_spi2register'
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-29 07:10:44 -06:00
Xiang Xiao
ab2e24b42b sama5d3x-ek/nxwm: Fix error: 'g_adcdev' undeclared
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-29 07:10:44 -06:00
Xiang Xiao
ed2b56799a stm32/mikroe-stm32f4: Fix the several macros undefine issue
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-29 07:10:44 -06:00
Xiang Xiao
01ad7a82a3 stm32/mikroe-stm32f4: Fix nsh_romfsimg.h can't find
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-29 07:10:44 -06:00
Xiang Xiao
e006054dfc lpc31xx/ea3131: Fix ld-locked.inc can't find
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-29 07:10:44 -06:00
Xiang Xiao
ea58adb371 esp32-core/Make.defs: Remove "-MMD -MP" from ARCHCFLAGS
since this should be done by makedep program

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-28 21:28:15 -07:00
Xiang Xiao
7ffccf738c Makefile: Remove KERNEL variable which isn't really used
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-28 09:01:58 -06:00
Ouss4
32597a763a arch/mips: Fix file naming. 2020-04-26 20:56:30 -06:00
Gregory Nutt
dcd50db5d1 Run files in previous commit through nxstyle, fixing issues. 2020-04-26 22:14:25 +01:00
Gregory Nutt
a0fdda698c arch/z80: Fix z80 file naming
Modify file naming to conform on the Naming conventions of https://cwiki.apache.org/confluence/display/NUTTX/Naming+FAQ

This commit only address the file naming convention.  There is still nonconformant function naming.
2020-04-26 22:14:25 +01:00
raiden00pl
b2c7f1ecfa boards/arm/stm32/stm32f429i-disco/src/stm32_highpri.c: fix nxstyle issues 2020-04-26 11:35:11 -06:00
raiden00pl
a91600050b boards/arm/stm32/stm32f334-disco/src/stm32_smps.c fix nxstyle issues 2020-04-26 11:35:11 -06:00
raiden00pl
7cdd9b1221 boards/arm/stm32/nucleo-f334r8/src/stm32_highpri.c: fix nxstyle issues 2020-04-26 11:35:11 -06:00
raiden00pl
6b7b18e835 boards/arm/stm32/nucleo-f302r8/src/stm32_highpri.c: fix nxstyle issues 2020-04-26 11:35:11 -06:00
raiden00pl
f837bfecdb arch/arm/src/stm32/stm32_adc.h: add prefix STM32 to low-level ops macros 2020-04-26 11:35:11 -06:00
Nathan Hartman
d6f7821b15 Docs and comments: Change OSX -> macOS
Mac OS X was renamed to macOS at some point. Update references to
OSX, OS X, Mac OS X, Mac OSX, and other permutations, to macOS,
in README files and in comments of other files.
2020-04-26 07:48:33 -06:00
Gregory Nutt
ee3ad39026 Remove improper uImage file
Remove boards/arm/sama5/sama5d3-xplained/boot/uImage that can in inadvertantly with a PR merge.

Also, change "/uImage" to just "uImage" in the top-level .gitignore file so that all occurences of uImage will be ignored, not just versions in the nuttx/ top-level directory.
2020-04-24 17:32:48 +01:00
rajeshwaribhat
31332904dd Added support to crashdump for rx65n on sbram 2020-04-22 07:32:37 -06:00
Masayuki Ishikawa
40eb87d8b4 boards: maix-bit: Update instructions for kostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-04-22 13:45:56 +08:00
Xiang Xiao
f706f5e0e8 boards/imxrt1060-evk: Generate nuttx.map in the root directory
to avoid the follow warning:
  Normalize imxrt1060-evk/nshocram
HEAD detached at pull/831/merge
Untracked files:
  (use "git add <file>..." to include in what will be committed)

	arch/arm/src/nuttx.map

nothing added to commit but untracked files present (use "git add" to track)

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-20 07:07:32 -06:00
Xiang Xiao
2810220ea9 Update defconfig per refresh.sh report
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-20 07:07:32 -06:00
Xiang Xiao
f2d4e1e2b7 Follow up change in apps "nshlib: Rename sh to source"
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-19 08:07:54 -06:00
Xiang Xiao
2ec8f60e53 Run refresh.sh --silent all
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-18 07:17:38 -06:00
Xiang Xiao
3c4be8710c Fix typo in boards/arm/cxd56xx/drivers/camera/Make.defs
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-18 07:17:38 -06:00
Xiang Xiao
6ad91aeb05 Kconfig: change the stack size default to DEFAULT_TASK_STACKSIZE
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-18 07:17:38 -06:00
YAMAMOTO Takashi
0e9b0d7603 sim: Don't generate romfs image if CONFIG_NSH_CUSTOMROMFS=y 2020-04-18 19:32:08 +08:00
YAMAMOTO Takashi
15d328c3ab sim: Fix config check for romfs image generation 2020-04-18 19:32:08 +08:00
Alin Jerpelea
e899bc92d2 boards: cxd56: nxstyle fixes for the common code
nxstyle fixes on the cxd56 common code

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-17 09:25:56 -06:00
Alin Jerpelea
efbd6ada21 boards: cxd56: spresense: nxstyle fixes
nxstyle fixes for the Sony Spresense board

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-17 09:25:56 -06:00
Alin Jerpelea
f2a6d88c9d boards: cxd56: drivers: sensors: nxstyle fix
Nxstyle fix for the sensors drivers

