sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
6,170 Commits 1 Branch 0 Tags 291 MiB
4cecf0b618
Commit Graph

3000 Commits

Author SHA1 Message Date
Gregory Nutt
b26d5c7164 A few more SAMA5D3 files 2013-07-19 17:45:28 -06:00
Gregory Nutt
4a81d47c86 Basic framework to support the AT91SAMA5D3 family and the SAMA5D3x-EK board(s) in particular 2013-07-19 15:23:03 -06:00
Gregory Nutt
5356bd1bbd More ARMv7-A files that are just copies of the ARMv4/5 files for now 2013-07-19 11:43:04 -06:00
Gregory Nutt
53a4f3443c Minor but fatal typo introduced in last checkin 2013-07-18 15:45:21 -06:00
Gregory Nutt
8f2ad7eec1 Some initial frame for Cortex-A5 support. No much yet 2013-07-18 15:20:47 -06:00
Gregory Nutt
a7ae91c716 NSH cmp command by Andrew Twidgell 2013-07-18 08:24:29 -06:00
Gregory Nutt
f9b9bf6e04 STM32 SDIO driver: Add supported for data block end (DBCKEND) interrupt. From Chia Cheng Tsao 2013-07-08 09:04:05 -06:00
Gregory Nutt
7536b4654b Ticket #16: STM32 OTG FS device driver endpoint allocation. From Chia Cheng Tsao 2013-07-08 08:55:05 -06:00
Gregory Nutt
25c393f371 prohibit re-entrance into sam_configgpio() 2013-07-05 17:15:54 -06:00
Gregory Nutt
94e2f4ceb4 Fix SAM34 interrupt handling for ports D-F; fix MISO logic in Arduino Due touchscreen driver 2013-07-03 08:12:45 -06:00
Gregory Nutt
f0ebaf8312 Several fixes to get a clean compile of the Arduino touch screen 2013-07-02 13:52:09 -06:00
Gregory Nutt
09faaccc02 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
f01a1517df Update LM FLASH definitions for LM4F120. From Vinti 2013-06-29 07:02:56 -06:00
Gregory Nutt
2ba00060bc SAM33/4: Need to disable write protection before modify PIO pin configuration 2013-06-28 15:34:51 -06:00
Gregory Nutt
3505ca7556 Add an NSH configuration for the Arduino Due; Pluse several fixes related to the Due and to the SAM3X in general 2013-06-28 14:32:08 -06:00
Gregory Nutt
e34e1ee987 Arduino Due: Fixes to FLASH address, flash wait states, updated Comments. Now boots and runs a bit before crashing 2013-06-28 11:29:14 -06:00
Gregory Nutt
9956392d00 With these changes the Arduino Due port builds without errors 2013-06-27 15:07:07 -06:00
Gregory Nutt
e0310e2cc8 Flesh out the Arduino Due board configuratino and integrate it with the build and configuration system 2013-06-27 14:24:27 -06:00
Gregory Nutt
293e46e435 Review and update of SAM3/4 header files and conditional logic for SAM3X/A support 2013-06-27 11:06:13 -06:00
Gregory Nutt
bc7ac20616 Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port 2013-06-26 18:46:44 -06:00
Gregory Nutt
d4b7efb34e Add SAM3X/3A pin multiplexing and GPIO encoding header files 2013-06-26 17:02:43 -06:00
Gregory Nutt
f668abaed1 Add SAM3X/3A memory map 2013-06-26 14:37:57 -06:00
Gregory Nutt
3692dfaf26 Add SAM3X/3A peripheral clock controls 2013-06-26 14:00:26 -06:00
Gregory Nutt
b089263e1c Add SAM3X/3A interrupt vectors 2013-06-26 12:59:56 -06:00
Gregory Nutt
18240b07b6 Add support for SAM3X and 3A chips, interrupts, and peripheral IDs 2013-06-26 12:28:32 -06:00
Gregory Nutt
64dd806d89 Fix integration of RAM test into the build and configuration system 2013-06-26 10:54:12 -06:00
Gregory Nutt
3d1f29217e Add support for a separate CCM memory allocator for members of the STM32 family that support CCM memory 2013-06-25 09:13:30 -06:00
Gregory Nutt
8959fffedc SAM4L Xplained SLCD driver is complete 2013-06-23 09:05:20 -06:00
Gregory Nutt
5152ce9f79 Beginning of a driver for the SAM4L LED1 module 2013-06-21 17:42:09 -06:00
Gregory Nutt
add0a67995 Straighten out issues about who calls C++ initializers with CXXTEST or HELLOXX are built as NSH applications; Add an ofstream test to CXXTEST suggested by Michael; Update many defconfig fiels to that they set configurations to handle C++ constructors just as before these configuration changes 2013-06-21 09:32:57 -06:00
Gregory Nutt
59e1d1c6cd More KL25Z SPI fixes 2013-06-20 19:58:45 -06:00
Gregory Nutt
b14f0cf9f7 KL25Z GPIO register dump function now compiles 2013-06-20 18:00:56 -06:00
Gregory Nutt
76f9df2941 Fix backward wait condition in KL24Z SPI driver 2013-06-20 17:39:42 -06:00
Gregory Nutt
d5a0c75bbb Add framework for managing SPI-related discretes on the Freedom KL25Z board. 2013-06-20 13:50:16 -06:00
Gregory Nutt
876fcca8f7 More Freedom KL25Z changed to and from Alan Carvalho de Assis 2013-06-19 20:50:27 -06:00
Gregory Nutt
d8a8679781 Fix errors in KL25Z SPI driver reported by Alan Carvalho de Assis 2013-06-19 19:32:13 -06:00
Gregory Nutt
2cfeed654a Add SAM4L PDCA register definition file 2013-06-19 18:38:31 -06:00
Gregory Nutt
3ed35802ce SPI register definition file updated to include a few differences for the SAM4L 2013-06-19 16:03:19 -06:00
Gregory Nutt
2ede49fd6a SAM4L LCDCS register definitions 2013-06-19 13:59:47 -06:00
Gregory Nutt
2a2de71b5d Add SPI driver for the Freescale KL25Z 2013-06-19 12:10:01 -06:00
Gregory Nutt
f597172733 Add SPI register definitions for the Freescale KL25Z 2013-06-19 09:56:32 -06:00
Gregory Nutt
69fc11bb71 Fix test of NULL pointer in the SAM3/4 SPI driver 2013-06-18 12:16:52 -06:00
Gregory Nutt
177a8c0e9b Freescale KL25Z support from Alan Carvalho de Assis 2013-06-18 11:20:57 -06:00
Gregory Nutt
39dcedb0f1 SAM3/4 SPI phase control (CPHA) is inverted 2013-06-18 09:29:55 -06:00
Gregory Nutt
15e846ad1d Corrections to the Kinetis TSI header file from Alan Carvalho de Assis 2013-06-18 07:14:05 -06:00
Gregory Nutt
c9f1d1857c SAM3U-EK: Correct polarity of the PENIRQ signal 2013-06-16 14:31:18 -06:00
Gregory Nutt
c7fd7a4e27 Re-architected SAM3/4 SPI interface; Change BUSY bit handling in the ADS7843E driver 2013-06-16 10:09:21 -06:00
Gregory Nutt
44fe999aea Add support for the SAM4L Xplained Pro I/O1 module 2013-06-15 10:56:08 -06:00
Gregory Nutt
b1afe69591 Fixes for SAM4S and 4L due to recent changes to SAM3S; Updated README files 2013-06-14 08:54:24 -06:00
