It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
delete the task from the specified task list to reduce time consuming.
In the past, header file paths were generated by the incdir command
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
In host route mode (bridge mode disabled), the d_pktsize of TAP device is not initialized and will be set to CONFIG_NET_ETH_PKTSIZE in netdev_register, while the MTU on host side keeps at 1500. Input packets larger than CONFIG_NET_ETH_PKTSIZE will be dropped because 'IP packet shorter than length in IP header'.
This patch fix this issue by reading MTU from host side and set as d_pktsize, just the same as what is done in bridge mode.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When devif_loopback handles a packet (like a ping targeting at this dev), it does not call the txdone callback, breaking the tx pipeline and may left some packets unhandled, delayed until next transmit on the network interface.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Share one worker between multiple simulated network devices may work most of the time, but sometimes breaks the tx pipeline when sending packets on more than one interface at the same time, and leaves some packets unprocessed in network stack, delayed until next transmit on the network interface. The rx process is likely delayed in packet processing under similar situation, so keep g_avail_work and g_recv_work the same number as interfaces.
dev0 tx1 avail tx1 done
v v
work dev0 tx1 -> dev0 tx1 -> empty -> dev1 tx2 -> dev1 tx3 -> empty
^ ^ ^ ^
dev1 tx2 avail (failed to queue) tx3 avail tx2 done tx3 done
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Support more than one TAP device for debugging (future) NAT and FORWARD, left WPCAP and VPNKit unchanged (force number to 1).
Although we can support at most 31 interfaces, limit to 8 like CONFIG_TUN_NINTERFACES.
Signed-off-by: wengzhe <wengzhe@xiaomi.com>
stderr is a file stream pointer not a function name. Having
it in the renaming list may introduce linking error.
Signed-off-by: gaojiawei <gaojiawei@xiaomi.com>
Situation:
Assume we have 2 cpus, and busy run task0.
CPU0 CPU1
task0 -> task1 task2 -> task0
1. remove task0 form runninglist
2. take task1 as new tcb
3. add task0 to blocklist
4. clear spinlock
4.1 remove task2 form runninglist
4.2 take task0 as new tcb
4.3 add task2 to blocklist
4.4 use svc ISR swith to task0
4.5 crash
5. use svc ISR swith to task1
Fix:
Move clear spinlock to the end of svc ISR
Signed-off-by: ligd <liguiding1@xiaomi.com>
==2117790==ERROR: AddressSanitizer: global-buffer-overflow on address 0x64d9e3c0 at pc 0x59ac4e16 bp 0xcefe8058 sp 0xcefe8048
READ of size 1 at 0x64d9e3c0 thread T0
#0 0x59ac4e15 in up_nputs sim/up_nputs.c:54
#1 0x59a67e4c in syslog_default_write syslog/syslog_channel.c:220
#2 0x59a67823 in syslog_default_write syslog/syslog_write.c:101
#3 0x59a67f10 in syslog_write syslog/syslog_write.c:153
#4 0x59a651c3 in syslogstream_flush syslog/syslog_stream.c:60
#5 0x59a6564e in syslogstream_addchar syslog/syslog_stream.c:104
#6 0x59a6576f in syslogstream_putc syslog/syslog_stream.c:140
#7 0x5989fc4d in vsprintf_internal stdio/lib_libvsprintf.c:952
#8 0x598a1298 in lib_vsprintf stdio/lib_libvsprintf.c:1379
#9 0x59a64ea4 in nx_vsyslog syslog/vsyslog.c:223
#10 0x598a601a in vsyslog syslog/lib_syslog.c:68
#11 0x59b0e3dc in AIOTJS::logPrintf(int, char const*, ...) src/ajs_log.cpp:45
#12 0x59b03d56 in jse_dump_obj src/jse/quickjs/jse_quickjs.cpp:569
#13 0x59b03ea1 in jse_dump_error1(JSContext*, unsigned long long) src/jse/quickjs/jse_quickjs.cpp:602
#14 0x59b03dd9 in jse_dump_error(JSContext*) src/jse/quickjs/jse_quickjs.cpp:591
#15 0x59bed615 in ferry::DomComponent::callHook(char const*) src/framework/dom/component.cpp:65
#16 0x59bfe0ff in ferry::DomComponent::initialize() src/framework/dom/component.cpp:645