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-17 09:25:56 -06:00
Alin Jerpelea
b4cab7eb9e boards: cxd56: drivers: camera: nxstyle fix
Nxstyle fix for the camera driver

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-17 09:25:56 -06:00
chao.an
43989ee36f sim/nsh2: fix nxserver stack overflow
increase nxserver stack size to 4K

Signed-off-by: chao.an <anchao@xiaomi.com>
2020-04-17 09:24:49 -06:00
chao.an
3776bf6850 sim/configs: update the defconfig
Signed-off-by: chao.an <anchao@xiaomi.com>
2020-04-17 09:24:49 -06:00
chao.an
3dd094520c sim/nsh2: remove the specific Make.defs
Change-Id: If9204619c343993cecbf92c1b8d64a48480110e8
Signed-off-by: chao.an <anchao@xiaomi.com>
2020-04-17 09:24:49 -06:00
chao.an
c758cb8341 sim/romfs: add etctmp into ignore list
Signed-off-by: chao.an <anchao@xiaomi.com>
Change-Id: I8d6828882a7a52cb7ec61af8f288c1910167cd0b
2020-04-17 09:24:49 -06:00
Ouss4
674ca92485 spresnese/audio_sdk: Add CONFIG_AUDIO to have a warning free build. 2020-04-16 19:10:45 -06:00
YAMAMOTO Takashi
366c446003 sim: Provide MODULESTRIP for macOS 2020-04-16 16:04:11 -06:00
YAMAMOTO Takashi
c61d959655 sim: macOS's strip doesn't have --strip-unneeded option 2020-04-16 16:04:11 -06:00
chao.an
0668a1552d sim/nsh: dynamic rcS/rcRAW generation support
1. RCSRCS: Remove the fixed array definition and preprocessing
   dynamic configuration makes the RC script more flexible.

2. RCRAWS: Add preinstalled file support.

Change-Id: Id7c1640962b12101fb85013bc2cfbd60ee08cd2f
Signed-off-by: chao.an <anchao@xiaomi.com>
2020-04-16 13:20:56 -06:00
Xiang Xiao
c0c24d29df boards/Board.mk: use genromfs to make romfs image
Change-Id: I77e8af6daf57f3b71abdc918ec7159520cae00bd
Signed-off-by: chao.an <anchao@xiaomi.com>
2020-04-16 13:20:56 -06:00
Alin Jerpelea
7396c2d47a boards: arm: cxd56: drivers: audio: nxstyle fixes
nxstyle fixes for cxd56 audio driver

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-16 12:50:05 -06:00
Tobias Johansson
5fb835b1df boards: cxd56: enable Nuttx audio driver
Adds an initial Nuttx audio driver supporting the Spresense CXD56.
Being a work in progress the driver has a number of limitations:
- Audio playback only, no recording yet.
- Only 16 bit stereo playback is supported.
- In practice only 48kHz playback is supported due to missing SRC.
2020-04-16 12:50:05 -06:00
Alin Jerpelea
50431e6694 boards: cxd56: spresense: add configuration for the NuttX audio driver driver
This configuration uses the NuttX audio driver

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-16 12:50:05 -06:00
Alin Jerpelea
c35fd3bb25 boards: cxd56: spresense: add configuration for SDK audio driver
This configuration uses the driver audio from SDK

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-16 12:50:05 -06:00
Alin Jerpelea
502d7bb501 boards: cxd56: spresense: move audio configuration
The audio configuration is board specific and shared by both audio drivers.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-16 12:50:05 -06:00
Nathan Hartman
3c829226f9 Fix typos and nxstyle complaints.
arch/x86_64/src/intel64/intel64_tickless.c:
boards/x86_64/intel64/qemu-intel64/src/qemu_freq.c:
drivers/modem/altair/altmdm.c:

    * Fix typos and nxstyle complaints.
2020-04-15 17:04:58 +01:00
Xiang Xiao
df57cacd61 nuttx: Fix the nightly build warning again
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-14 11:22:22 +02:00
liuhaitao
4c7274c2a4 esp32: Remove the unecessary PREPROCESS call to fix build warning
xtensa-esp32-elf-gcc: warning: /home/jenkins/jenkins-slave/workspace/NuttX-Nightly-Build/nuttx/boards/xtensa/esp32/esp32-core/scripts/esp32.template: linker input file unused because linking not done.

Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-04-14 15:20:52 +08:00
Xiang Xiao
d3c4879113 Fix nxstyle warning
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-13 12:01:39 -06:00
Xiang Xiao
b22e3b9e28 nuttx: Fix the nightly build warning
lpc2148_spi1.c:142:24: warning: initialization of 'uint32_t (*)(struct spi_dev_s *, uint32_t)' {aka 'unsigned int (*)(struct spi_dev_s *, unsigned int)'} from incompatible pointer type 'uint16_t (*)(struct spi_dev_s *, uint16_t)' {aka 'short unsigned int (*)(struct spi_dev_s *, short unsigned int)'} [-Wincompatible-pointer-types]
  142 |   .send              = spi_send,
      |                        ^~~~~~~~
lpc2148_spi1.c:142:24: note: (near initialization for 'g_spiops.send')