Gregory Nutt
8ed39d9f29 SAM3/4S GPIO interrupt changes 2013-06-13 18:53:14 -06:00
Gregory Nutt
9cf942bcb2 SAM3/4: Loop counter for PLL delay must be volatile or it may get optimized away 2013-06-13 16:18:25 -06:00
Gregory Nutt
e26381f0c0 SAM3/4: Some minor design improvements to the SAM3/4 serial driver 2013-06-13 15:16:52 -06:00
Gregory Nutt
3a351b60e1 Fix error in AT91SAM SPI driver introduced in recent comment. Varioius improvements to README files and debug output 2013-06-13 13:38:31 -06:00
Gregory Nutt
1f056e3826 Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors 2013-06-13 11:04:18 -06:00
Gregory Nutt
507bacc6d5 Correct border colors for SAM3U-EK border; clean up some comments; make sure that sam_vectors.S is identical to stam32_vectors.S 2013-06-12 19:42:39 -06:00
Gregory Nutt
83ecc03d17 Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup 2013-06-12 17:32:00 -06:00
Gregory Nutt
535dc49dea Misc updates to SAM3U register definition files for SAM4S compatibility 2013-06-12 12:35:48 -06:00
Gregory Nutt
fa45b86b4d SAM4S: Add NSH configuration. Calibrated delay loops. Port now seems fully functional 2013-06-12 10:56:42 -06:00
Gregory Nutt
d9cec43398 Correct SAM3S-Xplained load address, FLASH wait states, and UART1 pin configuration 2013-06-12 08:18:42 -06:00
Gregory Nutt
a2a91bf8d6 Use UART1 for the console on the SAM4S-Xplained not USART0 2013-06-11 19:24:47 -06:00
Gregory Nutt
1ca5db1ebc Changes for a clean build of configs/sam4s-xplained 2013-06-11 17:33:43 -06:00
Gregory Nutt
94a2776337 Add configs/sam4s-xplained 2013-06-11 16:29:59 -06:00
Gregory Nutt
54c777ef0d SAM4S: Add macros to manage peripheral clocks 2013-06-11 15:42:30 -06:00
Gregory Nutt
03698ca7e2 SAM4S: Add pin multiplexing definitions 2013-06-11 14:32:07 -06:00
Gregory Nutt
ce8b9c0d3c SAM4S: GPIO, chip characteristics, peripheral Kconfig 2013-06-11 12:28:31 -06:00
Gregory Nutt
bafe910ce4 SAM4S: Add memory map and interrupt logic 2013-06-10 16:18:47 -06:00
Gregory Nutt
76867c132e Beginning updates of SAM3U header files o include support for the SAM4S: WDT, SUPC, EEFC, MATRIX, and PMC 2013-06-10 11:57:37 -06:00
Gregory Nutt
3938eeeb96 SAM4L: Extend interrupt support for the larger number of NVIC interrupts of the SAM4L 2013-06-09 13:00:38 -06:00
Gregory Nutt
3eefc08c12 SAM4L: Add an NSH configuration and C++ support 2013-06-09 11:43:20 -06:00
Gregory Nutt
b24d51c3c7 SAM4L: Mic fixes to get the SAM4L Xplained running. The ostest now passes. 2013-06-09 10:57:42 -06:00
Gregory Nutt
cc8906e701 SAM3U/4L changes to hide differences by clocking in those MCUs 2013-06-08 13:50:42 -06:00
Gregory Nutt
88226dd5b1 SAM4L: Add USART/UART register definition header files 2013-06-08 11:39:06 -06:00
Gregory Nutt
fe868bc8b2 SM4L: USB clock configuration and WDT register definition file 2013-06-08 09:21:20 -06:00
Gregory Nutt
2d5c249072 SAM4L: Add logic to configure FLASH read mode and wait states 2013-06-07 18:12:00 -06:00
Gregory Nutt
11f81d3bfa SAM4L: Add logic to enable selected peripherals on power up; Extend configuration so that each peripheral can be selected -- even though the drivers are not yet implemented 2013-06-07 14:59:33 -06:00
Gregory Nutt
7207be4f84 SAM4L: Add DFLL0 support, add logic to set the power scaling mode, add support for RAM functions 2013-06-07 13:26:55 -06:00
Gregory Nutt
5052df2e69 Update SAM4L PLL0 logic 2013-06-07 10:28:06 -06:00
Gregory Nutt
f4954c743d Add logic to enable SAM4L clocks 2013-06-06 19:11:32 -06:00
Gregory Nutt
2864dfac0d Add SAM4L BSCIF register definition file 2013-06-06 16:24:33 -06:00
Gregory Nutt
168702f7e1 Fix a backward conditional that cause the STM32 usb host driver to fail to detect disconnection events. From Scott 2013-06-06 15:00:18 -06:00
Gregory Nutt
3edec35c51 Add flow control support to the STM32 serial driver; Fix some issues with UART2 and 5. From Lorenz Meier and Mike Smith 2013-06-06 14:49:14 -06:00
Gregory Nutt
38c7818ea8 Add register definitions for SAM4L BPM and SCIF blocks 2013-06-06 11:19:18 -06:00
Gregory Nutt
e352d4f3ad Add register definitions for SAM4L BPM and SCIF blocks; SAM4L clock initialization now selects an optimal power scaling mode 2013-06-06 11:18:52 -06:00
Gregory Nutt
93b67f1598 Move SAM4L peripheral clock logic to a separate file 2013-06-05 18:48:30 -06:00
Gregory Nutt
30f5d90430 Updates to SAM4L clocking. Still not finished 2013-06-05 16:41:52 -06:00
Gregory Nutt
19b38fa95f Add power management register defintions and clock control logic for the SAM4L 2013-06-05 13:35:19 -06:00
Gregory Nutt
82d37c755b Add SAM4L FLASHCALW header file 2013-06-05 10:43:33 -06:00
Gregory Nutt
efce99ba6f SAM4L GPIO port addressing fixes; SAM4L Xplained LED support; minor documentation updates 2013-06-05 08:54:37 -06:00
Gregory Nutt
52ce4f84ff Add configs/sam4l-xplained/src/up_userleds.c 2013-06-04 16:35:43 -06:00
Gregory Nutt
5cdcdaf0bd More changes that should have gone with the last commit 2013-06-04 15:23:47 -06:00
Gregory Nutt
7ddaf6efc7 Add SAM4L GPIO driver 2013-06-04 15:12:56 -06:00
Gregory Nutt
e35d569477 Create SAM4L GPIO driver header file 2013-06-04 13:33:30 -06:00
Gregory Nutt
2fb1a3269b Add SAM4L (and 4S) GPIO register definitions 2013-06-04 11:38:23 -06:00
Gregory Nutt
1d8c8c0999 If CONFIG_STM32_DMACAPABLE is defined, use stm32_dmacapable to workaround attempt SPI DMAs from the CCM stack 2013-06-04 09:05:39 -06:00
Gregory Nutt
e023ccf016 Add stm32_dmacapable interface to determine is it is possible to perform DMA from a given address. 2013-06-04 08:44:49 -06:00
Gregory Nutt
29de68525d SAM4L alternate pin mapping header file; Use USART1 for virtual COM port console 2013-06-03 17:53:05 -06:00
Gregory Nutt
a732e03139 Add a skeleton configuration that will eventually support the SAM4L Xplained Pro board 2013-06-03 15:11:56 -06:00
Gregory Nutt
081d3f989d Add vector and chip cability definitions for the SAM4L family 2013-06-03 11:23:41 -06:00
