sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
36,720 Commits 1 Branch 0 Tags 291 MiB
4fa26d34d6
Commit Graph

35 Commits

Author SHA1 Message Date
Xiang Xiao
68951e8d72 Remove exra whitespace from files (#189) 
* Remove multiple newlines at the end of files
* Remove the whitespace from the end of lines
 2020-01-31 09:24:49 -06:00
Gregory Nutt
abf6965c24 Squashed commit of the following: 
libs/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    syscall/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    wireless/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    Documentation/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    include/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    drivers/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    sched/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    configs:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/xtensa:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/z80:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/x86:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/renesas and arch/risc-v:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/or1k:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/misoc:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/mips:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/avr:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/arm:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
 2019-04-29 14:52:05 -06:00
Gregory Nutt
b1001b4e50 Update TODO list regarding non-queuing of signal actions; Add comments in code at areas where the issue applies. 2019-02-04 08:35:03 -06:00
Xiang Xiao
2e70eef767 arch/arm/include/armv-7m/irq.h and armv6-m/irq.h: Remove redundant conditioning on CONFIG_BUILD_PROTECTED 2019-01-26 07:04:15 -06:00
Dave Marples
d0cda60442 In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts. 2018-12-03 17:41:59 -06:00
Gregory Nutt
5996d70883 Revise commit 09ccd43d61: That change had the subtle side-effect of unconditionally enabling interrupts in the primask. That may be what we want in most cases, but certainly not all. This does increse the size of the inline function by about 48-bits per instantiation. 2018-08-04 07:37:31 -06:00
Gregory Nutt
09ccd43d61 arch/arm/include/armv7-m, arch/arm/include/armv7-m, arch/arm/include/stm32f7: Add a configuration to enable workaround for r0p1 Errata 837070: Increasing priority usingwrite to BASEPRI does not take effect immediately. 
This update is required to be serialized to the instruction stream meaning that after this update completes, it takes effect immediately and no exceptions of lower priority than the new boosted priority can pre-empt execution.  Because of this erratum, the priority boosting does not take place immediately, allowing the instruction after the MSR to be interrupted by an exception of lower priority than the new boosted priority. This effect is only limited to the next instruction. Subsequent instructions are guaranteed to see the new boosted priority.

This was raised in Bitbucket issue 113 from Vadzim Dambrouski.
 2018-08-02 16:51:58 -06:00
Gregory Nutt
8bd9cfe038 Squashed commit of the following: 
arch/arm:  Remove support for CONFIG_ARMV7M_CMNVECTOR.  It is now the only vector support available.  Also remove CONFIG_HAVE_CMNVECTOR.  That no longer signifies anything."
    arch/arm/src/stm32:  This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
 2018-06-20 12:30:37 -06:00
Gregory Nutt
6230ab01b6 arch/arm/include/armv7-m: Last change requires inclusion of chip.h for definition. 2018-06-06 10:38:51 -06:00
Gregory Nutt
977d41d519 Based on a change recommended by Mark Shulte: 
Signal handlers maybe run with interrupts enabled or disabled, depending on how the task the received the signal was blocked. (i.e.: If sem_wait() is called, then we disable interrupts, then block the currently running task). This could be dangerous, because user code would be running with interrupts disabled.

This change forces interrupts to be enabled in up_sigdeliver() before executing the signal handler calling up_irq_enable() explicitly.  This is safe because, when we return to normal execution, interrupts will be restored to their previous state when the signal handler returns.
 2018-06-06 09:54:30 -06:00
Aleksandr Vyhovanec
472115eda9 ARMv7-M: Add support for the IAR compiler 2016-04-02 08:14:09 -06:00
Gregory Nutt
666cc280f4 Rename irqenable() to up_irq_enable(); rename irqdisable() to up_irq_disable() 2016-02-14 16:54:09 -06:00
Gregory Nutt
83bc1c97c3 Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore() 2016-02-14 16:11:25 -06:00
Gregory Nutt
36726b1bc4 Standardize the width of all comment boxes in header files 2015-10-02 17:42:29 -06:00
Gregory Nutt
cbdafb96d5 Remove unused function setipsr. Cortex-M IPSR register is not writable 2015-09-23 08:38:32 -06:00
Gregory Nutt
29136e51cc Clean up and review of header files for conformance to standards 2015-06-12 19:26:01 -06:00
Gregory Nutt
9bcdf974a0 Add new common lazy FPU state saving option for ARMv7-M. Not yet verified 2015-03-06 08:26:43 -06:00
Gregory Nutt
e11679acf8 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
8dd679e875 ARMv7-A: Add SYSCALL handling logic 2014-08-28 14:52:14 -06:00
Gregory Nutt
9e941f1195 Change bne to bne.n in irqrestore() 2014-05-22 09:01:25 -06:00
Gregory Nutt
36ead78f07 ARMv6-M/ARMv7-M: Correct a register handling error in signal delivery (Kernel build mode only). Noted by Mike Smith. 2014-02-23 08:25:49 -06:00
Gregory Nutt
a8004f9e07 Fix major misthink in Cortex-M0 port: The Cortex-M0 has no BASEPRI register. We have to revert to using the nasty PRIMASK register 2013-04-16 18:00:59 -06:00
patacongo
990c1febf8 Add support for nested system calls 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5752 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-17 16:13:28 +00:00
patacongo
c702374d7b Add support for calling to and returning from signal handlers in in user-mode threads 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5750 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-17 00:40:49 +00:00
patacongo
d256021c41 More MPU-related fixes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5746 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-16 00:34:43 +00:00
patacongo
8159804f9c Fix some ARMv7-M syscall logic 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5736 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-12 21:53:18 +00:00
patacongo
bd1488bdab Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-06 19:56:32 +00:00
patacongo
30d1159097 More logic to use BASEPRI to control interrupts -- still doesn't work 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5547 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-22 14:37:17 +00:00
patacongo
5ab31d456e Add option to use BASEPRI instead of PRIMASK to disable interrupts in all ARMv7-M architectures 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5546 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-22 01:25:40 +00:00
patacongo
5acf2fe3e1 Resync new repository with old repo r5166 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5154 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-17 18:35:37 +00:00
patacongo
c7aa0b0a23 Incoporate (more) new ARMv7-M exception handling logic contributed by Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4414 42af7a65-404d-4744-a932-0658087f49c3
 2012-02-22 18:44:34 +00:00
patacongo
6e2a5140fb Incoporate new ARMv7-M exception handling logic contributed by Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4413 42af7a65-404d-4744-a932-0658087f49c3
 2012-02-22 18:14:18 +00:00
patacongo
599b52fb69 Add support for the Cortex-M4 floating pointing 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4144 42af7a65-404d-4744-a932-0658087f49c3
 2011-12-07 18:58:21 +00:00
patacongo
2dbde8d001 Add storage space for FPU registers in context switching 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4143 42af7a65-404d-4744-a932-0658087f49c3
 2011-12-07 15:36:46 +00:00
patacongo
f93b962f28 Name change: Change Cortex-M3 naming to ARMv7-M naming so support Cortex-M4 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3846 42af7a65-404d-4744-a932-0658087f49c3
 2011-08-05 21:57:49 +00:00