This reverts commit b88a1fd7fd. [1]
Because:
* It casues assertion failures like [2].
* I don't understand what it attempted to fix.
[1]
```
commit b88a1fd7fd
Author: chao.an <anchao@xiaomi.com>
Date: Sat Jul 2 13:17:41 2022 +0800
net/tcp: discard connect reference before free
connect reference should be set to 0 before free
Signed-off-by: chao.an <anchao@xiaomi.com>
```
[2]
```
#0 up_assert (filename=0x5516d0 "tcp/tcp_conn.c", lineno=771) at sim/up_assert.c:75
#1 0x000000000040a4bb in _assert (filename=0x5516d0 "tcp/tcp_conn.c", linenum=771) at assert/lib_assert.c:36
#2 0x000000000042a2ad in tcp_free (conn=0x597fe0 <g_tcp_connections+384>) at tcp/tcp_conn.c:771
#3 0x000000000053bdc2 in tcp_close_disconnect (psock=0x7f58d1abbd80) at tcp/tcp_close.c:331
#4 0x000000000053bc69 in tcp_close (psock=0x7f58d1abbd80) at tcp/tcp_close.c:366
#5 0x000000000052eefe in inet_close (psock=0x7f58d1abbd80) at inet/inet_sockif.c:1689
#6 0x000000000052eb9b in psock_close (psock=0x7f58d1abbd80) at socket/net_close.c:102
#7 0x0000000000440495 in sock_file_close (filep=0x7f58d1b35f40) at socket/socket.c:115
#8 0x000000000043b8b6 in file_close (filep=0x7f58d1b35f40) at vfs/fs_close.c:74
#9 0x000000000043ab22 in nx_close (fd=9) at inode/fs_files.c:544
#10 0x000000000043ab7f in close (fd=9) at inode/fs_files.c:578
```
Retransmit only one the earliest not acknowledged segment
(according to RFC 6298 (5.4)). The issue is the same as it was
in tcp_send_unbuffered.c and tcp_sendfile.c.
Signed-off-by: chao.an <anchao@xiaomi.com>
The time consuming of tcp waving hands(close(2)) will be affected
by network jitter, especially the wireless device cannot receive
the last-ack under worst environment, in this change we move the
tcp close callback into background and invoke the resource free
from workqueue, which will avoid the user application from being
blocked for a long time and unable to return in the call of close
Signed-off-by: chao.an <anchao@xiaomi.com>
since devif_timer has been removed in:
commit 035d925864
Author: zhanghongyu <zhanghongyu@xiaomi.com>
Date: Sun May 29 21:47:28 2022 +0800
devif: remove all devif_timer
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
since the code could map the unsupported work to the
supported one and remove select SCHED_WORKQUEUE from
Kconfig since SCHED_[L|H]PWORK already do the selection
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
When a Netlink response is issued, which a task is currently polling for
on the corresponding AF_NETLINK socket, then the poll call will return
with a ENOENT error. This is due to the fact that the Netlink response
notifier is automatically torn down after the notification.
Fixed by making netlink_notifier_teardown a best-effort function that
does not return a result code.
Signed-off-by: Michael Jung <michael.jung@secore.ly>
According to POSIX the length of the source address of the received
message shall be stored in the object pointed to by the address_len
argument.
This patch fixes two places where this did not happen correctly.
Signed-off-by: Michael Jung <michael.jung@secore.ly>
This fixes a regression caused by the following commit,
which prevents the file flag from being updated.
```
commit 28860b5242
Author: chao.an <anchao@xiaomi.com>
Date: Sat Mar 19 14:47:37 2022 +0800
net/netdev: fix switch case missing break
Signed-off-by: chao.an <anchao@xiaomi.com>
```
Note: some applications like mbedtls uses F_GETFL to confirm
the nonblock-ness of the socket. This is critical for such
applications.