Gregory Nutt
3613d6ed8b Add interrupt and memory map definitions for the AT91SAM4L 2013-06-03 09:32:04 -06:00
Gregory Nutt
5f97fb8041 Rename sam3u/ architecture directories to sam34/ to include the SAM4L 2013-06-02 13:57:22 -06:00
Gregory Nutt
7bfa4e299c Add missing NSH configuration settings. Correct some conditional logic for STM32 FALSH pre-fetch settings. From Lorenz Meier 2013-06-02 13:16:35 -06:00
Gregory Nutt
b20b0a1839 Eliminated sam3u_internal.h. Use separate header files instead. More renaming from sam3u_ to sam_ to make room in the namespce for the sam4l_ 2013-06-02 13:04:40 -06:00
Gregory Nutt
28c64c90bd Move SAM3U header files to arch/arm/src/sam3u/chip. Some renaming of SAM3U to SAM to ssupport SAM4. Convert all configs/sam3u-ek configurations to use the kconfig-frontends tool 2013-06-02 10:33:57 -06:00
Gregory Nutt
4748599a43 .dSYM only needs to be in the same .gitignore files as .exe 2013-05-30 15:02:04 -06:00
Gregory Nutt
7554d2888e Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files 2013-05-30 14:45:31 -06:00
Gregory Nutt
aa9589ac8f Fix STM32F1 and F3 USB device driver. It was not handling NULL packets correctly and it prevent use of the driver with the CDC/ACM class 2013-05-29 10:26:00 -06:00
Gregory Nutt
680e570cc4 Add support for the STM32 Tiny development board from Laurent Latil 2013-05-28 14:24:17 -06:00
Gregory Nutt
1df321aed4 STM32F103C4 and F103C8 chip support from Laurent Latil 2013-05-28 14:09:44 -06:00
Gregory Nutt
6d3a292f02 Fix null packet handling in the PIC32 USB device driver. This is a critical bug fix for PIC32. Add support for the USB monitor to the Sure-PIC32MX configuration 2013-05-28 13:36:01 -06:00
Gregory Nutt
fc0209c445 Fix Sure PIC32 LOOPSPERMSEC 2013-05-27 16:29:41 -06:00
Gregory Nutt
d4e7f7fa94 Converted all configurations to use the kconfig-frontends tools, cleaned up the directory structure and naming to match some of the more recent configurations, and added a segment LCD driver for the board. The initial checkin of the LCD driver is just a clone of configs/pcblogic-pic32mx/src/pic32mx_lcd1602 and it not yet expected to be functional. 2013-05-26 16:44:53 -06:00
Gregory Nutt
af870d7ae3 Fix bugs in SLCD test and in SLCD CODEC 2013-05-24 11:11:48 -06:00
Gregory Nutt
5bb3a187ef Add apps/examples/slcd, Remove USB from STM32L-Discovery, LSE support for the STM32 L family, some STM32L-Discovery LCD debug changes 2013-05-24 10:00:54 -06:00
Gregory Nutt
abf8c8a13a STM32L-Discovery LCD driver is code compele but untested 2013-05-23 15:23:29 -06:00
Gregory Nutt
eb35cbf558 Beginning of a segment LCD driver for the STM32L-Discovery 2013-05-22 18:12:54 -06:00
Gregory Nutt
afa905fc15 Audio subystem update from Ken Pettit. Plus moved some header files 2013-05-21 13:13:05 -06:00
Gregory Nutt
28112cea0f Add STM32L15X segment LCD register definitions; Updated documentatin and README files 2013-05-21 12:39:48 -06:00
Gregory Nutt
e4d906960a Fix STM32L15X vector definitions; Fix STM32L-Discovery LED controls. The NSH configuration is now fully functional on the STM32L-Discovery board. 2013-05-21 11:25:30 -06:00
Gregory Nutt
9ea58951b4 STM32L152: Better LOOPSPERMSEC; Need to set higher performance VOS 2013-05-20 15:51:37 -06:00
Gregory Nutt
b475e965a6 Internal FLASH MTD driver for TI/Stellaris from Max Holtzberg 2013-05-20 12:47:54 -06:00
Gregory Nutt
4b3c3b4cef Fix STM32L-Discovery clock setup - The X3 crystal is not fitted on the board 2013-05-20 12:17:34 -06:00
Gregory Nutt
5ad97e995c Misc updates to STL32L15X logic 2013-05-20 10:08:44 -06:00
Gregory Nutt
c193d3fad3 Add STM32L152X RCC PLL and FLASH support. Now compiles errorfree. 2013-05-19 14:35:30 -06:00
Gregory Nutt
63679d05a6 STM32L15X UART, DMA, and heap initialization support 2013-05-19 11:54:56 -06:00
Gregory Nutt
5d80dfd129 Add SYSCFG definitions for STM32L152; Add board support STM32L-Discovery 2013-05-19 11:04:19 -06:00
Gregory Nutt
e5b21a96d4 Add PWR and RCC register definitions for the STM32F152 2013-05-19 08:55:36 -06:00
Gregory Nutt
66b8913e18 Add STM32L15X memory map 2013-05-18 16:08:28 -06:00
Gregory Nutt
97844b79a1 Add support for STM32L15X GPIOs 2013-05-18 15:32:50 -06:00
Gregory Nutt
96b91d5dc7 Support for STM32L15xx interrupt vectors 2013-05-18 12:56:03 -06:00
Gregory Nutt
7629593f72 Begnning of support for the STM32L15X family 2013-05-18 11:15:37 -06:00
Gregory Nutt
9de230d9a3 Fix STM32 F1 DMA register definitions. From Laurent Latil. 2013-05-15 16:11:16 -06:00
Gregory Nutt
8447e76779 Clean up of pirelli-dpl10/nsh_highram configuration 2013-05-15 08:29:04 -06:00
Gregory Nutt
88c0911fb1 Various changes and bigfixes for problems detected by CppCheck 2013-05-09 14:23:34 -06:00
Gregory Nutt
c9fcc7eef4 Fix typo is STM32 ADC driver for F2 and F4: ADC not ACD 2013-05-08 21:45:46 -06:00
Gregory Nutt
44dc7c713b Fix for lpc17xx i2c single byte read timeout error problem from M.Kannan 2013-05-08 06:57:55 -06:00
Gregory Nutt
24368a6581 STM32 option to disable sleep to prevent disconnection of debugger 2013-05-07 14:10:34 -06:00
Gregory Nutt
fae527deef The Kinetis GPIO logic had some of the same issues as did the Kinetis L 2013-05-06 11:49:28 -06:00
Gregory Nutt
7628d3aa57 Fixes LEDs on the Freedom KL25Z board 2013-05-06 11:07:53 -06:00
Gregory Nutt
f1298f03a1 Convert configs/pirelli_dpl10/nsh_highram to use the kconfig-frontends tools 2013-05-05 10:38:02 -06:00
Gregory Nutt
ca5641f2d7 Make Pirelli-DLP10 a true board configuration; Calypso no compiles without errors 2013-05-05 09:10:47 -06:00
Gregory Nutt
b934926bd2 Repartitioning of header files for Kinetis L 2013-05-02 09:24:36 -06:00
Gregory Nutt
0d1cf112cf Changes to remove some warning sduring compilation for ZKit-arm-1769 Board. 2013-05-02 06:28:59 -06:00
Gregory Nutt
1cf695cbec Freedom KL25Z pin mux'ing fixes from Alan Carvalho de Assis 2013-05-02 06:08:50 -06:00