#17 0x59bb141d in dom_create_component(JSContext*, unsigned long long, unsigned long long, unsigned long long) (/home/wangbowen/project/central/vela_miot_bes_m0/bin/audio+0x365c41d)
#18 0x59b4c0d3 in AIOTJS::__createComponent(JSContext*, unsigned long long, int, unsigned long long*) (/home/wangbowen/project/central/vela_miot_bes_m0/bin/audio+0x35f70d3)
#19 0x5a56ec17 in js_call_c_function quickjs/quickjs.c:16108
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
rename the UDP_BINDTODEVICE to SO_BINDTODEVICE to follow the linux
style to be compatible with non-UDP protocol binding requirements
Signed-off-by: chao.an <anchao@xiaomi.com>
nuttx_all.lib(up_initialstate.obj) : error LNK2019:
unresolved external symbol '___builtin_frame_addres' referenced in function '_up_getsp'
Return stack pointer from esp
Signed-off-by: chao.an <anchao@xiaomi.com>
type of 'wchar_t' confilt with vcruntime:
C:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.33.31629\include\vcruntime.h(228,28):
error C2371: 'wchar_t': redefinition; different basic types
D:\code\incubator-nuttx\include\sys/types.h(174): message : see decaration of 'wchar_t'
typedef wchar_t as unsigned char to compatible with vcrtuntime
Signed-off-by: chao.an <anchao@xiaomi.com>
GCC __attribute__ is not fully compatible with MSVC, In the MSVC
environment the programmer typically explicitly exports function/class
symbols via the MSVC-specific __declspec(dllexport) modifier.
D:\code\incubator-nuttx\arch\sim\src\sim\up_head.c(107,15):
error C2143: syntax error : missing ')' before '('
[D:\code\n3\incubator-nuttx\vs2022\up_head.vcxproj]
Reference:
https://docs.microsoft.com/en-us/cpp/cpp/dllexport-dllimport?view=msvc-170
Signed-off-by: chao.an <anchao@xiaomi.com>
The commit 664d45dcba updated the
behavior of the framebuffer's putarea callback enabling it to be
used to draw a particular area of the display. Previously, putarea
was only used to draw the entire area of the display. Any different
area was drawn, row by row, by putrun. Also, before checking for
which callback to call, the framebuffer driver adjusted the buffer
reference that was going to be used for calling the driver's callback
to point to the init of the relevant data. After that commit, the
framebuffer's buffer reference passed to the driver's putarea now
contains the data to draw the entire display. Unlike the previous
version of that implementation, only the putrun's callback buffer
was being referenced from the address that contains the data that
actually is being drawn.
This commit fixes it by adjusting the reference for the run buffer
passed to the putrun/putarea callback. It always starts from the
beginning of the relevant data that is actually being drawn. That is
necessary because lcddev (which uses the same LCD display driver
callbacks) actually don't allocate a buffer containing the data to
draw the whole display, so the same putarea implementation of the
LCD drivers would'n be able to work for both lcddev and framebuffer.
Also it's necessary to pass the stride argument to the LCD drivers
in order to enable them to do partial writes by calculating the
buffer offset while sending row-by-row. The stride is equal the
width multiplied by the bytes per pixel (may add some padding)
for framebuffer and is equal to the lenght of the row being drawn
(multiplied by the same BPP) for lcddev.
Why this approach?
Other possible approaches would be:
1) modify lcddev driver to translate received buffer data to a
buffer similar to the framebuffer. That wouldn't be efficient
considering memory allocation.
2) Create a new callback function. While possible, it'd be confusing
to create a different callback to draw the whole screen and another
to draw only an area of the screen. Also, these callbacks would
differ themselves only from the way the buffer is filled.