In file included from ieee802154/mac802154_bind.c:49:
ieee802154/mac802154_internal.h: In function 'mac802154_setdevmode':
ieee802154/mac802154_internal.h:788:42: warning: converting a packed 'enum ieee802154_devmode_e' pointer (alignment 1) to a 'const union ieee802154_attr_u' pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  788 |                         (FAR const union ieee802154_attr_u *)&mode);
      |                                          ^~~~~~~~~~~~~~~~~

chip/stm32_hciuart.c: In function 'hciuart_read':
chip/stm32_hciuart.c:2104:30: warning: statement with no effect [-Wunused-value]
 2104 |                       ntotal == (ssize_t)ret;
      |                       ~~~~~~~^~~~~~~~~~~~~~~

wireless/ieee80211/bcm43xxx/bcmf_driver.c: In function 'bcmf_wl_auth_event_handler':
wireless/ieee80211/bcm43xxx/bcmf_driver.c:579:23: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  579 |   type = bcmf_getle32(&event->type);
      |                       ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c:580:25: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  580 |   status = bcmf_getle32(&event->status);
      |                         ^~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c: In function 'bcmf_wl_scan_event_handler':
wireless/ieee80211/bcm43xxx/bcmf_driver.c:619:25: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  619 |   status = bcmf_getle32(&event->status);
      |                         ^~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c:620:35: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  620 |   escan_result_len = bcmf_getle32(&event->len);
      |                                   ^~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_bdc.c: In function 'bcmf_bdc_process_event_frame':
wireless/ieee80211/bcm43xxx/bcmf_bdc.c:166:27: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  166 |   event_id = bcmf_getle32(&event_msg->event.type);
      |                           ^~~~~~~~~~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c: In function 'sdio_io_rw_direct':
wireless/ieee80211/bcm43xxx/mmc_sdio.c:157:3: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  157 |   ret = SDIO_RECVR5(dev, SD_ACMD52, (uint32_t *)&resp);
      |   ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c: In function 'sdio_io_rw_extended':
wireless/ieee80211/bcm43xxx/mmc_sdio.c:239:11: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  239 |           ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
      |           ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:244:11: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  244 |           ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
      |           ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:257:7: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  257 |       ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
      |       ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:265:3: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  265 |   SDIO_RECVR1(dev, SD_ACMD52ABRT, (uint32_t *)&resp);
      |   ^~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~

chip/stm32_adc.c: In function 'adc_reset':
chip/stm32_adc.c:2860:7: warning: unused variable 'ret' [-Wunused-variable]
 2860 |   int ret;
      |       ^~~
chip/stm32_adc.c: In function 'adc_shutdown':
chip/stm32_adc.c:3044:7: warning: unused variable 'ret' [-Wunused-variable]
 3044 |   int ret;
      |       ^~~

chip/stm32_i2c.c:722:12: warning: 'stm32_i2c_sem_wait_noncancelable' defined but not used [-Wunused-function]
  722 | static int stm32_i2c_sem_wait_noncancelable(FAR struct i2c_master_s *dev)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

wireless/gs2200m.c: In function 'gs2200m_read':
wireless/gs2200m.c:727:20: warning: passing argument 1 of 'nxsem_wait' from incompatible pointer type [-Wincompatible-pointer-types]
  727 |   ret = nxsem_wait(dev);
      |                    ^~~
      |                    |
      |                    struct gs2200m_dev_s *

.config:1207:warning: symbol value '' invalid for TESTING_OSTEST_FPUSIZE

platform/audio/cxd56_audio_analog.c:69:13: warning: inline function 'cxd56_audio_clock_is_enabled' declared but never defined
   69 | inline bool cxd56_audio_clock_is_enabled(void);
      |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
platform/audio/cxd56_audio_analog.c:68:13: warning: inline function 'cxd56_audio_clock_disable' declared but never defined
   68 | inline void cxd56_audio_clock_disable(void);
      |             ^~~~~~~~~~~~~~~~~~~~~~~~~
platform/audio/cxd56_audio_analog.c:67:13: warning: inline function 'cxd56_audio_clock_enable' declared but never defined
   67 | inline void cxd56_audio_clock_enable(uint32_t clk, uint32_t div);
      |             ^~~~~~~~~~~~~~~~~~~~~~~~

chip/stm32_adc.c: In function 'adc_reset':
chip/stm32_adc.c:1348:7: warning: unused variable 'ret' [-Wunused-variable]
 1348 |   int ret;
      |       ^~~
chip/stm32_adc.c: In function 'adc_shutdown':
chip/stm32_adc.c:1496:7: warning: unused variable 'ret' [-Wunused-variable]
 1496 |   int ret;
      |       ^~~

chip/stm32_i2c.c:729:12: warning: 'stm32_i2c_sem_wait_uninterruptble' defined but not used [-Wunused-function]
  729 | static int stm32_i2c_sem_wait_uninterruptble(FAR struct i2c_master_s *dev)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

wireless/lpwan/sx127x/sx127x.c:147:52: warning: missing terminating ' character
  147 | #  warning OOK support is not complete, RX+TX doesn't work yet!
      |                                                    ^

str71_spi.c:435:24: warning: initialization of 'uint32_t (*)(struct spi_dev_s *, uint32_t)' {aka 'unsigned int (*)(struct spi_dev_s *, unsigned int)'} from incompatible pointer type
                                               'uint16_t (*)(struct spi_dev_s *, uint16_t)' {aka 'short unsigned int (*)(struct spi_dev_s *, short unsigned int)'} [-Wincompatible-pointer-types]
  435 |   .send              = spi_send,
      |                        ^~~~~~~~
str71_spi.c:435:24: note: (near initialization for 'g_spiops.send')

