Gregory Nutt
b8665996d5
Revert 0eff3d530f
: This removes the kx224, bh1749nuc and bh1790glc. These are very nicely written drivers, but they are based on some external sequencer logic which is not available to everyone. Hence, these are inapropriate to carry in the NuttX repository.
2018-07-11 15:36:33 -06:00
Gregory Nutt
235d580984
drivers/sensors/bh1749nuc.c, bh1790glc.c, and x224.c: From review of commit 0eff3d530f
, remove dependency on the CXD56_SCU, modify inclusions and some naming for compatibility with other sensor drivers.
2018-07-10 16:16:15 -06:00
Juho Valkama
0eff3d530f
Merged in jutava/nuttx (pull request #673 )
...
Master
* drivers/sensors: added drivers for kx224, bh1749nuc and bh1790glc
They are reliant on the cxd56_scu.
* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc
They are reliant on the cxd56_scu.
* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc
They are reliant on the cxd56_scu.
* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc
They are reliant on the cxd56_scu.
* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc
They are reliant on the cxd56_scu.
* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc
They are reliant on the cxd56_scu.
* bh1790glc.h created online with Bitbucket
* bh1790glc.h deleted online with Bitbucket
* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc
They are reliant on the cxd56_scu.
* drivers/sensors: Added drivers for kx224, bh1749nuc and bh1790glc
They are reliant on the cxd56_scu.
* README.txt: minor typo fix
* Minor typo fix
Approved-by: GregoryN <gnutt@nuttx.org>
2018-07-10 12:38:25 +00:00
Juha Niskanen
5b899b76c4
drivers/sensors: Add support for Telair T6713 carbon dioxide sensor
2018-06-15 06:52:16 -06:00
Anthony Merlino
b1275abd4b
Merged in antmerlino/nuttx/ina3221 (pull request #636 )
...
drivers/sensors: Adds support for INA3221 power sensor. This has a 3 channel bus/shunt voltage pairs.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-05-02 22:29:59 +00:00
Bob Feratich
d893c5b55e
This commit adds LSM330 SPI and ADXL372 drivers.
...
Squashed merge of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
drivers/sensors: Fix some minor typos in last commit that cause some compile problems.
drivers/sensors/: Clean up some coding standard isses in LM330 and ADXL372 drivers.
drivers/sensors/README.txt: Clean up some long lines and odd line breaks.
include/nuttx/sensors: Completes coding style review of adxl372.h, cluster_driver.h, and lsm330.h.
Author: Bob Feretich <bob.feretich@rafresearch.com>
Add LSM330 SPI and ADXL372 drivers along with the cluster driver infrastructure.
2018-04-07 14:47:27 -06:00
Juha Niskanen
c268288c17
drivers/sensors: Add support for Sensirion SHT2x humidity sensor
2018-03-13 08:26:15 -06:00
Matt Thompson
e79e2e2d97
Merged in extent3d/nuttx/lis3dh (pull request #598 )
...
Added support for LIS3DH accelerometer sensor.
* Added support for LIS3DH accelerometer sensor.
* Fix line length
* Fix more line lengthts
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-02-13 19:00:29 +00:00
Juha Niskanen
dafa72edc3
drivers/sensors: add support to MAX44009 ambient light sensor
2018-01-29 07:56:06 -06:00
Gregory Nutt
5328e3bafb
configs/: CONFIG_QENCODER was renamed to CONFIG_SENSORS_QENCODER: update occurrences in several Kconfig files
2017-11-25 18:46:43 -06:00
Alan Carvalho de Assis
3268a6ac5f
drivers/sensor: Add driver for the APDS-9960 gesture sensor
2017-10-20 06:37:38 -06:00
Sebastien Lorquet
d16d4d5568
The INA219 is a combined voltage and current sensor that can measure up to 26 volts and a current that depends on an external shunt resistor. Connection happens via i2c/smbus and the chip features a power supply rail that is independent from the measured voltage, so it can measure low voltages.
...
This commit adds a driver for this chip. Right now it measures bus voltage and current, and does not use the internal calibrated current reading, nor the available power measurement.
