sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
33,455 Commits 1 Branch 0 Tags
Commit Graph

70 Commits

Author SHA1 Message Date
Eduard Niesner
b905888d2c arch/arm/src/stm32f7: Ported the QEncoder from F4 to F7 2018-11-19 07:51:41 -06:00
Gregory Nutt
5433c9f6d1 Revert "arch/arm/src/stm32, stm32f7, stm32l4 Kconfig files: The option to select the STM32 RTC should not be available if the external RTC option is selected." 
While this is a good idea and a proper thing to do, it also creates a circular dependency and errors during configuration.  RTC depends on STM32_RTC which depends on RTC_EXTERNAL with depends on RTC.  No can do.

This reverts commit 714e8c1f9e64e72f29934d86f33c5da9fb88ecd4.
 2018-08-08 12:51:40 -06:00
Gregory Nutt
714e8c1f9e arch/arm/src/stm32, stm32f7, stm32l4 Kconfig files: The option to select the STM32 RTC should not be available if the external RTC option is selected. 2018-08-08 12:49:01 -06:00
Gregory Nutt
8d68d9ca43 arch/arm/src/stm32, stm32f7, stm32l4, and related defconfig files: The STM32 RTC driver was being selected by the global CONFIG_RTC option. That is in correct. For example, if you want to disabled the STM32 RTC and use an external RTC you cannot because the external RTC also depends on the global CONFIG_RTC. The solution is to add a new CONFIG_STM32xx_RTC configuration option the permits to you select or deselect the STM32 RTC but still be able to selecte the external RTC. 2018-08-08 12:42:04 -06:00
Gregory Nutt
4e5cf1229c drivers/mmcsd/Kconfig: three configuration settings were within ifdef/endif and led to warning: xxx selects xxxx which has unmet direct dependencies. Fix by moving settings to drivers/Kconfig and outside of the ifdef-endif. Also renamed CONFIG_SDIO_PREFLIGHT to CONFIG_ARCH_HAVE_SDIO_PREFLIGHT to follow naming of similar hidden architecture capability configurations. 2018-08-05 17:58:17 -06:00
Gregory Nutt
c2267a57a0 Kconfig files: Fix several errors noted by Alex Denisov in Bitbucket issue 115. 2018-08-05 10:48:02 -06:00
Gregory Nutt
0c093f800d arch/arm/src/stm32f7: Port Bob Feritich's change (2c699d781279d899cffd0446d4073a9a6ea3fa48) to SDMMC2 and to all other STM32F7 architectures. Also add a conifiguration option to automatically enable I/O compensation. 2018-07-15 16:17:41 -06:00
David Sidrane
fbe5f56dd5 Merged in david_s5/nuttx/master_singlewire (pull request #679) 
Added Single Wire Kconfig knob

* stm32f0:Added Kconfig knob for STM32F0_USART_SINGLEWIRE

* stm32f7:Added Kconfig knob for STM32F7_USART_SINGLEWIRE

* stm32l4:Corrected comment in Kconfig STM32L4_USART_SINGLEWIRE

* stm32:Added Kconfig knob for STM32_USART_SINGLEWIRE

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-07-12 19:30:43 +00:00
Ramtin Amin
f39c611d64 arch/arm/src/stm32f7/stm32_sdmmc.c: Add SDIO coard support. 2018-07-05 07:31:41 -06:00
Gregory Nutt
576b8b1841 stm32, stm32f0, stm32f7, stm32h7, stm32l4: Fix another duplicated configuration variable name: CONFIG_SERIAL_DISABLE_REORDERING. 2018-06-30 09:43:51 -06:00
Gregory Nutt
f24f523e4e arch/arm/src/imxrt,stm32,stm32f0,stm32f7,stm32l4: Fix scope of naming. CONFIG_PM_SERIAL_ACTIVITY->CONFIG_STM32_PM_SERIAL_ACTIVITY, for example. 2018-06-28 16:18:15 -06:00
Gregory Nutt
7dec38b18f drivers/Kconfig: Global configuration variable CONFIG_FB_TRANSPARENCY is only defined in architecture-specific Kconfig files and then multiple times. Add the single global definition in drivers/Kconfig. arch/arm/src/stm32, stm32f7, and same5: Rename the architecture-specific variables appropriately. Selecting the architecture-specific version will also select the global version. 2018-06-28 12:31:51 -06:00
Gregory Nutt
ba53219821 drivers/Kconfig: Global configuration variable CONFIG_FB_CMAP is only defined in architecture-specific Kconfig files and then multiple times. Add the single global definition in drivers/Kconfig. arch/arm/src/stm32 and stm32f7: Rename the architecture-specific variables appropriately. Selecting the architecture-specific version will also select the global version. 2018-06-28 12:01:55 -06:00
Gregory Nutt
691470c1cd arch/arm/src/stm32,stm32l4,stm32f7: Fix duplicated configuration options. All should be unique. 2018-06-27 10:20:14 -06:00
Juha Niskanen
c1518ecd26 arch/arm/src/stm32f7: Port input capture from stm32 2018-06-21 05:58:31 -06:00
Gregory Nutt
6dcce0430c This change ports in Marco Krahl's STM32F4 framebuffer overlays for the LTDC and DMA2D into the STM32F7. That driver was same as the STM32F4 driver. I am unable to verify the update because I do not have the STM32F76x hardware. So this commit very likely breaks the LTDC/DMA2D. However, it was probably not left in a functional state anyway so I do not think that there is any loss. 
Squashed commit of the following:

