anjiahao
5724c6b2e4
sem:remove sem default protocl
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2022-10-22 14:50:48 +08:00
chao an
3f14efa033
wireless/bcm43xxx: Add missing FAR qualifier to bcmf_driver
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-10-21 14:38:45 +08:00
chao.an
d27129bc35
wireless/bcm43xxx: discard auth event if netdev down
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-10-21 14:38:45 +08:00
chao an
d861c7bfd9
wireless/bcm43xxx: subscribe only to the events we need
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-10-21 14:38:45 +08:00
chao.an
1935783392
wireless/bcm43xxx: skip WEP privacy
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-10-21 14:38:45 +08:00
chao.an
38534e06dd
wireless/bcm43xxx: skip bad channel bss
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-10-21 14:38:45 +08:00
chao an
4fe321b6fb
wireless/bcm43xxx: correct auth status if PSK is invaild
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-10-21 14:38:45 +08:00
chao.an
41c86c526a
wireless/bcm43xxx: only report PSK ssid by scan filter
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-10-21 14:38:45 +08:00
anjiahao
d1d46335df
Replace nxsem API when used as a lock with nxmutex API
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-17 15:59:46 +09:00
Xiang Xiao
bdeaea3742
Remove the unnessary empty line after label
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-09-30 17:54:56 +02:00
curuvar
89d3ba44ca
Fixes to RP2040 SMART flash and documentation
2022-09-06 13:13:00 +08:00
curuvar
74f1bfbfd7
Added support for Raspberry Pi Pico W
2022-08-17 19:03:19 -03:00
curuvar
e247eaf3e8
Add gSPI mode support for Infineon CYW43539
2022-08-15 10:31:36 +08:00
Gustavo Henrique Nihei
e999708b31
drivers: Convert DEBUGASSERT(false) into more intuitive DEBUGPANIC()
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-07-14 12:08:45 +08:00
Nathan Hartman
849f760b77
Fix various typos
2022-07-08 02:15:54 +08:00
chao.an
5048be1bfe
wireless/bcm43xxx: set listen interval on lowpower
...
set listen interval dtim(Delivery Traffic Indication Message) on lowpower mode
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-07-03 02:28:50 +08:00
chao.an
9a4f494da2
wireless/bcm43xxx: fix memory leak if tx fail
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-07-02 21:33:16 +08:00
chao.an
f424bb32aa
wireless/bcm43xxx: only break out the send loop if no data
...
only break out the continuous send if IP stack has no data to send to avoid
tx being constantly interrupted by RX
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-07-02 19:39:49 +08:00
chao.an
96192eac55
wireless/bcm43xxx: filter out the bssi with same ssid name
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-07-02 19:39:23 +08:00
chao.an
ba3e859aa5
wireless/bcm43xxx: allocate tx frame with nonblock mode
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-07-02 19:24:34 +08:00
chao.an
5ce7b35020
wireless/bcm43xxx: replace private queue implement to list_node
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-07-02 19:24:34 +08:00
chao.an
14f1519d1e
wireless/bcm43xxx: discard auth event if netdev down
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-07-02 17:39:52 +08:00
chao.an
752e48eb34
wireless/bcm43xxx: remove flowctrl check
...
remove flowctrl check since credit is enough to check flow control status
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-07-02 17:34:56 +08:00
chao.an
fe2231989b
wireless/bcm43xxx: mac address does not need to be updated in ifup
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-07-02 16:14:54 +08:00
chao.an
bd713d6431
wireless/bcm43xxx: country code should terminating with null
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-07-02 14:13:21 +08:00
chao.an
bc6b3f34c8
wireless/bcm43xxx: enable tx flow control to improve performance
...
RX/TX shared free queue on bcmf implementation, if TX occupies the
free queue completely, RX will trigger read abort because it cannot
alloc buffer successfully from the shared free queue. This commit will
limit the sending entries of tx and prevent rx triggering abort
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-29 09:06:57 +03:00
chao.an
b5e9409880
Revert "wireless/bcm43xxx: remove unused tx_queue_count"
...
This reverts commit c3b84b9b3b
.
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-29 09:06:57 +03:00
chao.an
c3b84b9b3b
wireless/bcm43xxx: remove unused tx_queue_count
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-26 16:06:20 +08:00
chao.an
43497df78b
wireless/bcm43xxx: add dynamic kso control support
...
1. PMU control by KeepSdioOn(KSO) if firmware support save restore
2. Remove watchdog timer
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-25 19:52:13 +08:00
chao.an
2eb1124db5
wireless/bcm43xxx: correct the return value
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-25 16:45:34 +08:00
chao.an
15864ff109
wireless/bcm43xxx: add get country code support
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-23 21:48:08 +08:00
chao.an
442e75575e
wireless/bcm43xxx: add set country code support
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-23 00:08:10 +08:00
chao.an
04fcbb5cb8
wireless/bcm43xxx: add auto power saving support
...
switch firmware power mode between PM_MAX/PM_FAST
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-21 02:33:18 +08:00
chao.an
2772efc862
wireless/bcm43xxx: remove small chunks to improve clm download speed
...