2017-10-10 17:03:56 -06:00
Gregory Nutt
5129aeefd5
drivers/sensors: Fix remaining naming of configurations to be compliant for two more drivers.
2017-08-24 10:48:20 -06:00
Gregory Nutt
dc8f3778a9
drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go.
2017-08-24 10:26:53 -06:00
Gregory Nutt
1f023fa31a
drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go.
2017-08-24 10:10:00 -06:00
Gregory Nutt
269107afc8
drivers/sensors: Make naming configuration compliant for two more drivers. Still several to go.
2017-08-24 09:54:23 -06:00
Gregory Nutt
7f4af7b690
drivrs/sensors: Make a few other configuration settings consistent with the (undocumented) standard.
2017-08-24 09:45:46 -06:00
Gregory Nutt
5dd25bbfde
Missed two naming changes in last commit
2017-08-24 09:32:24 -06:00
Gregory Nutt
9e386e3b31
drivrs/sensors/hts221: Fix inconsistent configuration variable naming; Try to bring closer to an as-of-yet undocumented naming convention.
2017-08-24 09:22:36 -06:00
Alan Carvalho de Assis
50e2e08742
drivers/sensors: Add support to HC-SR04 distance sensor
2017-08-17 18:52:54 -06:00
Gregory Nutt
ee4b69f0d3
Review of last PR. Fixes many coding standard problems.
2017-07-28 07:16:35 -06:00
Giorgio Groß
b55ec110f2
Add driver for LTC4151 current and voltage monitor
2017-07-28 13:05:56 +02:00
Juha Niskanen
32610b53f4
drivers/{sensors,usbmisc}: Fix uninitialized I2C frequency
2017-06-01 06:19:54 -06:00
Juha Niskanen
34e68a569b
drivers: rename newly introduced up_i2creset to I2C_RESET
2017-05-15 07:22:17 -06:00
Juha Niskanen
dfe6a672c1
drivers/sensors: Add driver for ST LIS2DH accelerometer. From Timo Voutilainen <time.voutilainen@haltian.com> et al.
2017-04-03 07:28:22 -06:00
Juha Niskanen
b5b148fef8
drivers/sensors: Add driver for ST LPS25H pressure sensor
2017-03-31 05:53:43 -06:00
Juha Niskanen
9e2b3da3e8
drivers/sensors: Add driver for ST HTS221 humidity sensor
2017-03-30 12:17:23 -06:00
raiden00
82cb38c824
drivers/sensors: Add driver for the ST L3GD20 3 axis gyro
2017-02-19 17:43:44 +01:00
Alan Carvalho de Assis
a6b7730f8c
Add Vishay VEML6070 driver and support for STM32F103-Minimum board
2016-11-13 11:44:28 -06:00
Alan Carvalho de Assis
61980caee5
drivers/sensors: Adds support for the Sensixs XEN1210 3D-boar. This sensor is used on NANOSATC-BR2 a Brazillian CUBESAT project.
2016-09-16 12:45:53 -06:00
Alexander Entinger
221fcfd8f1
drivers/sensors: Add driver for the Bosch BMG160 3 axis gyroscop.
2016-08-24 09:41:04 -06:00
Alexander Entinger
0044910e33
drivers/sensors: Add driver for the LIS3DSH 3 axis accelerometer.
2016-08-24 08:28:45 -06:00
Entinger Alexander
b29287b022
drivers/sensors: Add driver for the MLX90393 3 axis magnetometer.
2016-08-23 10:48:08 -06:00
Entinger Alexander
338bf8c9e3
drivers/sensors: Add drvier for the LIS3MDL 3 axis magnetometer
2016-08-23 08:22:47 -06:00
Gregory Nutt
c32d40fd7d
KXJT9 Accelerometer driver from the Motorola Moto Z MDK
2016-08-02 10:38:14 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Alan Carvalho de Assis
7f5339ee5a
drivers/sensors/h1750fvi.c: Add a character driver for Rohm Ambient Light Sensor BH1750FVI.
