Gregory Nutt
5356e3d747
Since I can't (yet) get rid of the sanity checks in config.h, I suppose I should at least update the checks.
2016-05-11 11:07:00 -06:00
Gregory Nutt
b77672a049
Backout d5be40be5f
. This change is logically correct but unmasks a lot of issues. Reverted for now.
2016-05-11 10:25:06 -06:00
Gregory Nutt
cf489a6083
Fix a typo in the last commit
2016-05-11 10:06:12 -06:00
Gregory Nutt
ef6edb6094
tools/mkconfig.c: Go further... remove all autogenerated sanity checks from the config.h header file
2016-05-11 10:10:14 -06:00
Gregory Nutt
d5be40be5f
Remove CONFIG_FS_READABLE/WRITABLE logic from tools/mkconfig.c. This logic has been replaced with proper logic in the Kconfig files, it is out of date and an ongoing maintenance problem, and it shoulw not be necessary.
2016-05-11 10:01:43 -06:00
Gregory Nutt
a2a6c0b9a5
Improve some Kconfig help comments
2016-05-11 09:54:33 -06:00
Gregory Nutt
60382e7dcf
fs/Kconfig: Allow CONFIG_FS_WRITABLE to be manually selected
2016-05-11 09:52:32 -06:00
Frank Benkert
9eeb8634fc
Improve the CAN error reporting by also report internal device driver errors.
2016-05-11 07:10:17 -06:00
Sebastien Lorquet
3c594b5ba1
Allows the use of tmpfs when no block driver is available. This is correctly done to define NONBDFS but below the structure is not where it should be.
2016-05-11 06:48:30 -06:00
Gregory Nutt
b096ea077f
Fix some typos in the ChangeLog
2016-05-10 16:40:47 -06:00
Gregory Nutt
e523c93391
Several Makefiles: Add .PHONY definitions to prevent 'clean up to date' message weirdness.
2016-05-10 15:44:06 -06:00
Gregory Nutt
88b79d305f
Update ChangeLog
2016-05-10 11:14:27 -06:00
Sebastien Lorquet
f4fa4799f7
Add a driver for SST26F spi/qspi flash devices (SPI mode only)
2016-05-10 11:09:15 -06:00
Gregory Nutt
f69b7d41db
Merged in young-mu/nuttx/developing (pull request #15 )
...
Fix a bug of GPIO falling-edge interrupt for tiva
2016-05-08 01:40:56 -06:00
Gregory Nutt
5e9b1c615f
Merged in paulpatience/nuttx/userleds (pull request #13 )
...
userleds: Don't select ARCH_LEDS with BOARD_CUSTOM_LEDS, otherwise we can't use the board_userled* functions
2016-05-08 01:37:31 -06:00
Gregory Nutt
5c1c5079ea
Cosmetic changes from review of last PR
2016-05-08 01:40:31 -06:00
Gregory Nutt
0143b3869a
Merged in ziggurat29/nuttx/stm32l4_update_rtc_impl (pull request #14 )
...
Stm32l4_update_rtc_impl
2016-05-08 01:24:09 -06:00
Young
863db15b56
Fix a bug of GPIO falling-edge interrupt for tiva
2016-05-08 13:54:51 +08:00
ziggurat29
523591736f
trivial; enable the 'alarms' example app in the STL32L4-disco config, since it is now working
2016-05-07 12:24:15 -05:00
ziggurat29
1e5910a99d
update nucleo l476 config and code to support the RTC and the alarms functionality
2016-05-07 12:03:18 -05:00
ziggurat29
48fc8b9dd7
problem with resetting backup domain clears clocking options set up before in *rcc.c
...
use INITS flag to avoid magic reg value to detect power up reset state of rtc
correct a problem clearing interrupt flags (they weren't) which prevented an alarm from ever being used more than once per reset cycle
2016-05-07 11:35:08 -05:00
Gregory Nutt
6d03f132a1
Fix some typos in ChangeLog
2016-05-06 04:56:25 -06:00
Gregory Nutt
78b10bdf0e
tools/export.sh: If MAKE not defined use 'which make'. Update README from last change.
2016-05-06 04:49:25 -06:00
Gregory Nutt
443bf7fc93
Update ChangeLog
2016-05-06 04:47:35 -06:00
Stefan Kolb
da1fc98a51
Fix a copy and paste error concerning the CAN driver. In the file sam_matrix.h the define SAM_MATRIX_CAN0_OFFSET is set to the wrong value.
...
