Gregory Nutt
|
c56a49e9e0
|
LaunchXL-TMS57004: Add clock frequency definitions to board.h
|
2015-12-23 09:46:17 -06:00 |
|
Gregory Nutt
|
531c290009
|
Refresh a configuration
|
2015-12-22 11:06:20 -06:00 |
|
Gregory Nutt
|
4713346a4d
|
LaunchXL-TMS57004: Add some pinmux selections to board.h
|
2015-12-22 11:06:20 -06:00 |
|
Gregory Nutt
|
7b4a193187
|
Merged in paulpatience/nuttx-boards/nucleo_f303re_adc (pull request #25)
Nucleo F303RE: Add ADC DMA channels
|
2015-12-22 05:42:15 -06:00 |
|
Paul A. Patience
|
e73422e3f0
|
Nucleo F303RE: Add ADC DMA channels
|
2015-12-22 03:46:10 -05:00 |
|
Gregory Nutt
|
1245d7fa1d
|
:Merged in alabsdv/boards/stm32f3_i2c_swd (pull request #24)
Updated stm32f3discovery configuration
|
2015-12-20 20:25:53 -06:00 |
|
Doug Vetter
|
a1b780c000
|
Updated stm32f3discovery configuration
* Added notes about external debugging to README
* Added conditional pin assignments for I2C1 and I2C2 to prevent
apps/system/i2c build failures.
|
2015-12-20 19:52:25 -05:00 |
|
Gregory Nutt
|
188d72d1c3
|
LaunchXL-TMS57004: Add FLASH wait state definitions
|
2015-12-19 16:34:08 -06:00 |
|
Gregory Nutt
|
2bd187a9b0
|
Minor update to some comments
|
2015-12-19 08:11:19 -06:00 |
|
Gregory Nutt
|
37194a068e
|
TMS570: Add PLL setup to board.h header file
|
2015-12-18 18:26:05 -06:00 |
|
Gregory Nutt
|
d6762b0c1d
|
LaunchXL-TMS57004: Must have LOWVECTORS defined in configuration
|
2015-12-18 08:53:02 -06:00 |
|
Gregory Nutt
|
d0aa5500ed
|
Select MEMINIT in TMS570 configurations
|
2015-12-17 12:41:59 -06:00 |
|
Gregory Nutt
|
6fe9844d56
|
LaunchXL-TMS57004: Fix linker script. Still had SAMV71 memory map
|
2015-12-16 14:09:34 -06:00 |
|
Gregory Nutt
|
e8ab94af60
|
LaunchXL-TMS57004: Fix some configuration issues; enable SCI1 in configuration
|
2015-12-16 12:45:35 -06:00 |
|
Gregory Nutt
|
c229f818a2
|
LaunchXL-TMS57004: Correct MCU used on the board
|
2015-12-16 11:29:34 -06:00 |
|
Gregory Nutt
|
3298f824fc
|
LaunchXL-TMS57004: Add enough framework to support a complete build. Mostly just empty files for now
|
2015-12-16 08:57:31 -06:00 |
|
Gregory Nutt
|
08d523d89d
|
LaunchXL-TMS57004: Add build framework for TI LaunchXL-TMS57004. Not much to see yet
|
2015-12-15 17:19:35 -06:00 |
|
Alan Carvalho de Assis
|
bb75d19428
|
STM32F4-Discovery: Add support for the pca9635 LED chip. From Alan Carvalho de Assis
|
2015-12-15 13:58:28 -06:00 |
|
Gregory Nutt
|
b90f5ba7f4
|
Remove CONFIG_DISCRETE_IO from all defconfig files
|
2015-12-15 08:41:10 -06:00 |
|
Gregory Nutt
|
c41449b12a
|
Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU
|
2015-12-14 13:56:56 -06:00 |
|
Gregory Nutt
|
54ea059beb
|
Add new boardctl() command to set OS symbol table
|
2015-12-13 08:13:15 -06:00 |
|
Gregory Nutt
|
2d1f97282d
|
SAMV71-XULT module configuration: Enable procfs
|
2015-12-12 19:00:01 -06:00 |
|
Gregory Nutt
|
8159029638
|
SAMV71-XULT: module configuration. Module cannot link with libc because it has out-of-range function calls
|
2015-12-12 13:59:20 -06:00 |
|
Gregory Nutt
|
d0a1e045a3
|
SAMV71-XULT: Simplify module configuration
|
2015-12-12 12:54:02 -06:00 |
|
Gregory Nutt
|
97f0d7425b
|
SAMV71-XULT: Add another NSH configuration for text kernel modules
|
2015-12-12 09:31:22 -06:00 |
|
Gregory Nutt
|
4d0e98e57d
|
Merged in paulpatience/nuttx-boards/arch_board_custom_dir_relpath (pull request #23)
Add CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH
|
2015-12-08 10:27:47 -06:00 |
|
Paul A. Patience
|
d24fa0b2ea
|
Add CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH
|
2015-12-08 11:24:01 -05:00 |
|
Gregory Nutt
|
e1d8ab37b5
|
Update README files
|
2015-12-08 07:32:47 -06:00 |
|
Gregory Nutt
|
a0e662f769
|
Refresh all configurations that have Telnetd enabled; those configurations now also need the telnet driver
|
2015-12-07 10:01:13 -06:00 |
|
Gregory Nutt
|
5adb77cb51
|
SAME70-Xplained: Updates using Arduino serial (UART3).