chip/pic32mx-lowconsole.c:147:24: warning: 'pic32mx_getreg' defined but not used [-Wunused-function]
 static inline uint32_t pic32mx_getreg(uintptr_t uart_base,
                        ^
chip/pic32mx-gpio.c:113:20: warning: 'pic32mx_value' defined but not used [-Wunused-function]
 static inline bool pic32mx_value(uint16_t pinset)
                    ^
chip/pic32mz-gpio.c:124:20: warning: 'pic32mz_value' defined but not used [-Wunused-function]
 static inline bool pic32mz_value(pinset_t pinset)
                    ^
chip/pic32mx-usbdev.c:3065:1: warning: 'pic32mx_epreserved' defined but not used [-Wunused-function]
 pic32mx_epreserved(struct pic32mx_usbdev_s *priv, int epno)
 ^

mmcsd/mmcsd_spi.c: In function 'mmcsd_mediachanged':
mmcsd/mmcsd_spi.c:1938:7: warning: 'return' with a value, in function returning void
       return ret;
       ^

In file included from partition/fs_partition.c:42:0:
partition/partition.h:66:19: warning: 'read_partition_block' defined but not used [-Wunused-function]
 static inline int read_partition_block(FAR struct partition_state_s *state,
                   ^

local/local_netpoll.c: In function 'local_pollsetup':
local/local_netpoll.c:305:1: warning: label 'pollerr' defined but not used [-Wunused-label]
 pollerr:
 ^~~~~~~

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: If3ea8f32b878aa218072130f7c3018f0d3c1aca5
2020-04-13 12:01:39 -06:00
Nathan Hartman
34113810bd Fix nxstyle errors in previous commit. 2020-04-12 15:49:35 -06:00
Nathan Hartman
743dcd8acf Fix suspect DEBUGASSERT() like PR765
As pointed out by Şükrü Bahadır Arslan in PR765, function calls
inside DEBUGASSERT() will not be executed if DEBUGASSERT is
disabled. Following that PR, I searched for other instances of
similar errors and found four. As there are many thousands of
DEBUGASSERT in the code, this is *not* an exhaustive fix.

arch/arm/src/tms570/tms570_boot.c:
* In function arm_boot(), call tms570_memtest_complete()
  outside of the DEBUGASSERT(). Otherwise, if DEBUGASSERT is
  disabled, we will never rendezvous with completion of the
  test. (Two instances of this fix.)

arch/arm/src/tms570/tms570_clockconfig.c:
* In function tms570_clockconfig(), call
  tms570_efc_selftest_complete() outside of the DEBUGASSERT()
  for the same reason as above.

boards/arm/sam34/sam4s-xplained-pro/src/sam_boot.c:
* In function board_late_initialize(), call
  sam_watchdog_initialize() outside of the DEBUGASSERT() for
  the same reason as above.
2020-04-12 15:49:35 -06:00
chao.an
c3b0848284 misc/Kconfig: enable LIBC_IOCTL_VARIADIC by default
Change-Id: I7bc23a6552af7b443eb433e4d2e3c2c8784b3956
Signed-off-by: chao.an <anchao@xiaomi.com>
2020-04-12 09:27:41 -06:00
Gregory Nutt
8b87baa714 Update README.txt files for boards using SDCC
Modified boards/z80/z180/p112/README.txt and boards/z80/z80/z80sim/README.txt:

IMPORTANT NOTE as of 2020-4-11:  Support for CONFIG_CAN_PASS_STRUCTS was removed in NuttX-9.1.  This was necessary to enforce some POSIX interface compliance but also means that ALL older SDCC versions will no long build with NuttX.  I have been told that the newest SDCC compilers can indeed pass structure and union parameters and return values.  If that is correct, then perhaps the newer SDCC compilers will be used.  Otherwise, it will be necessary to use some other, more compliant compiler.
2020-04-11 21:19:47 +01:00
liuhaitao
459ad99373 Use EXTRAFLAGS instead of EXTRADEFINES to be used by make via command line
So call 'make EXTRAFLAGS=-Wno-cpp' could suppress the warnings with pre-processor
directive #warning in GCC.

Change-Id: Iaa618238924c9969bf91db22117b39e6d2fc9bb6
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-04-11 08:31:08 -06:00
NicoMayer
afe08b666c
boards/arm/stm32/nucleo-f429zi: Port Nuttx to Nucleo-F429zi (#752)
* boards/arm/stm32/nucleo-f429zi: Initial port to nucleo-f429zi board.

* boards/arm/stm32/nucleo-f429zi: Add two demo configs.

* Add the nucleo-f429zi to boards/Kconfig

boards/Kcondig: Fixed line alignment issue.

* boards/arm/stm32/nucleo-f429zi: Change the license header of all new files to an Apache 2.0 license.