3) Simply reverting 664d45dcba would
break the usage of the putarea callback to draw an area of the
display, which would also be inefficient.
This approach is based on the Zephyr's implementation of the ST7789
driver: the buffer starts from the beginiing of the region that would
be drawn. The display device driver's putarea implementation should
check if the operation refers to a full screen/full row and implement
(if possible) a single operation to send the data to be drawn more
efficiently.
Finally, this approach requires that the drivers which implement
the putarea callback and expects the entire framebuffer buffer
to be modified. They don't need to calculate where the data begins
as the new buffer represents the data from the address that is
actually being drawn. This includes adjusting the LCD drivers
GC9A01 and ST7789 and the driver for APA102-based LED matrix display.
The "p" format specifier already prepends the pointer address with "0x"
when printing.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
In order to support multiple LCD instances per board, add a pointer from
lcd_planeinfo_s to the lcd_dev_s which it belongs to. Also enhance the
putrun, getrun, putarea and getarea methods to pass through the
lcd_dev_s pointer to the respective device driver.
Port all LCD device drivers to this lcd_planeinfo_s extension.
Enhance SSD1306 driver to support multiple LCDs.
Signed-off-by: Michael Jung <michael.jung@secore.ly>
to generate more information for profile feedback optimization
and remove -lgcov from STDLIBS since gcc/clang will automatically
add the profile help lirary(triggered by -fprofile-generate).
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
glibc 2.34 changed the dynamic linker behavior during the startup
process, which makes the previous "__init_array_start" replacement trick
non-effective.
Now the dynamic linker parses the constructors/destructors information
from the DYNAMIC segment of the program.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
arm: Avoid call k[u]mm_memalign to save the code size
ceva: Correct stack_base_ptr usage(top of stack v.s. bottom of stack)
mips: Correct the stack alignment in up_use_stack
misoc: Correct the stack alignment in up_use_stack
or1k: Correct the stack alignment in up_use_stack
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This commit fixes at least two issues.
* Fix a build with clang on linux
```
/usr/bin/ld: cannot open linker script file nuttx.ld: No such file or directory
clang: error: linker command failed with exit code 1 (use -v to see invocation)
```
* Restore symbol renaming for clang on linux
I guess it actually depends on the linker.
For now, use CONFIG_HOST_MACOS.
This fixed the following crash seen with sim/linux built with clang.
```
#135462 0x0000000000404a81 in nxtask_exithook (tcb=0x48f310 <g_idletcb>, status=1, nonblocking=0 '\000') at task/task_exithook.c:618
#135463 0x0000000000402aed in exit (status=1) at task/exit.c:103
#135464 0x0000000000475833 in host_abort (status=1) at sim/up_hostmisc.c:48
#135465 0x000000000040e6c6 in up_assert (filename=0x47b167 "semaphore/sem_wait.c", lineno=113) at sim/up_assert.c:126
#135466 0x000000000040850b in _assert (filename=0x47b167 "semaphore/sem_wait.c", linenum=113) at assert/lib_assert.c:36
#135467 0x0000000000403a40 in nxsem_wait (sem=0x7fca38b1c2d0) at semaphore/sem_wait.c:113
#135468 0x0000000000403b43 in sem_wait (sem=0x7fca38b1c2d0) at semaphore/sem_wait.c:271
#135469 0x000000000040aad3 in lib_stream_semtake (list=0x7fca38b1c2d0) at stdio/lib_libstream.c:159
#135470 0x000000000040a8e7 in lib_flushall (list=0x7fca38b1c2d0) at stdio/lib_libflushall.c:61
#135471 0x0000000000404c3c in nxtask_flushstreams (tcb=0x48f310 <g_idletcb>) at task/task_exithook.c:520
#135472 0x0000000000404a81 in nxtask_exithook (tcb=0x48f310 <g_idletcb>, status=1, nonblocking=0 '\000') at task/task_exithook.c:618