==1598322==ERROR: AddressSanitizer: heap-use-after-free on address 0xf514f8a8 at pc 0x58ac3898 bp 0xd0b4d488 sp 0xd0b4d478
READ of size 4 at 0xf514f8a8 thread T0
#0 0x58ac3897 in rpmsg_socket_pollnotify rpmsg/rpmsg_sockif.c:211
#1 0x58ac512f in rpmsg_socket_ept_cb rpmsg/rpmsg_sockif.c:312
#2 0x5787881c in rpmsg_virtio_rx_callback open-amp/lib/rpmsg/rpmsg_virtio.c:331
#3 0x57886a67 in virtqueue_notification open-amp/lib/virtio/virtqueue.c:623
#4 0x5786fb89 in rproc_virtio_notified open-amp/lib/remoteproc/remoteproc_virtio.c:340
#5 0x5786bde3 in remoteproc_get_notification open-amp/lib/remoteproc/remoteproc.c:985
#6 0x57755a50 in rptun_worker rptun/rptun.c:303
#7 0x57755e51 in rptun_thread rptun/rptun.c:352
#8 0x57730d4a in nxtask_start task/task_start.c:128
#9 0xdeadbeee (/memfd:pulseaudio (deleted)+0x15dbeee)
Signed-off-by: ligd <liguiding1@xiaomi.com>
reference:
https: //man7.org/linux/man-pages/man2/accept.2.html
1. default set block mode if accept() a new socket
2. local_socket support FIONBIO
Signed-off-by: ligd <liguiding1@xiaomi.com>
Fix this compile-time warning:
rpmsg/rpmsg_sockif.c:381:24: warning: format '%d' expects argument of type 'int', but argument 3 has type 'ssize_t' {aka 'long int'} [-Wformat=]
381 | nerr("circbuf_write overflow, %d, %d\n", written, len);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~
| |
| ssize_t {aka long int}
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
newsock = accept(server, &addr, &addrlen);
replace the socket flags from newsock to server to ensure that
the nonblock flags is handled correctly
Signed-off-by: chao.an <anchao@xiaomi.com>
Error: module/mod_insmod.c:203:3: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
203 | strncpy(modp->modname, modname, MODLIB_NAMEMAX);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wqueue/kwork_thread.c: In function 'work_start_lowpri':
Error: wqueue/kwork_thread.c:212:22: error: '%lx' directive output may be truncated writing between 1 and 16 bytes into a region of size 14 [-Werror=format-truncation=]
212 | snprintf(args, 16, "0x%" PRIxPTR, (uintptr_t)wqueue);
local/local_sockif.c: In function 'local_getsockname':
Error: local/local_sockif.c:392:11: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
392 | strncpy(unaddr->sun_path, conn->lc_path, namelen);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
chip/esp32_wifi_utils.c: In function 'esp_wifi_scan_event_parse':
Error: chip/esp32_wifi_utils.c:373:37: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
memset(ap_list_buffer, 0x0, sizeof(ap_list_buffer));
^
stdio/lib_fputs.c: In function 'fputs':
Error: stdio/lib_fputs.c:99:9: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
Error: stdio/lib_fputs.c:99:27: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
stdio/lib_vfprintf.c: In function 'vfprintf':
Error: stdio/lib_vfprintf.c:40:6: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (stream)
^
string/lib_strdup.c: In function 'strdup':
Error: string/lib_strdup.c:39:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strndup.c: In function 'strndup':
Error: string/lib_strndup.c:56:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strpbrk.c: In function 'strpbrk':
Error: string/lib_strpbrk.c:39:7: error: nonnull argument 'str' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~
Error: string/lib_strpbrk.c:39:15: error: nonnull argument 'charset' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~~~~~
string/lib_strrchr.c: In function 'strrchr':
Error: string/lib_strrchr.c:40:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
Error: time/lib_asctimer.c:73:50: error: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 12 [-Werror=format-truncation=]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~
time/lib_asctimer.c:73:21: note: directive argument in the range [-2147481748, 2147483647]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
time/lib_asctimer.c:73:3: note: 'snprintf' output between 17 and 68 bytes into a destination of size 26
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
g_wday_name[tp->tm_wday], g_mon_name[tp->tm_mon],
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tp->tm_mday, tp->tm_hour, tp->tm_min, tp->tm_sec,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1900 + tp->tm_year);
~~~~~~~~~~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
socket/setsockopt.c: In function ‘psock_socketlevel_option’:
socket/setsockopt.c:168:38: warning: declaration of ‘conn’ shadows a previous local [-Wshadow]
168 | FAR struct tcp_conn_s *conn;
| ^~~~
Signed-off-by: chao.an <anchao@xiaomi.com>
1. remove the unnecessary interfaces tcp_close_monitor()
socket flags(s_flags) is a global state for net connection
remove the incorrect update for stop monitor
2. do not start the tcp monitor from duplicated psock
the tcp monitor has already registered in connect callback
------------------------------------------------------------
This patch also fix the telnet issue reported by:
https://github.com/apache/incubator-nuttx/pull/5434#issuecomment-1035600651
the orignal session fd is closed after dup, the connect state
has incorrectly migrated to close:
drivers/net/telnet.c:
977 static int telnet_session(FAR struct telnet_session_s *session)
...