* boards/arm/stm32/nucleo-f429zi: nxstyle fixed
2020-04-09 03:59:57 -07:00
hartmannathan
bfc153ca27
Fix typos in comments and documentation (#750)
* Fix typos in comments and documentation
2020-04-08 06:45:35 -06:00
Gregory Nutt
9c7841aff1 boards/sim/sim/sim/configs/ostest: Enable cancellation tests. 2020-04-07 19:59:13 +01:00
Nakamura, Yuuichi
9029e4daee Fix nxstyle issues 2020-04-07 06:23:15 -06:00
Nakamura, Yuuichi
2ca9681b00 Remove type casting to wdentry_t (boards/) 2020-04-07 06:23:15 -06:00
YAMAMOTO Takashi
4311e5e724 sim: Enable RTC stuff in vpnkit config
To avoid surprises with wrong timestamps for some network applications.
2020-04-02 14:16:54 +08:00
YAMAMOTO Takashi
a7415058e5 sim: Update vpnkit config
* Enable CONFIG_NETINIT_DHCPC as it's simpler to use
  the configuration from vpnkit's dhcp server

* Refresh after the recent STACKSIZE changes
2020-04-01 19:50:22 +08:00
YAMAMOTO Takashi
80c05979fe sim: enable CONFIG_TESTING_OSTEST_POWEROFF in ostest config
To make it easier to run on CI jobs.
2020-03-30 22:10:56 -05:00
Gregory Nutt
ae401cecdd Check return from nxsem_wait_initialize()
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution:  Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly.  This commit is only for those files under fs/driver, fs/aio, fs/nfs, crypto/, and boards/.

Please note:  The modified file under fs/nfs generates several " Mixed case identifier found" errors.  Please ignore these.  These cannot be fixed without changes to numerous other files.  They also follow a non-standard convention that is used many files:  Using lower case structure names in custom SIZEOF_ definitions.
2020-03-30 17:09:45 +01:00
YAMAMOTO Takashi
a25ad63582 esp32: Bump idle stack size
This fixes crashes in ostest with the smp config.
The value was taken from ostest config.
Note that this board doesn't implement interrupt stack.
2020-03-30 11:46:25 -03:00
YAMAMOTO Takashi
3d78be81d2 esp32: README: Add FT232HL jumper settings and pin outs 2020-03-30 09:59:05 +01:00
YAMAMOTO Takashi
23e2c17a0f sim: Remove CONFIG_SIM_M32 and CONFIG_ELF where unnecessary
Namely these defconfig files:

    boards/sim/sim/sim/configs/mtdpart/defconfig
    boards/sim/sim/sim/configs/mtdrwb/defconfig
    boards/sim/sim/sim/configs/rpproxy/defconfig
    boards/sim/sim/sim/configs/rpserver/defconfig
    boards/sim/sim/sim/configs/tcpblaster/defconfig

Because the recent versions of macOS is 64-bit only and thus
incompatible with CONFIG_SIM_M32=y.

The following defconfig files are left intact as these configs
are important for them:

    boards/sim/sim/sim/configs/loadable/defconfig
    boards/sim/sim/sim/configs/module32/defconfig
2020-03-30 02:26:01 -05:00
YAMAMOTO Takashi
34de90e632 esp32: Another OpenOCD example config 2020-03-29 23:55:45 -05:00
YAMAMOTO Takashi
2b139625bb sim: Add a config to test examples/{module,sotest} with -m32 2020-03-29 14:16:14 +01:00
YAMAMOTO Takashi
4ae8e435d1 sim: Add a config to test examples/{module,sotest} 2020-03-29 14:16:14 +01:00
YAMAMOTO Takashi
01c91e8af8 sim: Remove CONFIG_RAW_BINARY=y from configs
Because:

* A raw binary doesn't make sense for sim, where ./nuttx is
  a host OS executable.

* It breaks test builds on macOS, where native objcopy
  is not available.
2020-03-28 10:47:43 -05:00
Brennan Ashton
f787df1d38 Pull the ESP32 binary blobs from a configurable path 2020-03-28 06:58:35 -05:00
YAMAMOTO Takashi
2f6d458bcf sim/README: Mention macOS 2020-03-27 02:42:11 -05:00
YAMAMOTO Takashi
748777e3f5 sim: MODULE definitions for macOS 2020-03-27 00:04:36 -05:00
YAMAMOTO Takashi
f8077022bd Introduce CONFIG_DEFAULT_TASK_STACKSIZE
* The appropriate size of stack varies among archs.
  E.g. for 64-bit sim, 2048 is way too small, especially when the task
  happens to use host OS functionalities.
  I plan to allow an arch provide its own default.

* I plan to use this to replace hardcoded "STACKSIZE = 2048" in APPDIR.
2020-03-26 22:30:13 -05:00
Gregory Nutt
5c0e8e88b1 Revert "Makefile: move INCDIROPT to common place (#625)"
This reverts commit b9ace36fcc.

This change was added by PR 625 but has a serious logic flaw.  It removes all occurrences of INCDIROPT and replaces it with a definition in tools/Config.mk:

    else ifeq ($(WINTOOL),y)
      DEFINE = "$(TOPDIR)/tools/define.sh"
      INCDIR = "$(TOPDIR)/tools/incdir.sh" -w

This logic flaw is the Config.mk is included in all Make.defs files BEFORE WINTOOL is defined.  As a result, the definition is wrong in many places when building under Cygwin with a Windows native toolchain.
2020-03-26 08:50:29 -07:00
Xiang Xiao
b9ace36fcc
Makefile: move INCDIROPT to common place (#625) 2020-03-26 08:09:59 -06:00
YAMAMOTO Takashi
f19355132a sim: Mention vpnkit docker image 2020-03-24 20:49:19 -05:00
YAMAMOTO Takashi
702d82d052 vpnkit: Add a config to specify the socket 2020-03-23 14:37:56 -05:00
Xiang Xiao
e4c8f5d767 esp32: Guard the binary generation with CONFIG_ESP32CORE_BINARY 2020-03-23 19:19:43 +00:00
Xiang Xiao
d2e6378322 Move CXD56_BINARY to boards/arm/cxd56xx/spresense/Kconfig 2020-03-23 19:19:40 +00:00
YAMAMOTO Takashi
1ffa009c8b Revert "Don't generate .depend anymore"
This reverts commit 79af7fbf4e.