Gregory Nutt
ba52f8d3ec Misc changes for clean built od mikroe-stm32f4 configurations 2013-05-01 09:21:13 -06:00
Gregory Nutt
f9be47ead2 Add configuration and example to test MTD partitions 2013-04-30 15:54:02 -06:00
Gregory Nutt
fad8a2b555 LPC17: Interrupts not being re-enabled in the initialization function 2013-04-30 08:08:02 -06:00
Gregory Nutt
b630e6a153 Useless TIOCSERGSTRUCT logic in most serial drivers is not compiled unless CONFIG_DEBUG and CONFIG_SERIAL_TIOCSERGSTRUCT are defined 2013-04-25 15:52:48 -06:00
Gregory Nutt
f9b9875952 Various Kconfig files still have references to CONFIG_ variables. Some in harmless comments, some in config definionts which is not harmless. All removed 2013-04-25 15:52:00 -06:00
Gregory Nutt
86b815373a Remove up_assert_code 2013-04-25 15:19:59 -06:00
Gregory Nutt
e9a29d9465 KL15Z: Fix GPIO base addresses; remove GCR header file 2013-04-25 12:24:11 -06:00
Gregory Nutt
a7ea7dbee0 KL25Z typos: AIPS, not APS or AIP 2013-04-25 11:10:58 -06:00
Gregory Nutt
3d4ee6f061 KL25Z: No Ethernet, no SDHC. TPM instead of FTM 2013-04-25 10:35:18 -06:00
Gregory Nutt
2b411b516a KL25Z: Fix serial driver; freedom-kl25z/nsh configuration now works 2013-04-25 10:23:47 -06:00
Gregory Nutt
50d1a961bc KL25Z: Fix some memory mapp and register definitions; no UART3-5 2013-04-25 09:06:58 -06:00
Gregory Nutt
2e04ad2608 Fix KL25Z clock definitions in board.h 2013-04-24 18:29:26 -06:00
Gregory Nutt
7fe5a2b78d Minor Freedom-KL25Z updates 2013-04-24 16:46:38 -06:00
Gregory Nutt
69d3978837 Adding missing registration of /dev/zero; Condition registration of /dev/null. From Ken Petit 2013-04-24 07:17:49 -06:00
Gregory Nutt
a8e2ff3420 Correction to ARM RAM vectors logic from Paul Y. Zhang 2013-04-23 09:32:11 -06:00
Gregory Nutt
25270695ee LPC17xx ADC: Configure all ADC pins in the set, not just one. From MKannan 2013-04-23 08:47:21 -06:00
Gregory Nutt
b553609351 New Kconfig convention: Extra indentation in comments will render as HTML preformatted text 2013-04-22 09:10:58 -06:00
Gregory Nutt
5187631e30 _exit() should not call atexit() or on_exit() functions; Rename task_deletecurrent() to task_exit() 2013-04-18 16:15:20 -06:00
Gregory Nutt
32dbe33498 Cosmetic updates 2013-04-18 11:38:51 -06:00
Gregory Nutt
02a9ce65c3 Fix typo in the STM32 F IRQ file -- from Paul Zhang 2013-04-17 20:27:43 -06:00
Gregory Nutt
a5f5bc72ba cosmetic change to kl_clockconfig 2013-04-17 20:25:33 -06:00
Gregory Nutt
313d1005a8 Fix Freedom KL25Z SysTick rate 2013-04-17 12:44:13 -06:00
Gregory Nutt
504b25ee2b Update authorship 2013-04-17 07:39:32 -06:00
Gregory Nutt
e709b43fb0 Addition cleanup after last switch from BASEPRI to PRIMASK for Cortex-M0 2013-04-16 18:29:01 -06:00
Gregory Nutt
5ec812ff77 Fix major misthink in Cortex-M0 port: The Cortex-M0 has no BASEPRI register. We have to revert to using the nasty PRIMASK register 2013-04-16 18:00:59 -06:00
Gregory Nutt
10394cb48e Fix KL25Z interrupt enable/disable logic 2013-04-16 14:54:08 -06:00
Gregory Nutt
8e5ae3886d Some clocking fixes for the Freedom KL25Z 2013-04-16 14:06:16 -06:00
Gregory Nutt
51debd1cf5 Misc changes for clean compilation of freedom-kl25z config 2013-04-16 09:53:15 -06:00
Gregory Nutt
7f21e8dc4c Initial support for the Kinetis L family and the Freedom KL25Z board from Alan Carvalho de Assis 2013-04-16 08:48:42 -06:00
Gregory Nutt
f0bcd23f9c Cosmetic renaming of LPC178x GPIO macros -- mostly from Rommel Marcelo 2013-04-12 17:48:50 -06:00
Gregory Nutt
ae9aa45835 Configure STM3210E-EVAL usbserial configuration to use kconfig-frontends tools 2013-04-12 09:21:51 -06:00
Gregory Nutt
f01b7e15c8 Fixes to the LM4F clock configuration. Errors in register handling caused everything to run at half speed 2013-04-09 17:27:13 -06:00
Gregory Nutt
f8675d96b2 Back out the LPC1788 GPIO typemask logic that was just checked in. This is not necessary 2013-04-08 18:58:50 -06:00
Gregory Nutt
5fb53f191a LPC1788 framebuffer LCD now works! From Rommel Marcelo 2013-04-08 18:35:51 -06:00
Gregory Nutt
560c30892c Use default optimization of -Os for all ARMv6-M tools 2013-04-08 18:34:16 -06:00
Gregory Nutt
7bd3ffd3b5 Minor improvements to comments and debug output 2013-04-08 09:55:12 -06:00
Gregory Nutt
333b49f555 LPC178x SYSCON matrix definitions from Rommel Marcelo 2013-04-07 16:30:47 -06:00
Gregory Nutt
141fb6a32b LPC17xx GPIO interrupt fixes: lpc17_setintedge() must be atomic. Can't disable interrupts from interrupt handlers because they are automatically re-enabled. Try re-configuring pin instead. 2013-04-07 13:46:05 -06:00
Gregory Nutt
a3906f2f72 cosmetic 2013-04-07 08:44:15 -06:00
Gregory Nutt
9f017b4979 Executable extension was being applied twice 2013-04-07 08:43:44 -06:00
Gregory Nutt
bd4a3a2847 LPC178x GPIO update from Rommel Marcelo 2013-04-07 08:43:08 -06:00
Gregory Nutt
f4692eb34e Fix heap size for the STM32 F427/F437 -- from Mike Smith 2013-04-06 14:30:15 -06:00
Gregory Nutt
c346e6d323 Fix LPC178x I2C mode GPIO configuration 2013-04-06 08:04:17 -06:00
Gregory Nutt
9bed2a5906 More updates to the LPC17x/18x GPIO driver from Rommel Marcelo 2013-04-05 18:22:31 -06:00
Gregory Nutt
1925e60dd1 fix LPC177x/8x GPIO debug instrumentation 2013-04-05 12:46:53 -06:00
Gregory Nutt
f66e89b8cf Redesign of the LPC178x GPIO logic by Rommel Marcelo 2013-04-05 07:58:30 -06:00
Gregory Nutt
e94faba7f5 Move LPC17xx IOCON register definitions from lpc17_gpio.h to lpc17_iocon.h; fix a few more .gitignore files 2013-04-04 18:12:44 -06:00
Gregory Nutt
db78b76102 Mostly updates and corrections to .gitignore files 2013-04-04 15:39:50 -06:00
Gregory Nutt
23db0682b7 Clone svn:ignore directory atributed to .gitignore files 2013-04-04 14:27:29 -06:00
patacongo
19d2d365a4 Separater LPC176x and LPC178x GPIO logic into separate files 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5815 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-03 23:47:43 +00:00
