sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
26,952 Commits 1 Branch 0 Tags 291 MiB
55523f5771
Commit Graph

26952 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Gregory Nutt
55523f5771 arch/xtensa: Add a few basic XTENSA/LX6 files. Not yet enough to do anything with 2016-10-12 13:11:05 -06:00
Alan Carvalho de Assis
4195692bb4 Change "Board LED support" to "Board LED Status support" 2016-10-11 14:29:27 -06:00
Alan Carvalho de Assis
91fa8ffaea STM32F103 Minimum: Add button supprt 2016-10-11 14:14:06 -06:00
Alan Carvalho de Assis
4825a8fc3f STM32 Minimum: Note in Kconfig that the board supports buttons 2016-10-11 14:13:29 -06:00
Alan Carvalho de Assis
df313581db Correct typo in comments 2016-10-11 14:13:28 -06:00
Gregory Nutt
0bc19a63bb Merged in david_s5/nuttx-5/david_s5/kinetish-edited-online-with-bitbucket-1476115086140 (pull request #144) 
kinetis.h edited online with Bitbucket
 2016-10-10 10:04:04 -06:00
Gregory Nutt
3a5865c248 Merged in david_s5/nuttx-4/david_s5/kinetish-edited-online-with-bitbucket-1476114936502 (pull request #143) 
kinetis.h edited online with Bitbucket
 2016-10-10 10:03:22 -06:00
David Sidrane
0476c43748 kinetis.h edited online with Bitbucket 2016-10-10 15:58:21 +00:00
David Sidrane
4703a23171 kinetis.h edited online with Bitbucket 2016-10-10 15:56:02 +00:00
Gregory Nutt
79c9e25a12 include/nuttx/fs/nxffs.h: Needs forward reference to struct mtd_dev_s and needs to include stdbool.h 2016-10-09 14:07:19 -06:00
Gregory Nutt
e568b08b04 Update TODO list 2016-10-09 09:36:03 -06:00
Gregory Nutt
0fa7c62bf4 Update NuttX.html for 7.18 release 2016-10-08 11:47:19 -06:00
Gregory Nutt
693f513869 Update ReleaseNotes 2016-10-08 10:53:54 -06:00
Gregory Nutt
6ac51cb708 Update ChangeLog 2016-10-08 07:38:56 -06:00
Gregory Nutt
741e100dcf Eliminate some warnings 2016-10-07 13:47:02 -06:00
Gregory Nutt
18791db758 Merged in jgraef-linetco/nuttx/bugfix/up_dma2dcreatelayer-return-value (pull request #142) 
dma2d: fix an error in up_dma2dcreatelayer where an invalid pointer was returned when a certain underlying function failed.
 2016-10-07 07:42:34 -06:00
Jens Gräf
1d3abd17cc dma2d: fix an error in up_dma2dcreatelayer where an invalid pointer was returned when a certain underlying function failed. 2016-10-07 13:42:24 +02:00
Alan Carvalho de Assis
49ee2631f7 Enable JTAG in stm32f103-minimum/userled configuration 2016-10-06 13:33:31 -06:00
Gregory Nutt
d61239e38f stm32_modifycr2 should be available on all platforms is DMA is enabled. 2016-10-06 08:50:52 -06:00
Gregory Nutt
f34d5db094 More fixed related to name changes from CONFIG_WL_MFRC522 to CONFIG_CL_MFRC522. Also depends on CONFIG_CONTACTLESS. not CONFIG_WIRELESS. 2016-10-06 07:58:14 -06:00
Gregory Nutt
1fda0523da CONFIG_CL_MFR522, not CONFIG_WL_MFR522 2016-10-06 07:44:17 -06:00
Gregory Nutt
f55bee5325 Update defconfig files 2016-10-06 07:44:17 -06:00
Gregory Nutt
6a0917ae7f Eliminate warnings 2016-10-06 07:44:17 -06:00
Gregory Nutt
4f4b709ef5 configs/stm32l476-mdk/nsh: Remove CONFIG_CXX_INITIALIZE. up_cxxinitialize is not provided in apps/platfor for this board. 2016-10-06 07:08:50 -06:00
Gregory Nutt
2ce9415e96 Merged in raiden00/nuttx (pull request #141) 
configs/olimex-stm32-e407: Add some networking configurations
 2016-10-06 06:56:05 -06:00
Mateusz Szafoni
796fbe834a configs/olimex-stm32-e407: Add some networking configurations 2016-10-06 11:13:10 +02:00
Gregory Nutt
fc78eb6b28 Merged in david_s5/nuttx/master_l4_usbfix (pull request #140) 
Master l4 usbfix
 2016-10-05 06:45:48 -06:00
David Sidrane
d4a8585d6f Fixed L4 USB Driver by avoiding SETUPDONE and EPOUT_SETUP 2016-10-04 16:52:12 -10:00
David Sidrane
a416b304a3 Code Cleanup and conform to upstrem debug config 2016-10-04 16:51:47 -10:00
David Sidrane
e54a0cd3d0 Header cleanup 2016-10-04 16:51:32 -10:00
Gregory Nutt
419fd6e266 Merged in slorquet/nuttx/PR_nucleoenc (pull request #139) 
Add support for qencoders on various nucleo boards
 2016-10-03 08:10:39 -06:00
Sebastien Lorquet
9dcecd4b15 Add support for qencoders on various nucleo boards 2016-10-03 16:07:20 +02:00
Gregory Nutt
06c70129ed STM32L4: Remove dependencies on STM32 F3 from Kconfig 2016-10-02 16:05:13 -06:00
Gregory Nutt
d9181b55f1 Merged in slorquet/nuttx/stm32l4_qencoder (pull request #138) 
Add support for quadrature encoders on STM32L4, including gpio definitions for both directions of timer channels.