Because:

* btashton reported some issues in local builds:

  https://github.com/apache/incubator-nuttx/pull/603#issuecomment-602264860

* this might be related to the current CI breakage:

  > /bin/sh: 1: /__w/incubator-nuttx/incubator-nuttx/nuttx/tools/mkdeps: not found
2020-03-22 23:07:29 -05:00
Xiang Xiao
79af7fbf4e
Don't generate .depend anymore 2020-03-22 18:15:29 +00:00
raiden00pl
1b4425ab5d boards/arm/xmc4: add initial support for the Infineon XMC4700 Relax board 2020-03-22 08:29:51 -06:00
Gregory Nutt
547a3cb3d9 Run all .c and .h files in previous commits through nxstyle. 2020-03-22 08:24:07 -05:00
Gregory Nutt
f7e11fb2a6 boards/: Remove references to CONFIG_FS_WRITABLE
Remove references from defconfig files, README.txt files and a couple of uses in .c files
2020-03-22 08:24:07 -05:00
Miguel Herranz
d410a29693 Support to run NuttX on ESP32 QEMU 2020-03-21 14:03:07 -06:00
raiden00pl
e663f8ea2e xmc4: fix some CS releted issues and remove empty files 2020-03-21 08:52:27 -05:00
aenrbes
d450f5ce77
Add support for Litex VexRiscV. 2020-03-21 06:01:56 +00:00
YAMAMOTO Takashi
5d5878d52d NETWORK-VPNKIT.txt: Fix a typo 2020-03-20 02:44:31 -05:00
YAMAMOTO Takashi
a427b2889b Add a sample config with CONFIG_SIM_NETDEV_VPNKIT 2020-03-19 09:13:32 -05:00
YAMAMOTO Takashi
a1539cf3d3 NETWORK-VPNKIT.txt: Mention vpnkit setup 2020-03-19 09:13:32 -05:00
YAMAMOTO Takashi
d93851148c Document CONFIG_SIM_NETDEV_VPNKIT 2020-03-19 09:13:32 -05:00
YAMAMOTO Takashi
c683bce4cd esp32-core/README: Use the default partition table offset
And mention the relevant ESP-IDF config.
2020-03-18 09:49:40 +01:00
Nathan Hartman
a5e643b0cd Fix typos in comments and documentation. 2020-03-16 20:01:11 -06:00
YAMAMOTO Takashi
430a2178fb esp32-core: Document how to disable RTC watchdog timer 2020-03-16 09:47:48 -06:00
YAMAMOTO Takashi
855751b534 Introduce instruction memory allocator
Necessary for dlfcn etc on ESP32, which has separate memory regions
for instruction and data.

known issues/todo
 * consider something similar to dual heaps for PROTOECTED
 * consider to adapt binfmt as well
2020-03-16 07:54:49 -06:00
YAMAMOTO Takashi
bf2cfd4b1a Add -mtext-section-literals to avoid out of range relocations 2020-03-16 07:54:49 -06:00
YAMAMOTO Takashi
2776a5bbea Replace a few Gregory Nutt's copyright notices with Apache 2.0
The text was copied from sched/sched/sched_getcpu.c.
2020-03-16 07:54:49 -06:00
YAMAMOTO Takashi
b2627225bd Update file paths of copy-and-paste'ed files 2020-03-16 07:54:49 -06:00
YAMAMOTO Takashi
3f80f806ef xtensa: Add module/elf definitions 2020-03-16 07:54:49 -06:00
liuhaitao
efff9b9438 lc823450-xgevk/scripts: remove duplicate flock since ARLOCK already used
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-03-14 14:14:39 -05:00
Gregory Nutt
98b2949e3b z20x: Improve usability of bootloader
boards/z80/ez80/z20x/configs/w25boot/defconfig:  Increase size of serial Tx buffer.

boards/z80/ez80/z20x/src/w25_main.c:  Add some fflush() in necessary places.  Greatly improves the usability of the UI.

boards/z80/ez80/z20x/README.txt:  Trival update to README

drivers/serial/serial.c and tcdrain.c:  Correct some typos.
2020-03-14 14:07:45 -03:00
Gregory Nutt
ef604f8d43 z20x: Performance Improvements
- boards/z80/ez80/z20x/scripts/z20x_*.linkcmd:  Reduce from 4 to 1 wait state.  That i sufficient because of the slow clocking of the eZ80F92
  - boards/z80/ez80/z20x/src/w25_main.c:  Replace CRC algorithm with simple, less time consuming check sum.
  - boards/z80/ez80/z20x/configs/nsh:  Rename the nsh_ram configuration to just nsh
  - boards/z80/ez80/z80x/configs/hello: Add simpler program to make debugging the loader easier.
2020-03-14 00:05:38 +01:00
Jari van Ewijk
963ee6f42e
NXP RDDRONE-UAVCAN boards (S32K1XX) - Clean up clock config (#557)
* RDDRONE-UAVCAN boards - Clean up clock config

* S32K1XX - Style fix 3
2020-03-12 13:56:38 -07:00
Jari van Ewijk
850c7faaa8
NXP S32K1XX EVB boards - clock config cleanup (#556)
* S32K1XX EVB boards - clock config cleanup