patacongo
1b3b5db765 Fix error in encoding LPC1788 interupts 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5814 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-03 20:08:23 +00:00
patacongo
e1daee1930 Several fixes for LPC1788 GPIO 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5813 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-03 19:35:21 +00:00
patacongo
e1e8f4debe SSP driver fixes for the LPC178x; Fixes for Open1788 touchscreen driver 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5812 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-02 16:36:19 +00:00
patacongo
b99923d973 More naming changes associated with earlier renaming of LP17xx up_spiinitialize; LPC178x SSP support; Open1788 SSP and touchscreen support 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5811 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-01 22:00:37 +00:00
patacongo
ff7a38605b LPC17xx: Hold off sleep mode while DMA is in progress. Open1788: Reverse sense of the IDLE LED 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5810 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-01 15:52:55 +00:00
patacongo
e185c5404a LPC17xx SPI and SSP initialization functions both called up_spiinitialize(); Changed to lpc17_spinitialize() and lpc17_sspinitialize(). 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5809 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-01 15:02:22 +00:00
patacongo
83c4c55b12 Add support for CAN1 and CAN2 to zkit-arm-1769. From M. Kannan 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5808 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-01 14:10:54 +00:00
patacongo
0bfa1b75e2 Add support for STM32 F427/437 chips. From Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5807 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-01 13:43:31 +00:00
patacongo
70af8aa6a0 LPC1788 LCD fixes from Rommel Marcelo 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5806 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-01 13:10:14 +00:00
patacongo
7430e9b629 Open1788 SDCard DMA works 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5805 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-31 21:11:29 +00:00
patacongo
ee3c2a24dd Several fixes for open1788 SDCARD DMA (more files) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5804 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-31 18:15:19 +00:00
patacongo
27858becc2 Several fixes for open1788 SDCARD DMA 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5803 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-31 18:13:19 +00:00
patacongo
bc247a45a0 FAT fixes for extending directory entries with long file names. From RonenV 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5802 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-31 13:06:22 +00:00
patacongo
49de19ed4b Completes coding of the LPC17 DMA driver 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5801 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-30 17:36:46 +00:00
patacongo
6b255474e3 Start LPC17 DMA support for SDCARD driver 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5800 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-29 22:22:28 +00:00
patacongo
b793ec9c78 Fixes for LPC1788 compile when SDCARD DMA is enabled (still missing DMA logic) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5799 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-29 17:36:17 +00:00
patacongo
366a0e6986 In LPC1788 24-bit color mode, we need to tell NX that the resolution if 32 bpp; Add interfaces to control Open1788 backlight 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5798 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-28 17:12:11 +00:00
patacongo
0af8e9642a Missing parenthesis in NXGL code; add debug output to LPC1788 LCD driver 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5797 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-28 15:04:01 +00:00
patacongo
8f5c161ba2 Misc fixes to get SDRAM support and RAM test to build for the Open1788 platform 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5793 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-27 14:28:43 +00:00
patacongo
edc4fd3f96 Patches for LPC17xx SSP driver from Chris Taglia; patch for RAM test from Rommel Marcelo 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5792 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-27 12:39:21 +00:00
patacongo
fa1d47e4f0 Add apps/system/ramtest. I will use this for the LPC1788 SDRAM bringup 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5791 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-27 00:03:25 +00:00
patacongo
2215873d8a Change the way that BPP is configured for the LPC17xx LCD so that all possible BPP options can be selected 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5790 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-26 22:34:15 +00:00
patacongo
8fb673e7ee Default 24bpp 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5789 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-26 21:34:23 +00:00
patacongo
d9992b32c7 LPC17 LCD driver is code complete and in need of testing 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5788 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-26 20:06:53 +00:00
patacongo
c539bd5037 More lpc17xx LCD logic (still incomplete) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5787 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-26 18:18:50 +00:00
patacongo
b3637d57a2 Some initial LCD logic for the lpc1788 (still a work-in-progress) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5786 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-26 16:56:09 +00:00
patacongo
a60a090907 twr-k60n512 configurations converted to use the kconfig-frontends tools 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5785 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-25 18:18:04 +00:00