Error is only triggered if the global variable g_mcan0_msgram is located in RAM at an address beyond 0x20400000 + 0x0000ffff. In this case all send CAN messages have the length zero and the CAN-ID is zero as well.
2016-05-06 04:02:28 -06:00
Gregory Nutt
050f544782
Fix typo in variable name in serial BREAK logic. Review other serial implementations for similar naming problems.
2016-05-05 11:30:47 -06:00
ziggurat29
4e57c36a8c
when setting an alarm, ensure that the respective alarm triggered flag is reset, because the alarms are edge-triggered interrupts
2016-05-05 11:47:58 -05:00
ziggurat29
0d659de226
fix nasty bug in ISR handler, where interrupt was not properly acknowleged (write to CR instead of ISR, as intended). Also, minor, set the LSI prescaler values more appropriately (though not critical since LSI is so low precision anyway).
2016-05-05 11:39:19 -05:00
Paul A. Patience
dfff78d7ab
userleds: Don't select ARCH_LEDS with BOARD_CUSTOM_LEDS, otherwise we can't use the board_userled* functions
2016-05-05 12:29:43 -04:00
ziggurat29
e0371de24d
correct the RTC_ALRMR_ENABLE value, it needs to ignore the date/dow component since that is not set. Also, the prescaler value for HSE (which presumes 1 MHz, anyway) had transposed digits.
2016-05-05 11:28:41 -05:00
ziggurat29
67b1f89159
address thread safety in lower half driver with a driver mutex acquired/released in public api
2016-05-05 11:22:09 -05:00
ziggurat29
273680a6e9
update RTC implementation to include the various alarm related stuff recently added to STM32 arch
2016-05-05 11:16:00 -05:00
Gregory Nutt
f4ac5f38ce
Merge branch 'master' of https://bitbucket.org/nuttx/nuttx
2016-05-05 03:41:13 -06:00
David Sidrane
aecc033131
Pass toplevel make to the script to allow -j greater than 1
2016-05-05 03:40:16 -06:00
Gregory Nutt
c31ec6bdad
Merged in paulpatience/nuttx/uavcan (pull request #12 )
...
UAVCAN: Update version
2016-05-05 03:23:26 -06:00
Gregory Nutt
331e98684d
Merged in ziggurat29/nuttx/stm32l4_uid (pull request #11 )
...
add unique id function to arch, modded board to support unique id boardctl
2016-05-05 03:22:25 -06:00
Paul A. Patience
e6e2552a12
UAVCAN: Update version
2016-05-03 17:18:57 -04:00
ziggurat29
dedcbeba2e
add unique id function to arch, modded board to support unique id boardctl
2016-05-03 11:09:23 -05:00
ziggurat29
4072d4b1b5
Merged nuttx/nuttx into master
2016-05-01 08:12:53 -05:00
Gregory Nutt
a95e426d35
Costmetic changes from last PR
2016-04-30 09:04:38 -06:00
Gregory Nutt
696ea25c75
Merged in ziggurat29/nuttx/extended_clock_work (pull request #10 )
...
support for HSE and MSI clock sources; prelude to USB
2016-04-30 08:49:49 -06:00
Gregory Nutt
8d92669404
Merged in ziggurat29/nuttx/mem_rgn_sanity (pull request #9 )
...
booboo in config sanity check; wasn't preventing insanity
2016-04-30 08:46:42 -06:00
ziggurat29
2fe0565437
added support for HSE and MSI clocks, and auto trim of MSI to LSE (needed for USB).
2016-04-29 22:13:32 -05:00
ziggurat29
31870b22f5
booboo in config sanity check; wasn't preventing insanity
2016-04-29 07:29:17 -05:00
Gregory Nutt
972181697a
fs_mount.c edited online with Bitbucket. Fix problem noted by David Sidrane.
2016-04-29 07:11:42 +00:00
ziggurat29
b3ba0858f1
Merged nuttx/nuttx into master
2016-04-28 07:29:57 -05:00
Gregory Nutt
61fbef5727
Costmetic changes from review or PR
2016-04-28 02:39:27 -06:00
Gregory Nutt
af9733b1e6
Merged in ziggurat29/nuttx/stm32l4_memmap_boardctl (pull request #8 )
...
stm32l4-disco boardctls for qspi memmap; bugs found along the way
2016-04-28 02:19:33 -06:00
Gregory Nutt
ecba6ad0db
fs_procfsproc.c edited online with Bitbucket. Fix problem introduced in last patch
2016-04-28 08:04:38 +00:00
ziggurat29
97ea667a7a
refresh defconfig
2016-04-27 19:51:49 -05:00