|
2015-12-05 16:13:29 -06:00 |
|
Gregory Nutt
|
5480d18026
|
Port logic to enable PCK6 in tickless mode from the samv71-xult to the same70-xplained
|
2015-12-04 12:37:00 -06:00 |
|
Gregory Nutt
|
2e8e851d99
|
SAMV7-XULT: If Tickless mode is selected then enabled PCK6 as a timer/counter clock source
|
2015-12-04 10:53:34 -06:00 |
|
Gregory Nutt
|
1f17ba860a
|
Update some README files
|
2015-12-03 15:36:23 -06:00 |
|
Gregory Nutt
|
734144ad66
|
Update READMEs
|
2015-12-03 09:52:50 -06:00 |
|
Gregory Nutt
|
f04287305d
|
Update README
|
2015-12-02 18:54:17 -06:00 |
|
Gregory Nutt
|
216f762e56
|
Update README
|
2015-12-02 15:54:20 -06:00 |
|
Gregory Nutt
|
4991f94792
|
Update README files
|
2015-12-02 09:22:26 -06:00 |
|
Gregory Nutt
|
99c460a696
|
Upate README files
|
2015-12-02 08:37:42 -06:00 |
|
Gregory Nutt
|
dd482c3f8b
|
New procfs entries must be added BEFORE the procfs is mounted
|
2015-12-02 05:18:10 -06:00 |
|
Gregory Nutt
|
dde6ba85a3
|
STM32F429i Discovery uses CCM procfs and so needs FS_PROCFS_REGISTER=y
|
2015-12-01 15:03:39 -06:00 |
|
Gregory Nutt
|
9a4192d22b
|
Remove CONFIG_NET_PINGADDRCONF. This was a uIP way of assigning IP addresses, but is not standard and not a appropriate feature in general.
|
2015-12-01 07:47:41 -06:00 |
|
Gregory Nutt
|
fba809d7c8
|
Update README files
|
2015-11-30 17:37:01 -06:00 |
|
Gregory Nutt
|
2e78fc7178
|
configs/same70-xplained: Added a network enabled NSH configuration
|
2015-11-30 16:50:40 -06:00 |
|
Gregory Nutt
|
2e3f1327bd
|
configs/same70-xplained/nsh: The NSH configuration now appears to be fully functional
|
2015-11-30 16:05:32 -06:00 |
|
Gregory Nutt
|
1f7df26f24
|
SAME70: Initialization has to be done a little differently because the board has no 32.768KHz crystal installed
|
2015-11-30 15:20:21 -06:00 |
|
Gregory Nutt
|
fbca4d4ecf
|
SAME70-Xplained: Update configuration: Board has only one button
|
2015-11-30 13:10:33 -06:00 |
|
Gregory Nutt
|
5926a09498
|
Update README
|
2015-11-30 13:05:14 -06:00 |
|
Gregory Nutt
|
049616b40d
|
SAME70 Xplained: Refresh configuration, enable PROCFS. Add logic to automatically mount procfs during initialization
|
2015-11-30 08:04:32 -06:00 |
|
Gregory Nutt
|
1216398f62
|
sam: Refresh all configurations: Enable PROCFS and NSH_ARCHINIT in all NSH configurations
|
2015-11-29 13:52:50 -06:00 |
|
Gregory Nutt
|
b9a26bae77
|
Move up_appinit.c to configs/sim/src where it belongs. Add logic to automatically mount the procfs file system if it is enabled.
|
2015-11-29 13:30:12 -06:00 |
|