patacongo
ebf9960deb convert Kwikstik K40 configurations to use kconfig-frontends tools 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5784 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-25 17:33:41 +00:00
patacongo
c568203ddc Fix LM4F120 LaunchPad serial output. Add support for all 7 LM4F120 UARTs 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5782 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-24 20:40:40 +00:00
patacongo
fde971ed5d Add kernel build support for Stellaris, Kinetis, LPC43, and NUC1xx MCUs 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5781 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-24 17:28:38 +00:00
patacongo
0b6910fe7c Fix an compilation error recently introduced into stm32_vectors.S 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5780 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-23 23:06:51 +00:00
patacongo
a1344d8a44 Rework of kernel build signal dispatch to user-space handlers 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5778 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-23 14:46:02 +00:00
patacongo
2a77c20228 A few fixes related to dispatched signals in kernel mode (there are still issues) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5777 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-22 21:59:05 +00:00
patacongo
eaee3fc423 Fix some errors in stm32_allocateheap.c for STM32 F1 and F3 that crept in recently 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5776 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-22 18:26:03 +00:00
patacongo
6c6df1208f Add a OS test kernel build configuration for the STM32F4Discovery board 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5775 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-22 16:19:59 +00:00
patacongo
d7c53aa6e4 Add kernel build support to the STM32 family and to the STM32F4Discovery board 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5774 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-22 14:49:21 +00:00
patacongo
a31d1f331b Corrections needed after further test of stack-based task arguments 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5771 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-21 23:37:11 +00:00
patacongo
ee885b45d8 Copy siginfo_t to step before calling a user-space signal handler 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5769 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-21 20:02:14 +00:00
patacongo
170952d6e8 Add a up_stack_frame() interface to allocate a frame of data on a task's stack. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5768 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-21 17:35:08 +00:00
patacongo
cce585e320 Fix syscall parameter passing for the case where the number of parameters is >4 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5767 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-21 00:25:17 +00:00
patacongo
f58faf514e In the kernel build, allocate the stacks for kernel threads from the kernel heap so that they are protected from medddling by the applications 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5766 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-20 20:27:08 +00:00
patacongo
3bf2c1b355 Change prototypes of up_create_stack and up_release_stack to include a task type parameter 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5765 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-20 18:22:21 +00:00
patacongo
7f8958d651 Fix various typos assocated with LM4F 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5763 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-20 03:39:17 +00:00
patacongo
6c2fb4405c Directories where the same source files are used to build different objects need to keep those objects in separate directories; LPC17xx updates from Chris Taglia 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5762 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-19 23:40:07 +00:00
patacongo
3c141dd850 If the PRIMASK is used to disable interrupts, then additional logic is required to handle hard faults in the kernel build 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5761 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-19 16:11:23 +00:00
patacongo
a5a4c35954 Add workaround for ADC errata from Chris Taglia 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5760 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-19 14:45:26 +00:00
patacongo
cb74c76617 More LPC1788 updates from Rommel Marcelo 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5759 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-19 13:33:00 +00:00
patacongo
c8e9fcbe69 Fields of vector offset table appear to vary with MCU 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5758 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-19 01:28:50 +00:00
patacongo
aaa240782b In KERNEL mode, need to explicitly set the privilege in the CONTROL register on return from exceptions 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5757 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-19 00:16:27 +00:00
patacongo
854dbf19e5 Add support for ram vectors to the ARMv7-M architecture 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5756 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-18 21:10:08 +00:00
patacongo
3185d5492b LPC1788 SD Card driver updates from Rommel Marcelo 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5753 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-17 23:40:53 +00:00
patacongo
56ce985e7f Add support for nested system calls 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5752 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-17 16:13:28 +00:00
patacongo