Chunk length is fine as long as it does not exceed 1400
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-19 23:12:10 +08:00
chao.an
2e3ed3ae67
wireless/bcm43xxx: prefer HPWORK if bcmf task has higher priority than HPWORK
...
Use high priority queue if the bcmf daemon task has a higher priority
than HPWORK, which will bring better performance especially on devices
that focus on real-time of network.
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-19 23:11:52 +08:00
chao.an
47ebec34e3
wireless/bcm43xxx: merge frame send to once to improve the performance
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-19 20:59:50 +08:00
chao.an
fa6ea23101
wireless/bcm43xxx: enable power saving on netdev up/down
...
Move sdio/firmware de/initialize to ifup/down
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-19 19:08:00 +08:00
chao.an
0ec74ec6dd
wireless/bcm43xxx: remove global variable for bcmf_sdio_thread
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-19 11:43:25 +08:00
chao.an
fbddae8813
wireless/bcm43xxx: add customized MAC address support
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-19 10:13:23 +08:00
chao.an
e498e5308a
wireless/bcm43xxx: handle disassoc correctly
...
1. use WLC_DISASSOC to deal disconnect event
2. carrier net device status
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-18 19:43:13 +08:00
chao.an
e6a23e7b8a
wireless/bcm43xxx: sort scan result by rssi
...
1. Replace SCAN_RESULT_SIZE to SCAN_RESULT_ENTRIES
2. filter scan result with better rssi
3. Sort scan result by rssi
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-18 19:42:30 +08:00
Xiang Xiao
0de089e2e8
wireless/bcm43xxx: Don't call bcmf_board_setup_oob_irq in bcmf_sdio_thread
...
since oob irq is already setup in bcmf_bus_setup_interrupts, it waste
time and energy to do the same thing repeatly in the work thread.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-06-17 20:12:41 +08:00
chao.an
2992b10fbb
wireless/bcm43xxx: add more ioctl command support
...
Support command:
SIOCGIWFREQ
SIOCGIWMODE
SIOCSIWAP
SIOCGIWAP
SIOCGIWESSID
SIOCGIWRATE
SIOCGIWTXPOW
SIOCGIWSENS
SIOCGIWRANGE
Before: After:
cp> wapi show wlan0 cp> wapi show wlan0
wlan0 Configuration: wlan0 Configuration:
IP: 192.168.31.202 IP: 192.168.31.202
NetMask: 255.255.255.0 NetMask: 255.255.255.0
ioctl(SIOCGIWFREQ): 88 Frequency: 5785
ERROR: wapi_get_freq() failed: -88 Flag: WAPI_FREQ_AUTO
ioctl(SIOCGIWESSID): 88 Channel: 157
ERROR: wapi_get_essid() failed: -88 Frequency: 5785
ioctl(SIOCGIWMODE): 88 ESSID: archer5
ERROR: wapi_get_mode() failed: -88 Flag: WAPI_ESSID_ON
ioctl(SIOCGIWAP): 88 Mode: WAPI_MODE_MANAGED
ERROR: wapi_get_ap() failed: -88 AP: ec:41:18:e0:76:7f
ioctl(SIOCGIWRATE): 88 BitRate: 58500
ERROR: wapi_get_bitrate() failed: -88 Flag: WAPI_BITRATE_FIXED
ioctl(SIOCGIWTXPOW): 88 TxPower: 31
ERROR: wapi_get_txpower() failed: -88 Flag: WAPI_TXPOWER_DBM
ioctl(SIOCGIWSENS): 25 Sense: -17
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-17 18:27:12 +08:00
chao.an
9c68064024
wireless/bcm43xxx: add status print on bcmf_wl_auth_event_handler()
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-17 16:17:01 +08:00
chao.an
e2c154dffe
wireless/bcm43xxx: configurable buffer size of escan result
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-16 23:36:40 +08:00
chao.an
29dd12283c
wireless/bcm43xxx: replace all busy delay to nxsig_usleep
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-16 23:02:09 +08:00
chao.an
b33a709213
wireless/bcm43xxx: improve throughput of net driver
...
1. Wake up tx if there is data alreay to sent after rx update
2. Try tx queue again after every data frame sent
iperf test:
```
TCP RX 4M->16M
TCP TX 2M->14M
UDP RX 18M->26M
UDP TX 2M->18M
```
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-16 21:08:28 +09:00
Xiang Xiao
f75f100954
bcm43xxx: Remove bcmf_txavail_work and resue bcmf_tx_poll_work
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-06-16 09:13:16 +03:00
chao.an
6d85e9b320
wireless/bcm43xx: replace sem_wait to uninterruptible version
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-16 02:44:47 +08:00
chao.an
0951d859d3
wireless/bcm43xxx: configurable schedule priority of daemon thread
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-16 01:41:50 +08:00