    arch/arm/src/stm32f7:  Some minor changes for clean compilation of LTDC.
    arch/arm/src/stm32f7:  Add overly support for LTDC driver header file.
    arch/arm/src/stm32f7:  Add overly support for LTDC driver file.
    arch/arm/src/stm32f7:  Add overly support for DMA2D driver header file.
    arch/arm/src/stm32f7:  Finishes overly support for DMA2D driver.
    arch/arm/src/stm32f7:  Partial overly support in DMA2D driver (a lot more to be donw)
    arch/arm/src/stm32f7/chip:  Clone overlay DMA2D register definitions from F4
    arch/arm/src/stm32f7:  Clone overlay configuration from stm32 F4
 2018-06-15 13:13:12 -06:00
Evgeniy Bobkov
7d36a81806 Fixes two bugs in multi-block SD-card operations on the STM32F7 platform. arch/arm/src/stm32f7: DBLOCKSIZE must be the size of SD-card block, not the total amount of transferred bytes. drivers/mmcsd: respect SDIO_CAPS_DMABEFOREWRITE on CMD25. 2018-01-16 12:41:02 -06:00
Bob Feretich
fab5faf097 STM32F7: Completes architecture support for the STM32 F72x and F73x families. Adds support for the Nucleo-144 boards with STM32F722. 2017-11-18 07:55:50 -06:00
Jussi Kivilinna
585b04014f Merged in jussi_kivilinna/nuttx/stm32l4_serial_pm (pull request #534) 
STM32L4 serial PM interface improvements

* stm32l4_serial: pm: check rx/tx buffers for pending data in pmprepare

* stm32l4: remove adhoc PM interfaces and move serial suspend functionality behind CONFIG_PM

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-11-10 13:05:00 +00:00
Jussi Kivilinna
bcf4a5d056 Merged in jussi_kivilinna/nuttx/stm32l4_i2c_rewrite (pull request #519) 
Port STM32F7 I2C driver to STM32L4

* arch/stm32l4: port STM32F7 I2C driver to STM32L4

    STM32L4 I2C driver is in work-in-progress state (plentiful of
    TODOs and #warnings) and lags many features found in more
    up-to-date STM32 I2C drivers. The peripheral on STM32F7 and
    STM32L4 are identical except for L4's 'wakeup from stop mode'
    flag and STM32F7's I2C driver is in more 'ready to use' state.

    Patch ports the STM32F7 I2C driver to STM32L4. The I2C clock
    configuration is kept the same as before (I2CCLK = PCLK1 80 Mhz)
    instead of switching to STM32F7 arch default that is I2CCLK=HSI.
    Further work would be to add configuration option for choosing
    I2C clock source instead of current hard-coded default.

* arch/arm/stm32f7: i2c: restore bus frequency after I2C reset

    Copy frequency restoration fix from STM32L4 I2C driver to STM32F7 I2C driver.