4ebca78ada There kernel-side signal handler trampoline needs to run in privileged mode 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5751 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-17 01:10:23 +00:00
patacongo
b3890db5ce Add support for calling to and returning from signal handlers in in user-mode threads 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5750 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-17 00:40:49 +00:00
patacongo
76d1ad21f2 Fix bad conditional logic in mkconfig.c; Add user-mode pthread start-up logic 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5748 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-16 17:37:40 +00:00
patacongo
8bba3440a3 More MPU-related fixes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5746 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-16 00:34:43 +00:00
patacongo
5b98834f2f Fix more compile errors and warnings introduced in recent commits 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5744 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-15 01:32:47 +00:00
patacongo
c5b85860ba Fix a compile error introduced in last commit 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5743 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-15 00:27:26 +00:00
patacongo
3e8bfb1fe1 Switch to user-mode before starting a new task 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5742 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-14 22:44:06 +00:00
patacongo
d960ca3b8d itoa() from Ryan Sundberg 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5741 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-14 18:30:06 +00:00
patacongo
d64396b44b Rename g_heapbase to g_idle_topstack; Fix kernel build heap allocation which cannot use g_heapbase 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5739 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-14 14:42:52 +00:00
patacongo
14298ad8b8 Fixe to kernel build and syscalls. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5738 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-13 17:32:37 +00:00
patacongo
93967f8b7f Fix some ARMv7-M syscall logic 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5736 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-12 21:53:18 +00:00
patacongo
e6c40405c4 More updates to MPU control logic 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5735 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-12 17:50:59 +00:00
patacongo
73ef58fda6 A few early fixes in kernel build testing 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5734 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-12 16:02:48 +00:00
patacongo
23c8c591e9 Updated LPC1788 SDCARD logic from Rommel Marcelo 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5733 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-12 00:19:30 +00:00
patacongo
1549b649a6 Reorganize some AT91SAM3U files; Add an NSH kernel build configuration to the WaveSahhare Open1788 board 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5732 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-11 20:26:55 +00:00
patacongo
00db9fae42 Add MPU support for the LPC17xx family 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5731 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-11 17:51:42 +00:00
patacongo
2b64d4742a Fix a typo that crept into lpc17_allocateheap.c in the recent kernel allocator changes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5729 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-11 13:21:33 +00:00
patacongo
2433c1461b Remove user_map.h; replace with a header at the beginning of the user-space blob. User work queue no started by os_brinup() on behalf of the application 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5727 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-10 23:42:49 +00:00
patacongo
18ca1965b6 AT91SAM3 now supports kernel-mode heap; SAM3U-EK knsh configuration converted to use kconfig-frontends tool 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5726 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-10 19:31:10 +00:00
patacongo
1ef904003e Create sched_ufree and sched_kfree from sched_free; Use user-accessible heap to allocae stacks 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5725 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-10 15:32:33 +00:00
patacongo
1c52dce216 More changes for a kernel-mode allocator (more to be done) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5724 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-09 21:12:20 +00:00
patacongo
43d8762499 ZKIT-ARM-1769 support for ADC and DAC from Rashid 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5723 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-09 13:29:47 +00:00
patacongo
0db8dc83ee up_addregion should use kmm_addregion; move garbage kmm*.c file to mm/. for now 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5721 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-08 22:01:50 +00:00
patacongo
45ce321f51 Move all memory manager globals to a structure. Pass structure pointer as a handler because MM APIs 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5719 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-08 18:29:56 +00:00
patacongo
4b3ad32ee5 Fix network poll() issue: don't interrupt poll if socket not connected. Listen sockets are not connected and the poll() is waiting for connection events. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5717 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-07 17:59:21 +00:00
patacongo
f66f0c3d24 More kernel build fixes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5716 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-07 14:27:47 +00:00
patacongo
c74bef7053 More LPC1788 changes from Rommel Marcelo + a few kernel build fixes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5715 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-07 01:52:30 +00:00
