sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
32,734 Commits 1 Branch 0 Tags 291 MiB
4f17f71245
Commit Graph

28 Commits

Author SHA1 Message Date
Marcin Wyrwas
18ca531b40 Merged in plwm/nuttx/stm32f746g-disco-touchscreen (pull request #701) 
stm32f746g-disco: touchscreen support

* fixed FT5x06 driver to correctly close (previously it unregistered interrupt handler during close)
* added LittlevGL demo for STM32F746G-DISCO

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-08-01 21:31:39 +00:00
Gregory Nutt
500d2c2289 arch/arm/src/lpc11,lpc17,lpc43,stm32,stm32l4: Fix scope of naming. CONFIG_CAN_TSEG1->CONFIG_LPC17_CAN_TSEG, for example. 2018-06-28 15:44:42 -06:00
Gregory Nutt
45cdc3a3d0 arch/arm/src/lpc11,lpc17,stm32,stm32l4: Fix scopy of nameing. CONFIG_CANx_BAUD->CONFIG_LPC17_CANx_BAUD, for example. 2018-06-28 14:47:14 -06:00
Gregory Nutt
8bd9cfe038 Squashed commit of the following: 
arch/arm:  Remove support for CONFIG_ARMV7M_CMNVECTOR.  It is now the only vector support available.  Also remove CONFIG_HAVE_CMNVECTOR.  That no longer signifies anything."
    arch/arm/src/stm32:  This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
 2018-06-20 12:30:37 -06:00
Gregory Nutt
e4922ed9f0 Remove instructures to CD to tools/ before running ./configure.sh 
Squashed commit of the following:

    configs/*/README.txt: Replace each occurrence of './configure.sh' with 'tools/configure.sh'
    configs/*/README.txt:  Remove 'cd ..' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd -' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd tools' before each './configure.sh'
    configs/README.txt:  Remove instruction to CD tools/ before running configure.sh.
 2018-05-09 11:41:46 -06:00
Louis Mayencourt
bd81664b31 configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port) 2018-02-19 14:38:22 -06:00
Gregory Nutt
873de7b480 configs/*/README.txt: Update to the new URL for obtaining the ARM toolchain. 2017-08-13 07:18:19 -06:00
Gregory Nutt
5f31999b75 Trivial fix to spacing 2017-07-27 11:50:59 -06:00
Titus von Boxberg
28eab902d0 No FSMC, only FMC for STM32F7 2017-07-27 18:27:01 +02:00
Titus von Boxberg
006fa75171 corrected typos and inconsistencies for USB OTG configuration 2017-07-18 11:43:53 +02:00
Gregory Nutt
44545781e5 configs/: Remove dangline space at the end of lines in .txt files. 2017-06-28 13:18:41 -06:00
Gregory Nutt
9aac1dd44d configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files. 2017-04-26 10:12:13 -06:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
9ac00a355f Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots. 2017-01-31 09:16:01 -06:00
Gregory Nutt
4742999e45 Remove references to non-existent kostest from README.txt 2016-06-28 14:45:30 -06:00
Gregory Nutt
ac81ecf65b Remove configs/stm32f746g-disco/netnsh. It does not build. Probably a corrupted, hand-editted defconfig file. 2016-06-28 14:43:58 -06:00
Gregory Nutt
1377452394 Refresh all ARM configurations 2016-06-23 15:59:14 -06:00
Gregory Nutt
63b1eb09e6 Centralize definitions associated with CONFIG_DEBUG_CAN 2016-06-15 15:45:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
650ba80ac0 All setenv.sh files updated to use the path to the ARM 4.0 2015q2 toolchain 2015-07-31 08:40:40 -06:00
Gregory Nutt
8451cbc3cd Update README 2015-07-21 15:32:57 -06:00
Gregory Nutt
796cb1e13c STM32F746G-Disco: Add support for a protected build. C++ initialization logic moved to apps/platform where it belongs 2015-07-21 11:16:44 -06:00
Gregory Nutt
03ab4e8c75 Update README.txt file 2015-07-21 07:58:02 -06:00
Gregory Nutt
2e09cf3112 STM32F746-DISCO: Enable the NSH telnet sessions 2015-07-20 10:54:47 -06:00
Gregory Nutt
ba105349a4 STM32F746G-DISCO: Add a network-enabled NSH configuratino for network testing 2015-07-19 14:13:26 -06:00
Gregory Nutt
4cb2464e77 STM32 F7 disco: Enabled I-/D-Cache, DTCM, recallibrate delay loop. Update README.txt 2015-07-19 10:40:32 -06:00
Gregory Nutt
1b341a30d8 STM32 F7: Update configuration variable naming 2015-07-16 19:48:39 -06:00
Gregory Nutt
0850780a03 Add initial support for the STM32 F7 Discovery board 2015-07-16 11:41:40 -06:00