* S32K1XX - Style fix 2
2020-03-12 13:55:43 -07:00
YAMAMOTO Takashi
7774cdd7aa Appease many of nxstyle errors for esp32 related files
I skipped the following files because they were not simple.
I'll create separate PRs.

    arch/xtensa/src/esp32/esp32_cpustart.c
    arch/xtensa/src/common/xtensa_abi.h
    boards/xtensa/esp32/esp32-core/include/board.h

Also, I skipped the following files and directories because
they looked too huge and/or foreign.

    arch/xtensa/include/esp32/tie.h
    arch/xtensa/include/xtensa/xtensa_corebits.h
    arch/xtensa/src/esp32/hardware/
    arch/xtensa/include/esp32/tie-asm.h
    arch/xtensa/include/esp32/core-isa.h
    arch/xtensa/include/xtensa/core.h

I also fixed a few "is is" style typos when unwrapping long lines.
2020-03-12 07:45:44 -06:00
YAMAMOTO Takashi
7f6bf93256 boards/xtensa/esp32/esp32-core/include/board.h: nxstyle fixes
The remaining errors:

    Long line found

I didn't fix it because it's on a URL.
There's no good way to wrap a URL as far as I know.
2020-03-11 21:58:25 -05:00
Gregory Nutt
bfc15a6295 z20x: Fixes related to W25 boot configurations.
arch/z80/src/ez80/ez80_timerisr.c:  Correct a mismatch between the programmed reload value and the timer input clock frequency.

arch/z80/src/ez80/ez80f92.h:  Correct error in timer input clock divider:  Bits 2-3, not bits 3-4.

boards/z80/ez80/z20x/src/w25_main.c:  Correct an uninitialized return value; private function was not declard static.
2020-03-11 18:24:43 -03:00
Masayuki Ishikawa
3884c96c75 boards: maix-bit: Remove unnecessary CONFIG_BUILTIN from kostest/defconfig 2020-03-10 03:52:48 -05:00
Gregory Nutt
f886d814b7 z20x: Correct issues loading code from FLASH
boards/z80/ez80/z20x/src/w25_main.c:  (1)  Correct size comparison typo:  Should have been >= not != (2) Fix sizeof():  Was ugetting the sizeof the pointer instead of the sizeof the pointed at structure. (3) Improve some comments.
2020-03-09 20:46:57 -05:00
Gregory Nutt
199b4d6852 z20x: Changes to reduce serial Rx data overrun
boards/z80/ez80/z20x:  Increase RX buffer size to 4Kb, reduce BAUD to 2400 in w25boot configuration
arch/z80/src/ez80/ez80_serial.c:  Reduce Rx FIFO trigger level for eZ80F92 to 1 so that will respond more quickly to incoming data.
2020-03-09 22:51:54 +01:00
Gregory Nutt
4ae9ae9693 z80x: W25 Bootloader Improvements
boards/z80/ez80/z20x/src/w25_main.c:  Improve user interface.

There is still an error occurring while downloading Intex HEX files to FLASH.  That is unrelated to this and appears to be a problem libs/libc/hex2gbin/lib_hex2bin.c
2020-03-08 23:33:04 +01:00
Xiang Xiao
ebae06a6db boards: fix CONFIG_MM_REGIONS related warning in nightly build
fix the following warning:
chip/sam_allocateheap.c:120:8: warning: #warning "CONFIG_MM_REGIONS < 3: NFC SRAM not included in HEAP" [-Wcpp]
  120 | #      warning "CONFIG_MM_REGIONS < 3: NFC SRAM not included in HEAP"
      |        ^~~~~~~
chip/lpc17_40_allocateheap.c:176:6: warning: #warning "CONFIG_MM_REGIONS > 1: This configuration has no available AHB SRAM Bank0/1" [-Wcpp]
  176 | #    warning "CONFIG_MM_REGIONS > 1: This configuration has no available AHB SRAM Bank0/1"
      |      ^~~~~~~
chip/stm32l4_allocateheap.c:141:4: warning: #warning "CONFIG_MM_REGIONS large enough but I do not know what some of the region(s) are" [-Wcpp]
  141 | #  warning "CONFIG_MM_REGIONS large enough but I do not know what some of the region(s) are"
      |    ^~~~~~~

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-03-08 11:29:39 -06:00
Johanne Schock
c7c387735c Comment not closed 2020-03-08 08:52:46 -06:00
Johanne Schock
ac1f5d673a Fixed formatting and comments in board.h and kinetis_k28memorymap.h
Fixed clock calculation in board.h
2020-03-08 08:52:46 -06:00
Gregory Nutt
c9d570d77a boards/sim/sim/sim: Add -fno-strict-aliasing to Make.defs
Adds -fno-strict-aliasing to ARCHOPTIMIZAITON definition for all sim Make.defs file.  This is constistent with the setting used in the Make.defs file of all other architectures and should eliminate the build test warnings:

arp/arp_arpin.c: In function 'arp_arpin':
arp/arp_arpin.c:136:13: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
             net_ipv4addr_hdrcopy(arp->ah_sipaddr, &dev->d_ipaddr);
             ^~~~~~~~~~~~~~~~~~~~
arp/arp_format.c: In function 'arp_format':
arp/arp_format.c:96:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
   net_ipv4addr_hdrcopy(arp->ah_dipaddr, &ipaddr);
   ^~~~~~~~~~~~~~~~~~~~