1031 ret = psock_dup2(psock, &priv->td_psock);
...
1082 nx_close(session->ts_sd);
Signed-off-by: chao.an <anchao@xiaomi.com>
error:
--------------------------------------
netdev/netdev_lladdrsize.c: In function ‘netdev_lladdrsize’:
netdev/netdev_lladdrsize.c:148:7: error: duplicate case value
148 | case NET_LL_BLUETOOTH:
| ^~~~
netdev/netdev_lladdrsize.c:119:7: note: previously used here
119 | case NET_LL_BLUETOOTH:
| ^~~~
BLUETOOTH_HDRLEN has been removed by:
---------------------------------
|commit aae0d92598
|Author: Gregory Nutt <gnutt@nuttx.org>
|Date: Sun Apr 1 15:21:58 2018 -0600
|
|wireless/bluetooth and net/bluetooth:
|
|Clean up some garbage left in Kconfig file that broke 'make menuconfig'.
|Clean up some craziness with Bluetooth frame length definitions.
Signed-off-by: chao.an <anchao@xiaomi.com>
sixlowpan/sixlowpan_input.c: In function ‘sixlowpan_dispatch’:
sixlowpan/sixlowpan_input.c:629:3: warning: implicit declaration of function ‘pkt_input’;
did you mean ‘ipv6_input’? [-Wimplicit-function-declaration]
629 | pkt_input(&radio->r_dev);
| ^~~~~~~~~
| ipv6_input
Signed-off-by: chao.an <anchao@xiaomi.com>
and removed two tcp_send_txnotify() calls from tcp_sendfile (they are not needed anymore).
As a result, the TX throughput of both the tcp_send_buffered and tcp_send_unbuffered
is significantly boosted in case of TUN/TAP network device.
According to RFC 5681 (3.2) the TCP Fast Retransmit algorithm should start
if the threshold of 3 duplicate ACKs is reached.
Thus the threshold should be a constant, not an integer option.
(conn->sndseq was updated in multiple places that was unreasonable and complicated).
This optimization is the same as it was done for tcp_send_unbuffered.
Wrong unackseq calculation locked conn->tx_unacked at non-zero values
even if all ACKs were received.
This issue is the same as it was with tcp_send_unbuffered.
Do not use pvconn argument to get the TCP connection pointer because pvconn is
normally NULL for some events like NETDEV_DOWN. Instead, the TCP connection pointer
can be reliably obtained from the corresponding TCP socket.
Both the snd_ackcb and snd_datacb callbacks were created and destroyed right after sending every packet.
Whenever TCP_REXMIT event occurred due to TCP send timeout, TCP_REXMIT was ignored because
snd_ackcb callback had been destroyed by the time.
The issue is fixed as follows:
- both the snd_ackcb and snd_datacb callbacks are combined into one snd_cb callback
(the same way as in tcp_send_unbuffered.c).
- the snd_cb callback lives until all requested data (via sendfile) is sent,
including all ACKs and possible retransmissions.
As a positive side effect of the code optimization / fix, sendfile TCP payload throughput is increased.
tcp_sendfile() reads data directly from a file and does not use NET_TCP_WRITE_BUFFERS data flow
even if CONFIG_NET_TCP_WRITE_BUFFERS option is enabled.
Despite this, tcp_sendfile relied on NET_TCP_WRITE_BUFFERS specific flow control variables that
were idle during sendfile operation. Thus it was a total inconsistency.
E.g. because of the issue, TCP socket used by sendfile() operation never issued
FIN packet on close() command, and the TCP connection hung up.
As a result of the fix, simultaneously enabled CONFIG_NET_TCP_WRITE_BUFFERS and
CONFIG_NET_SENDFILE options can coexist.