* arch/arm/stm32f7: i2c: remove unused Kconfig option

* configs/nucleo-l496zg/nsh: enable I2C4 bus with i2ctool

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-10-26 13:59:20 +00:00
Jussi Kivilinna
449a891a8e stm32f7: add new configuration option for enabling flash ART Accelerator and flash prefetcher 2017-09-04 07:56:51 -06:00
Gregory Nutt
92b3c9477a Port Boris Astardzhiev RTC change for STM32L4 to STM32F7 2017-09-03 08:39:02 -06:00
Titus von Boxberg
604a6dc0fa improved help text 2017-08-01 01:23:28 +02:00
Titus von Boxberg
1944ab6f9b added missing config option for register value debugging 2017-08-01 01:23:28 +02:00
Titus von Boxberg
28eab902d0 No FSMC, only FMC for STM32F7 2017-07-27 18:27:01 +02:00
Gregory Nutt
c3b552e072 Minor cosmetic updates from review of last PR. 2017-07-20 07:39:57 -06:00
Titus von Boxberg
7b07471ece documentation update to f7 2017-07-19 19:14:50 +02:00
Titus von Boxberg
e67ba8c88d option for DSI output 2017-07-19 19:07:53 +02:00
Titus von Boxberg
ec3e4cabab added config and make stuff for stm32f7 ltdc 2017-07-19 19:07:53 +02:00
Jussi Kivilinna
7035723aeb STM32F7 serial: Allow configuring Rx DMA buffer size 2017-05-04 07:09:19 -06:00
Juha Niskanen
74e016d013 STM32F7: flash: macro naming errors, there is no FLASH_CONFIG_F for F7 
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
 2017-05-02 10:14:46 -06:00
Jussi Kivilinna
325ba1a803 clock: add clock_resynchronize and use subseconds RTC 
Add clock_resynchronize for better synchronization of CLOCK_REALTIME and CLOCK_MONOTONIC to match RTC after resume from low-power state.

Add up_rtc_getdatetime_with_subseconds under CONFIG_ARCH_HAVE_RTC_SUBSECONDS to allow initializing (and resynchronizing) system clock with subseconds accuracy RTC.
 2017-04-21 08:45:57 -06:00
Gregory Nutt
04ebdbb336 Move: CONFIG_ADC_NO_START_CONV from drivers/adc/Kconfig to arch/arm/src/stm32[f7]/Kconfig as STM32[F7]_ADC_NO_START_CONV. Refresh all configurations with any reference to CONFIG_ADC_NO_START_CONV. 2017-04-18 07:16:35 -06:00
Juha Niskanen
54eae7dcde STM32F7: warn if no DMA2 configured when using ADC with DMA. Also correct ADC channel numbers that DMA callback passes to upper half driver. 2017-04-18 06:49:51 -06:00
Jussi Kivilinna
e9a8dc7c6e STM32F7: serial: disallow broken configuration combination of CONFIG_STM32F7_FLOWCONTROL_BROKEN=y and CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS not set. 2017-04-11 06:39:27 -06:00
Jussi Kivilinna
e3b3e57e56 RTC: add interface for check if RTC time has been set 
New interface allows checking if RTC time has been set.  This allows to application to detect if RTC has valid time (after
reset) or should application attempt to get real time by other means (for example, by launching ntpclient or GPS).
 2017-04-06 09:53:11 -06:00
Jussi Kivilinna
dabf45f100 STM32F7: default CONFIG_STM32F7_DMACAPABLE to 'n'. STM32F7 does not have CCM RAM but DTCM, so this option does not need to enabled. DTCM RAM is DMA-able through CPU AHBS bus. 2017-04-06 08:44:53 -06:00
Jussi Kivilinna
41912ed98c STM32F7: add support for LSE RTC and enable RTC subseconds 2017-03-31 10:13:40 -06:00
Gregory Nutt
1c66c06315 STM32F7 SDMMC: Make sure that all SDMMC configuration variables begin with STM32F7_; Eliminate CONFIG_SDMMC1/2_DMA altogether. Does not appear to be used. 2017-01-31 14:27:50 -06:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
0804286ad3 arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS. 2016-11-19 09:20:01 -06:00
Gregory Nutt
1344d8b466 STM32F746-WS: A few repairs to the nsh/defconfig for USB support. 2016-11-07 09:20:47 -06:00
Gregory Nutt
dd04d73afe STM32F7 SD/MMC driver depends on CONFIG_SDIO_DMA which is only defined in stm32/Kconfig. Changed to CONFIG_STM32F7_SDMMC_DMA and defined in stm32f7/Kconfig. 2016-11-07 09:16:34 -06:00
David Sidrane
1c93e48a09 Removed STM32 porting vestiges 2016-06-28 07:13:22 -10:00
Gregory Nutt
c74269ced6 Significantly stylistic changes required after review of last PR 2016-06-28 09:37:21 -06:00
David Sidrane
a4040759b0 Adding PWR, RTC, BBSRAM for stm32f7 2016-06-27 16:42:01 -10:00
David Sidrane
adf0e8d357 Clean up F7 SDMMC 2016-06-24 13:23:35 -10:00
David Sidrane
0660e6378e Missing ADC2 2016-06-17 12:49:42 -10:00
David Sidrane
da51b4ecc0 Updated F7 I2C to support 4 devices and proper timing and configurations 2016-06-17 12:49:42 -10:00
David Sidrane
49de809096 Proper ADC and Timer Control 2016-06-17 12:48:29 -10:00