Commit Graph

147 Commits

Author SHA1 Message Date
Gregory Nutt
3042fc5bc0 Missing closing quote in Kconfig file 2014-07-11 16:51:50 -06:00
Gregory Nutt
e91704c432 Minor Kconfig improvements 2014-07-11 16:25:35 -06:00
Gregory Nutt
ab1ab379dd Addition rwbuffer interfaces should not be enabled unless they are needed; if rwbuffer support is enabled, it should not be unconditionally enabled in SMART and FTL 2014-07-11 16:19:17 -06:00
Gregory Nutt
8516551e54 Add an MTD layer that will add read-ahead or write buffering to any MTD driver (incomplete) 2014-07-11 11:20:11 -06:00
Gregory Nutt
b36b29b4c3 SMARTFS: Increase some variables from uint16_t to uint32_t to handle larger device sizes. From Ken Pettit 2014-07-04 07:28:12 -06:00
Gregory Nutt
f881abe2da Fix for a bug that would show up if CONFIG_MTD_BYTE_WRITE was not selected and the SMART sector size was larger than the mtd device's block size (like it would be if using SMARTFS on larger flash devices). From Ken Pettit 2014-07-03 18:14:51 -06:00
Gregory Nutt
f1dcb6674a Extend erase block size to 18-bits in order (decrease block size to 14-bits) to handle parts with large erase blocks. From Kosma Moczek 2014-06-30 07:52:57 -06:00
Gregory Nutt
c48bd737d0 SAM4E-EK: Add a driver for the on-board LCD (not tested on initial check-ing) 2014-05-13 10:38:46 -06:00
Gregory Nutt
ddf151c226 A fix to the last MB85RS1MT patch 2014-05-12 21:42:06 -06:00
Gregory Nutt
e3373aaf39 Add support for Fujitsu MB85RS1MT part. From Charles Ash 2014-05-12 18:43:06 -06:00
Gregory Nutt
020583efa2 drivers/mtd/w25.c: Add support for the 8Mbit W25Q80BV part. From Mark Whitehorn. 2014-04-30 13:31:42 -06:00
Gregory Nutt
d119e4c977 Update TODO list and comments 2014-04-23 13:02:00 -06:00
Gregory Nutt
3a1324741a More trailing whilespace removal 2014-04-13 14:32:20 -06:00
Gregory Nutt
056aed1274 Make sure that there is one space between while and condition 2014-04-12 13:09:48 -06:00
Gregory Nutt
060b84240b Add macro UNUSED to eliminate warnings about variables that are set to unused values 2014-03-30 07:58:58 -06:00
Gregory Nutt
6179cdfb91 Eliminate a warning when debug is off 2014-03-26 17:04:13 -06:00
Gregory Nutt
30c34c07cf Add an MTD driver to wrap another MTD driver and makes is sector size look like 512 bytes 2014-03-24 17:45:45 -06:00
Gregory Nutt
42e06fb503 SAM4E-EK: Add support for the SAM4E-EK AT25 serial flash 2014-03-13 14:07:35 -06:00
Gregory Nutt
91b002a043 Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced 2014-02-10 18:08:49 -06:00
Gregory Nutt
9f46dac1e2 Add option to indicatet that data is retained in SDRAM 2014-01-28 10:42:49 -06:00
Gregory Nutt
49f73c04ae Fix a typo that was cloned to several SAMA5 and MTD files 2013-12-21 09:45:27 -06:00
Gregory Nutt
124bd68c6f Finish A10 Timer register definitions 2013-12-13 11:44:52 -06:00
Gregory Nutt
f97be5131c Various fixes to the recent, big procfs checkin 2013-12-12 11:08:20 -06:00
Gregory Nutt
e4471dc8e0 procfs/: Extenstive architectural changes and enhancements by Ken Pettit 2013-12-12 09:21:55 -06:00
Gregory Nutt
f821e74ebb Move smart.h to include/nuttx/fs/smart.h 2013-12-10 09:38:48 -06:00
Gregory Nutt
ed9756c137 MTD NAND: Check if block number is out of ragne at top of loop, not bottom, to avoid some bogus transfers 2013-12-05 18:19:48 -06:00
Gregory Nutt
422b225401 Cosmetic updates to comments and READMEs 2013-12-04 16:41:45 -06:00
Gregory Nutt
ae01f868b2 SAMA5 NAND: Fix some PMECC setup logic 2013-12-04 11:56:56 -06:00
Gregory Nutt
68ccbc0855 Add drivers/mtd/README.txt 2013-12-04 07:46:10 -06:00
Gregory Nutt
37c5113c94 MTD NAND: Fix an error in the calculation of the page number 2013-12-02 17:21:09 -06:00
Gregory Nutt
7847443f5a MTD NAND: Fix a misplaced endif 2013-12-01 21:06:07 -06:00
Gregory Nutt
c777f90b8a Costmet updates, naming, debug output, README file 2013-12-01 07:39:20 -06:00
Gregory Nutt
1ea447867a SAMA5 NAND: Still debugging 2013-11-28 12:21:33 -06:00
Gregory Nutt
a791b1070b Fix error in SMARTFS partition number reporting 2013-11-28 08:11:13 -06:00
Gregory Nutt
5a18f048ce Add MTD SST25 driver for larger SST25 parts. From Ken Pettit 2013-11-28 08:04:46 -06:00
Gregory Nutt
881c12cad8 Fixes a couple of errors in MTD NAND logic 2013-11-27 15:02:21 -06:00
Gregory Nutt
5fb0062d2d SAMA5 NAND: A few bug fixes for integration. Still lots more to do 2013-11-27 11:04:40 -06:00
Gregory Nutt
4483117a60 SAMA5 NAND: Trivial changes 2013-11-25 14:16:04 -06:00
Gregory Nutt
2be17cd41f SAMA5 NAND: Fix a few race conditions 2013-11-25 13:53:58 -06:00
Gregory Nutt
d1b4f1c466 SAMA5 PMECC: More progress, still not complete 2013-11-24 09:37:59 -06:00
Gregory Nutt
448c8572cd Rethinking some NAND interfaces 2013-11-19 08:50:12 -06:00
Gregory Nutt
d8a3f21a47 Finishes up NAND software ECC logic 2013-11-18 11:42:17 -06:00
Gregory Nutt
3faa880ef1 MTD NAND: Beginning of software ECC logic 2013-11-18 09:43:44 -06:00
Gregory Nutt
22d4eb9cca More NAND stuff 2013-11-17 14:35:57 -06:00
Gregory Nutt
d54832a942 More NAND stuff 2013-11-17 12:22:09 -06:00
Gregory Nutt
0e7a8668a5 Continuing NAND integration 2013-11-17 08:56:30 -06:00
Gregory Nutt
03b9f5a8e6 More NAND logic (still not complete) 2013-11-16 18:26:07 -06:00
Gregory Nutt
d421eb4fd6 Futher NAND development 2013-11-16 13:19:09 -06:00
Gregory Nutt
854e50b48e Further NAND support 2013-11-16 12:22:43 -06:00
Gregory Nutt
7ccbbe07cb Further NAND development 2013-11-16 11:46:35 -06:00