In file included from usrsock/usrsock_bind.c:32:
usrsock/usrsock_bind.c: In function ‘usrsock_bind’:
usrsock/usrsock_bind.c:183:13: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
183 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
| |
| ssize_t {aka long int}
usrsock/usrsock_bind.c:183:54: note: format string is defined here
183 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ~^
| |
| int
| %ld
CC: usrsock/usrsock_connect.c
CC: usrsock/usrsock_dev.c
In file included from usrsock/usrsock_dev.c:37:
usrsock/usrsock_dev.c: In function ‘usrsockdev_handle_event’:
usrsock/usrsock_dev.c:488:19: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t’ {aka ‘long unsigned int’} [-Wformat=]
488 | nwarn("message too short, %d < %d.\n", len, sizeof(*hdr));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
| |
| size_t {aka long unsigned int}
usrsock/usrsock_dev.c:488:40: note: format string is defined here
488 | nwarn("message too short, %d < %d.\n", len, sizeof(*hdr));
| ~^
| |
| int
| %ld
In file included from usrsock/usrsock_dev.c:37:
usrsock/usrsock_dev.c:488:19: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘long unsigned int’ [-Wformat=]
488 | nwarn("message too short, %d < %d.\n", len, sizeof(*hdr));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~
| |
| long unsigned int
usrsock/usrsock_dev.c:488:45: note: format string is defined here
488 | nwarn("message too short, %d < %d.\n", len, sizeof(*hdr));
| ~^
| |
| int
| %ld
In file included from usrsock/usrsock_dev.c:37:
usrsock/usrsock_dev.c: In function ‘usrsockdev_handle_datareq_response’:
usrsock/usrsock_dev.c:657:13: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ {aka ‘long unsigned int’} [-Wformat=]
657 | nwarn("%dth buffer not large enough (need: %d, have: %d).\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
......
660 | conn->resp.datain.iov[iovpos].iov_len);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| size_t {aka long unsigned int}
usrsock/usrsock_dev.c:657:61: note: format string is defined here
657 | nwarn("%dth buffer not large enough (need: %d, have: %d).\n",
| ~^
| |
| int
| %ld
In file included from usrsock/usrsock_dev.c:37:
usrsock/usrsock_dev.c:678:17: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ {aka ‘long unsigned int’} [-Wformat=]
678 | nwarn("%dth buffer not large enough "
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
......
682 | conn->resp.datain.iov[iovpos].iov_len);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| size_t {aka long unsigned int}
usrsock/usrsock_dev.c:679:45: note: format string is defined here
679 | "(need: %" PRId32 ", have: %d).\n",
| ~^
| |
| int
| %ld
In file included from usrsock/usrsock_dev.c:37:
usrsock/usrsock_dev.c: In function ‘usrsockdev_handle_req_response’:
usrsock/usrsock_dev.c:745:13: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t’ {aka ‘long unsigned int’} [-Wformat=]
745 | nwarn("message too short, %d < %d.\n", len, hdrlen);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
| |
| size_t {aka long unsigned int}
usrsock/usrsock_dev.c:745:34: note: format string is defined here
745 | nwarn("message too short, %d < %d.\n", len, hdrlen);
| ~^
| |
| int
| %ld
In file included from usrsock/usrsock_dev.c:37:
usrsock/usrsock_dev.c: In function ‘usrsockdev_write’:
usrsock/usrsock_dev.c:858:17: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t’ {aka ‘long unsigned int’} [-Wformat=]
858 | nwarn("message too short, %d < %d.\n", len,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
| |
| size_t {aka long unsigned int}
usrsock/usrsock_dev.c:858:38: note: format string is defined here
858 | nwarn("message too short, %d < %d.\n", len,
| ~^
| |
| int
| %ld
In file included from usrsock/usrsock_dev.c:37:
usrsock/usrsock_dev.c:858:17: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘long unsigned int’ [-Wformat=]
858 | nwarn("message too short, %d < %d.\n", len,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
859 | sizeof(struct usrsock_message_common_s));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| long unsigned int
usrsock/usrsock_dev.c:858:43: note: format string is defined here
858 | nwarn("message too short, %d < %d.\n", len,
| ~^
| |
| int
| %ld
CC: usrsock/usrsock_getpeername.c
In file included from usrsock/usrsock_getpeername.c:32:
usrsock/usrsock_getpeername.c: In function ‘usrsock_getpeername’:
usrsock/usrsock_getpeername.c:190:13: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
190 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