And similar warnings from icmp/icmp_input.c, and tcp/tcp_send.c.  -fno-strict-aliasing i required for a warning free build of NuttX code since there is use of punned pointers.
2020-03-08 08:41:05 -05:00
Gregory Nutt
1c83406fd1 boards/z80/ez80/z20x: W25 Bootler is Code Complete
Code Complete but still things to be verify before I can claim Functionality Complete.
2020-03-08 03:39:46 -05:00
Gregory Nutt
c8b39b48bb z20x: w25boot configuration nees CONFIG_FS_WRITABLE
boards/z80/ez80/z20x/configs/w25boot/defconfig:  needs CONFIG_FS_WRITABLE=y

Style cleanup / Correct file header

  drivers/bch/bchdev_register.c, drivers/mtd/ftl.c, and fs/driver/fs_findblockdriver.c:
  Run through nxstyle; replace BSD-3 license with Apache 2.0
2020-03-07 16:59:38 -03:00
Johanne Schock
050e45bfe7 Changes for Freedom K28 USB device support 2020-03-07 13:07:37 -06:00
Gregory Nutt
faca2f220e z20x: Timer/Spi Fixes
arch/z80/src/ez80/ez80_timerisr.c:  Fix an error that looks the file got damaged by a bad keystroke in the editor while a string was highlighted.
boards/z80/ez80/z20x/src/ez80_spi.c:  Fix some bad conditional compilationi. Prevented W25 chip select from being initialized.
2020-03-07 17:30:02 +01:00
Ouss4
9daa8441e3 tools/pic32: Add the Config.mk file to execute the post build script.
Update Make.defs and README.txt files in boards directory accordingly.
2020-03-07 08:35:20 -06:00
Ouss4
0d88073644 toos/pic32: Some cosmetic changes.
- Rename the folder to PIC32.
  - Rename the Makefile to Makefile.host
  - Run nxstyle on the C file.
  - Change licenses to ALv2.
2020-03-07 08:35:20 -06:00
Gregory Nutt
493b8de938 Revert "Change SAMA5 files to have apache license headers:"
This reverts commit f735584514.

These header changes introduce unacceptable errors:

1. The changes alter the width of the initial block comment.  That will cause nxstyle failures on most of the files.

2. The third line of the header is an (optional) short description of content of the the file.  This change erroneously removes that line.

Automated header file changes can screw up a lot of files, very quickly.
2020-03-07 08:47:48 -03:00
Gregory Nutt
78563d555a arch/z80/src/ez80/ez80_spi.c: Correct oversight in previous commit
Commit 797e45d6bf attempted to reduce the frequency of SPI reconfiguration by keeping track of the current frequency and mode settings and changing these settings only when the new settings differ from the old settings.

However, the original commit neglected to save the new frequency setting and, hence, was not effective in what it was trying to do:  Every time the SPI setfrequency() method was called, it still looked like a new frequency and the frequency was still reconfigured, even though it hadn't really changed.
2020-03-07 09:59:23 +01:00
liuhaitao
c0e8afc531 cxd56xx: correct comment format in Make.defs to fix build break
Error log as below:
platform/camera/Make.defs:1: *** missing separator.  Stop.
2020-03-06 20:30:43 -06:00
Gregory Nutt
ee9949a724 z20x: Fix some SPI/W25/Timer issues.
arch/z80/src/ez80/ez80_spi.c:  Do not configure SPI chip select pin.  It is not used by the driver and configuring it just clobbers other usage of that pin.  Add some additional debug outputs; correct some exiting debug outputs.

drivers/mtd/w25.c:  Add some debug output.

boards/z80/ez80/z20x/src/ez80_w25.c:  Correct SPI bus number used in initialization.  Only SPI1 is supported.

arch/z80/src/ez80/ez80_timerisr.c:  Some initial timer configuration fixes.
2020-03-06 21:09:14 +01:00
Gregory Nutt
3ee1af5bcc Build System: Resolve CPU-specific logic in common build files
* tools/Config.mk - Add empty definition POSTBUILD
* tools/Makefile.unix/win - Replace CXD56xx specific logic with $(call POSTBUILD)
* boards/arm/cxd56xx/scripts/Config.mk - Add POSTBUILD definitions with logic removed from Makefile.unix/win
* boards/arm/cxd56xx/spresense/scripts/Make.defs - Include the CXD56xx Config.mk immediately after tools/Config.mk so that the empty POSTBUILD definition will be replaced with the correct one

NOTE: There is a precedent for this approach.  This is the way that other architecture-specific build options are implemented.  See, for example, tools/zds/Config.mk
2020-03-06 11:44:53 -06:00
Alin Jerpelea
94a73a8736 cxd56: add configuration for SPECIFIC_DRIVERS
The SPECIFIC_DRIVERS configuration was removed from the drivers Kconfig and
the build will ignore the specific drivers.
This patch enables the config locally for the CXD56 board

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-03-06 08:58:57 -06:00
Alin Jerpelea
34f274f9c0 cxd56: move ISX012 camera sensor driver
This sensor driver needs rework to match the needed layout for standar NuttX driver.
In the meantime it is moved to board specific sensors to fix the violation.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-03-06 08:58:57 -06:00
Adam Feuer
f735584514 Change SAMA5 files to have apache license headers:
- No code changes
- All files are now utf-8 encoded
- Some non-utf-8 characters in comments were changed or removed
2020-03-06 10:33:08 +00:00