#135473 0x0000000000402aed in exit (status=1) at task/exit.c:103
#135474 0x0000000000475833 in host_abort (status=1) at sim/up_hostmisc.c:48
#135475 0x000000000040e6c6 in up_assert (filename=0x47b167 "semaphore/sem_wait.c", lineno=113) at sim/up_assert.c:126
#135476 0x000000000040850b in _assert (filename=0x47b167 "semaphore/sem_wait.c", linenum=113) at assert/lib_assert.c:36
#135477 0x0000000000403a40 in nxsem_wait (sem=0x7fca38b1c2d0) at semaphore/sem_wait.c:113
#135478 0x0000000000403b43 in sem_wait (sem=0x7fca38b1c2d0) at semaphore/sem_wait.c:271
#135479 0x000000000040aad3 in lib_stream_semtake (list=0x7fca38b1c2d0) at stdio/lib_libstream.c:159
#135480 0x000000000040a8e7 in lib_flushall (list=0x7fca38b1c2d0) at stdio/lib_libflushall.c:61
#135481 0x0000000000404c3c in nxtask_flushstreams (tcb=0x48f310 <g_idletcb>) at task/task_exithook.c:520
```
## Summary
A lot of linker scripts were listed twice, once for unix, once for windows.
This PR cleans up the logic so they're only listed once.
## Impact
Any opportunity to use a single source of truth and reduce lines of code is a win!
## Testing
CI will test all build
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
and removed two tcp_send_txnotify() calls from tcp_sendfile (they are not needed anymore).
As a result, the TX throughput of both the tcp_send_buffered and tcp_send_unbuffered
is significantly boosted in case of TUN/TAP network device.
For Linux, we rename the section so that they are not invoked.
However, it doesn't work for macOS.
Notes:
* Renaming the sections (as the Linux version does) doesn't work
because the section is looked by its flags, not by its names.
* No convenient tools available to alter the relevant bit in
the section flags.
* The constructors are invoked before the program entry point.
In case of high TX network traffic, netdriver_loop() that reads data from netdev
was invoked via up_idle() only after high TX network traffic had stopped.
That resulted in massive delay and drop of TCP ACK packets and
any other packets from netdev (tun/tap device).
For example, task is blocked by nxsem_wait(sem1), use nxsem_wait(sem2)
in signal handler, and take sem2 successfully, after exit from signal
handler to task, nxsem_wait(sem1) returns OK, but the correct result
should be -EINTR.
Signed-off-by: Zeng Zhaoxiu <zhaoxiu.zeng@gmail.com>
we have many different hostfs implementation now, so it's better
to select the implementation explicitly, just like what we have
done for arm(FS_HOSTFS vs. ARM_SEMIHOSTING_HOSTFS).
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
David Sidrane has submitted the ICLA
Mateusz Szafoni has submitted the ICLA
Sebastien Lorquet has submitted the ICLA
Paul Alexander Patience has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This reverts commit 45672c269d.
Because:
* It's very confusing to have cc as LD.
* I don't see what "-nostartfiles -nodefaultlibs" in LDFLAGS are
supposed to do when we use LD directly. It would be simpler to
remove them from our LDFLAGS.
When SIM_SPI is valid, a specified Linux SPI device ‘spidevN.P’(N is bus number and P is CS number) is attached to nuttx simulator, shown as 'spi0' under /dev. One may type spi command (need SPITOOL valid) in NSH to control the Linux SPI and exchange data, other devices such sensors can use it to debug in simulator on a Ubuntu PC. Note that a USB<>SPI module (e.g. CH341A/B) should be plugged in to achieve Linux SPI ports.
Change-Id: I275b2c2bbf6d14bcdf514c89efb9a2264d69e9a3
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
When use poweroff command,host_abort will be called,but may be make __stack_chk_fail irq, and host_abort be called in PANIC(), so bring infinite loop, in turn it can not exit SIM.
Signed-off-by: buyuer <dingddding@163.com>