patacongo
a9bb78df4e Correct some assembly language errors in the last checkin 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5714 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-06 20:54:59 +00:00
patacongo
466efbd35c Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-06 19:56:32 +00:00
patacongo
4134862fb2 Move work queue logic from sched/ to libc/wqueue. It is not core logic and will be extended to support user-space work queues 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5711 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-05 18:57:51 +00:00
patacongo
e393fa648a Updates to the LPC1788 SDIO support 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5709 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-05 15:37:50 +00:00
patacongo
6b95b83d47 Open1788 uses SDIO-based SD card (not SPI); clone STM32 SDIO interface to LPC17xx 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5708 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-05 14:46:04 +00:00
patacongo
88e169bcf4 Add LM4F120 pin configuration header file 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5705 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-05 00:31:43 +00:00
patacongo
9ee24b19de LPC1788 updates -- OS test configuration now works 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5704 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-04 18:00:07 +00:00
patacongo
0449f2f22e Bugs reported by Mike Smith fixed; ZKIT-ARM-1769 CAN support from Rashid Fatah 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5703 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-04 14:53:41 +00:00
patacongo
36299b338f Fix for compilation issues reported by Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5702 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-04 00:00:19 +00:00
patacongo
493102b322 Two fixes from Mike Smith: (1) use -m install of --mode in install commands, (2) fix typo in stm32_exti.h introduced with the STM32 F3 port 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5701 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-03 21:41:21 +00:00
patacongo
69939381a5 Add System Control register definitions for the LM4F120 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5700 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-03 21:31:28 +00:00
patacongo
fbdfc2d5ae Minor clean-up - Open1788 and LPC17xx serial 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5699 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-02 21:05:18 +00:00
patacongo
311d30655e Corrections for LPC178x UART baud calculation 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5698 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-02 17:01:08 +00:00
patacongo
8be18c005a More lpc1788 updates 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5697 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-02 14:23:17 +00:00
patacongo
309c3c2ff5 LPC1788 updates from Rommel Marcelo 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5696 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-02 00:59:28 +00:00
patacongo
9d0aa8b44f Handle LM4F GPIO -- fewer ports 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5695 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-02 00:11:43 +00:00
patacongo
03ed16b39f Fix to STM32 F2/F4 DMA driver from Yan T. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5694 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-01 22:15:44 +00:00
patacongo
d7df13c66a Add interrupt vector logic for the LM4F120 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5693 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-01 21:41:29 +00:00
patacongo
860a1e8a48 Add a configuration to begin development of an LM4F120 LaunchPad port 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5692 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-01 19:10:02 +00:00
patacongo
7d20a67179 Fixes to STM32 SPI, USB MSC class driver, and MMC/SD SPI driver from Petteri Aimonen 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5688 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-28 17:34:57 +00:00
patacongo
d0f21192e0 STM32 OTF FS device patches from Petteri Aimonen (patches 0001-0003) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5687 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-28 16:53:16 +00:00
patacongo
be1b67a1a2 Add debug output when memory allocations fail 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5686 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-28 15:31:58 +00:00
patacongo
083d2054e7 Fix error in NUC120 SysTick source clock setting; switch to core clock as SysTick clock source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5684 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-27 23:14:48 +00:00
patacongo
d621681866 Some NuTiny-SDK-NUC120 size reduction; All serial driver vtables should be static const 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5683 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-27 22:24:49 +00:00
patacongo
f239368efa The NuTiny-SDK-NUC120 basic port is complete and functional 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5682 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-27 20:34:57 +00:00
patacongo
75a1f693d1 MIPS stack alignment fix for floating point from Helmut 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5681 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-27 16:31:03 +00:00
patacongo
753dfdba14 Correct some ARMv6-M NVIC addresses 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5680 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-27 16:19:07 +00:00
patacongo
e6298a7a4c Fix NuTiny-SDK-NUC120 LEDs 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5679 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-27 15:16:46 +00:00