 2016-10-02 16:00:26 -06:00
Sebastien Lorquet
d5ef349d9a Add support for quadrature encoders on STM32L4 2016-10-02 23:26:16 +02:00
Alan Carvalho de Assis
53fa8b7296 configs/stm32f103-minimum: Add stm32_bringup support and userled example to STM32F103 Minimum board 2016-10-02 14:45:44 -06:00
Gregory Nutt
8669183852 sched/pthread and task: When a pthread is started, there is a small bit of logic that will run on the thread of execution of the new pthread. In the case where the new pthread has a lower priority than the parent thread, then this could cause both the parent thread and the new pthread to be blocked at the priority of the lower priority pthread (assuming that CONFIG_PRIORITY_INHERITANCE is not selected). 
This change temporarily boosts the priority of the new pthread to at least the priority of the new pthread to at least the priority of the parent thread.  When that bit of logic has executed on the thread of execution of the new pthread, it will then drop to the correct priority (if necessary) before calling into the new pthread's entry point.
 2016-10-01 11:38:22 -06:00
Gregory Nutt
75104b0808 Remove duplicate function prototype from wrong header file 2016-10-01 10:56:42 -06:00
Gregory Nutt
0f7b9d643f Correct statment in a document 2016-10-01 10:13:37 -06:00
Neil Hancock
ef475eb6a9 STM32 Ethernet: Correct typo in conditional logic 2016-10-01 07:32:41 -06:00
Vytautas Lukenskas
fd1de92016 There are some small problems in LPC43xx RS485 mode configuration. In particular: 1. UART0,2,3 do not have DTR pins (different from UART1), so, Kconfig needs to be adjusted. 2. lpc43_uart.c in RS485 mode only configures DIR pin, but doesn't enable pin output for UART0,2,3. 3. should be option to reverse DIR control pin output polarity. 4. lpc43xx/chip/lpc43_uart.h doesn't have USART3 definitions. NOTE: I didn't modified and didn't tested USART1, as it has different hardware. From Vytautas Lukenskas. 2016-09-30 08:51:49 -06:00
Gregory Nutt
937a83d9e4 Merged in young-mu/nuttx (pull request #137) 
Add a new ioctl command (set MAXPOS) for tiva QEI
 2016-09-26 08:38:53 -06:00
Young
7f32019a76 Add a new ioctl command (set MAXPOS) for tiva QEI 2016-09-26 18:10:06 +08:00
Young
3de6c210dc Merged nuttx/nuttx into master 2016-09-26 17:31:45 +08:00
Gregory Nutt
2da3da7fd6 Costmetic changes from review of last commit 2016-09-25 17:24:39 -06:00
Gregory Nutt
0908a6c6b9 Fix calculations using MSEC_PER_TICK. If USEC_PER_TICK is less than 1000, then MSEC_PER_TICK will be zero. It will be inaccurate in any case. 2016-09-25 08:17:33 -06:00
Gregory Nutt
25cd684012 Looks like I forgot to add some files in patch from a few days ago. 2016-09-22 11:12:10 -06:00
Petteri Aimonen
69577eb0b7 libnx/nxglib: Fix handling of near-horizontal lines of width 1 in nxgl_splitline(). Missing handling for degenerate condition caused width 1 lines such as (0, 0) - (100, 10) to have gaps in the drawing. 2016-09-22 11:09:06 -06:00
Gregory Nutt
93b48ea70f Fix a logic error introduced with last commit 2016-09-22 08:50:47 -06:00
Gregory Nutt
8221c2da64 Corrects a bad assertion noted by Pierre-noel Bouteville. Also fixes a reference counting problem in an error condition: When the mountpoint inode is found but is not an appropriate mountpoint, the reference count on the inode was not being decremented. 2016-09-22 08:22:28 -06:00