| |
| ssize_t {aka long int}
usrsock/usrsock_getpeername.c:190:54: note: format string is defined here
190 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ~^
| |
| int
| %ld
CC: usrsock/usrsock_event.c
CC: usrsock/usrsock_getsockname.c
In file included from usrsock/usrsock_getsockname.c:32:
usrsock/usrsock_getsockname.c: In function ‘usrsock_getsockname’:
usrsock/usrsock_getsockname.c:190:13: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
190 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
| |
| ssize_t {aka long int}
usrsock/usrsock_getsockname.c:190:54: note: format string is defined here
190 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ~^
| |
| int
| %ld
CC: usrsock/usrsock_getsockopt.c
CC: usrsock/usrsock_poll.c
CC: usrsock/usrsock_recvmsg.c
In file included from usrsock/usrsock_recvmsg.c:32:
usrsock/usrsock_recvmsg.c: In function ‘usrsock_recvmsg’:
usrsock/usrsock_recvmsg.c:321:21: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
321 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
| |
| ssize_t {aka long int}
usrsock/usrsock_recvmsg.c:321:62: note: format string is defined here
321 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ~^
| |
| int
| %ld
In file included from usrsock/usrsock_recvmsg.c:32:
usrsock/usrsock_recvmsg.c:343:24: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
343 | nerr("net_timedwait errno: %d\n", ret);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
| |
| ssize_t {aka long int}
usrsock/usrsock_recvmsg.c:343:47: note: format string is defined here
343 | nerr("net_timedwait errno: %d\n", ret);
| ~^
| |
| int
| %ld
In file included from usrsock/usrsock_recvmsg.c:32:
usrsock/usrsock_recvmsg.c:384:17: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
384 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
| |
| ssize_t {aka long int}
usrsock/usrsock_recvmsg.c:384:58: note: format string is defined here
384 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ~^
| |
| int
| %ld
CC: usrsock/usrsock_sendmsg.c
In file included from usrsock/usrsock_sendmsg.c:32:
usrsock/usrsock_sendmsg.c: In function ‘usrsock_sendmsg’:
usrsock/usrsock_sendmsg.c:302:21: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
302 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
| |
| ssize_t {aka long int}
usrsock/usrsock_sendmsg.c:302:62: note: format string is defined here
302 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ~^
| |
| int
| %ld
In file included from usrsock/usrsock_sendmsg.c:32:
usrsock/usrsock_sendmsg.c:324:24: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
324 | nerr("net_timedwait errno: %d\n", ret);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
| |
| ssize_t {aka long int}
usrsock/usrsock_sendmsg.c:324:47: note: format string is defined here
324 | nerr("net_timedwait errno: %d\n", ret);
| ~^
| |
| int
| %ld
In file included from usrsock/usrsock_sendmsg.c:32:
usrsock/usrsock_sendmsg.c:364:17: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
364 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
| |
| ssize_t {aka long int}
usrsock/usrsock_sendmsg.c:364:58: note: format string is defined here
364 | nwarn("usrsock_setup_request_callback failed: %d\n", ret);
| ~^
| |
| int
| %ld
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
add config CONFIG_NET_ALLOC_CONNS to support allocate connect.
Use this feature if the number of connections can not be determined at
compile time. When enabled the stack will be compiled without the static
pre-allocate connection list and all connection instances will be dynamically
allocated from heap at run time.
Signed-off-by: chao.an <anchao@xiaomi.com>
commit 3b69d09c80 corrected the
unreachable handling for net/udp/icmp but introduced an unaligned store.
This splits the uint32_t data field into a two element uint16_t data
field to avoid the unaligned store.
Wrong unackseq calculation locked conn->tx_unacked at non-zero values
even if all ACKs were received. Thus unbuffered psock_tcp_send() never completed.
If the remote TCP receiver advertised TCP window size greater than 64 KB
and TCP ACK packets returned to the NuttX TCP sender with a significant delay,
tx_unacked variable overflowed and further TCP send stalled forever
(until TCP re-connection).
If the udp socket not connected, it is possible to have
multi-different destination address in each iob entry,
update the remote address every time to avoid sent to the
incorrect destination.
Signed-off-by: chao.an <anchao@xiaomi.com>