2016-04-15 08:16:16 -06:00
Gregory Nutt
009e9f76cb
I2C: Fixes/improvements from last massive I2C commits
2016-02-02 07:13:03 -06:00
Gregory Nutt
6ad641888b
Add I2C frequency to the i2c_msg_s structure
2016-02-01 14:17:20 -06:00
Gregory Nutt
8c9bddf998
I2C: Eliminate the I2C_WRITE and I2C_READ macros
2016-02-01 08:57:22 -06:00
Gregory Nutt
9844036a74
Merged in paulpatience/nuttx/lsm9ds1 (pull request #48 )
...
Add LSM9DS1 accelerometer, gyroscope and magnetometer
2016-01-17 15:06:37 -06:00
Paul A. Patience
57b8a9526d
Add LSM9DS1 accelerometer, gyroscope and magnetometer
2016-01-17 16:01:14 -05:00
Alexander Entinger
75d6c4cee3
drivers/sensors/mcp9844: Driver for the MCP9844 I2C digital temperature sensor with a selectable resolution
2016-01-15 07:25:58 -06:00
Alan Carvalho de Assis
0ba6f21532
Add support to Thermocouple-to-Digital converter MAX6675
2015-10-18 07:52:47 +08:00
Alan Carvalho de Assis
8f0c912fff
Add Zero Cross device driver support
2015-10-13 07:27:16 -06:00
Alan Carvalho de Assis
c4cf5be231
Add support to Maxim MAX31855 Thermocouple-to-Digital
2015-09-13 15:56:48 -06:00
Paul A. Patience
3303ef8c85
Added support for other MS58XX altimeters.
2015-08-14 20:04:16 -04:00
Paul A. Patience
c4b888b41d
Added MS5805 altimeter.
2015-08-11 22:50:11 -04:00
Paul A. Patience
a634ad5528
Added MB7040 sonar.
2015-08-11 13:26:56 -04:00
Paul A. Patience
65792c5dbc
Added forward declarations of structures to fix header inclusion
...
order bugs.
Removed an unused variable.
Added debug asserts to check for invalid I2C addresses.
2015-08-10 16:18:37 -04:00
Paul A. Patience
b7e0fc34c5
Added AS5048B magnetic rotary encoder.
2015-08-07 17:22:01 -04:00
Gregory Nutt
6d59603610
Trivial updates from review of LM92 driver; Update ChangeLog
2015-08-06 16:33:02 -06:00
Paul A. Patience
282c4f5347
Added LM92 temperature sensor.
2015-08-06 17:35:34 -04:00
Alan Carvalho de Assis
a01b2e5bbc
drvers/sensor and include/nuttx/sensors: Add support to Bosch BMP180 barometer. From Alan Carvalho de Assis.
2015-07-20 07:18:27 -06:00
Gregory Nutt
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
38aa31dea2
Update ChangeLog
2015-02-12 12:21:05 -06:00
Gregory Nutt
383a47fb28
DK-TM4C129X: Add support for on-board TMP100 temperature sensor
2015-01-06 11:50:56 -06:00
Gregory Nutt
ae18f9dacd
Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg()
2014-12-16 09:54:32 -06:00
Gregory Nutt
10863af628
Add ADXL345 accelerometer driver. From Alan Carvalho de Assis
2014-12-16 08:16:53 -06:00
Gregory Nutt
4d07c15932
Add OV2640 camera support to test the SAMA5 ISI peripheral
2013-12-09 10:51:22 -06:00
Gregory Nutt
968b2553cd
Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level
2013-08-10 09:06:53 -06:00
patacongo
1dc41e329b
Kconfig update
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4599 42af7a65-404d-4744-a932-0658087f49c3
2012-04-13 14:27:44 +00:00
patacongo
330b89ca0e
Add kconfig documentation
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4567 42af7a65-404d-4744-a932-0658087f49c3
2012-04-06 16:45:52 +00:00
patacongo
4b8c0c41c8
Adding skeleton Kconfig files (part 1 of 2)
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4564 42af7a65-404d-4744-a932-0658087f49c3
2012-04-06 15:49:35 +00:00