sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
10,612 Commits 1 Branch 0 Tags 291 MiB
58c7e16960
Commit Graph

1984 Commits

Author SHA1 Message Date
Gregory Nutt
62aee62c3a Some extensions to netinet/in.h adding some Linux compatible defintions. From Macs N. 2015-02-11 06:35:34 -06:00
Gregory Nutt
410fcaa0a1 Added a forward reference to struct inode to avoid warning about mismatching types in assignemnt 2015-02-10 13:41:49 -06:00
Gregory Nutt
559f1ef825 Networking: Clean up and consolidate some clunky stuff by adding new net_timedwait() function 2015-02-09 07:50:10 -06:00
Gregory Nutt
2ae737f906 Update ChangeLog 2015-02-08 06:58:23 -06:00
Gregory Nutt
3465cb6138 SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville. 2015-02-08 06:53:24 -06:00
Gregory Nutt
252802d1cd Remove inclusion of some un-necessary header files. 2015-02-06 08:50:53 -06:00
Gregory Nutt
3e6705b526 IPv6: Separate function that converts prefix lengths to a netmask 2015-02-06 08:11:09 -06:00
Gregory Nutt
10cf7e9634 Make some conditional compilation consistent 2015-02-05 14:26:11 -06:00
Gregory Nutt
c7f71c99a5 Networking: Changes need to build ICMPv6 'router' configuration on STM32 with network debug enabled 2015-02-05 11:47:56 -06:00
Gregory Nutt
6f3f43d930 IPv6: Add a netmaks for the local link address 2015-02-05 05:43:57 -06:00
Gregory Nutt
24d800398e Networking: Break out Ethernet definitions into a separate file; add IPv6 multicast addresses as common globals, Ethernet drivers need to filter link-local, all nodes Ethernet address 2015-02-04 14:51:20 -06:00
Gregory Nutt
1c05245963 STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com> 2015-02-04 06:49:05 -06:00
Gregory Nutt
66f0198e3f Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete 2015-02-03 13:25:28 -06:00
Gregory Nutt
0e23712db4 Add an ioctal() that can be used to perform ICMPv6 auto-configuration 2015-02-03 08:54:42 -06:00
Gregory Nutt
1d534ff896 Convert the 64-bit usec limit to a 32-bit tick limit 2015-02-03 07:18:17 -06:00
Gregory Nutt
a448e0f69f On my platform I have just 16-bit timer clocked at 32kHz. As result oneshot timer max delay is 2s. The patch adds limit of maximum ticks in sched_timer_start (nuttx/sched/sched/sched_timerexpiration.c). From Macs N. 2015-02-03 06:25:19 -06:00
Gregory Nutt
2407008b6e drivers/ramdisk.c and include/nuttx/fs/ramdisk.h: Add logic to dispose of the drvier and RAM buffer when the RAM disk has been unlinked and all open references to the RAM disk have been closed. Add new parameters to romdisk() to specify what should be done with the RAM/ROM buffer -- Should it be freed or not? Changed all calls to ramdisk() to use these new parameters. 2015-02-01 07:24:16 -06:00
Gregory Nutt
a6f1dfa5b0 Remove execute privileges from some header files 2015-02-01 06:24:18 -06:00
Gregory Nutt
eb1aca3e46 Add an unlink method to block driver interface. Same motivataion as for the same modification to the character driver interface 2015-01-31 13:19:23 -06:00
Gregory Nutt
62e588a0a4 VFS: Add an unlink method to the character driver interface. This is important because if the character driver inode is unlinked and there are no open references to the driver, then the driver resources will be stranded. On the unlink call, the driver has the opportunity (1) check if there an any open references, and (2) if not free the driver resources 2015-01-31 11:31:34 -06:00
Gregory Nutt
e86d00913e Unix domain/FIFOs: Fix a race condition between FIFO buffer operations and the opening and closing of FIFOs which necessary when the FIFOs are used to support Unix domain, datagram sockets. The default policy is the deallocate FIFO buffering when the last client closes the pipe. When when used for datagram communicatinos, packets left in the FIFO will be lost. Some like UDP read-ahead is needed: The buffered data in the FIFO needs to be retained until the reader gets a chance to re-open the FIFO. Added an ioctl (PIPEIOC_POLICY) to control the buffer policy. Default (0) is the legacy behavior; Unix domain datagram logic sets the alternative policy so that the packet data persists after the FIFO is closed. 2015-01-30 11:14:24 -06:00
Gregory Nutt
5f9837dcc8 Merge remote-tracking branch 'origin/master' into afunix 
Conflicts:
	nuttx/ChangeLog
 2015-01-27 21:47:12 -06:00
Gregory Nutt
c4bd6f52b5 Networking: The are issues with the TCP write-ahead buffering if CONFIG_NET_NOINTS is enabled: There is a possibility of deadlocks in certain timing conditions. I have not seen this with the Tiva driver that I have been users but other people claim to see the issue on other platforms. Certainly it is a logic error: The network should never wait for TCP read-ahead buffering space to be available. It should drop the packets immediately. 
This was fixed by duplicating most of the IOB interfaces:  The versions that waited are still present (like iob_alloc()), but now there are non-waiting verisons of the same interfaces (like iob_tryalloc()).  The TCP read-ahead logic now uses only these non-waiting interfaces.
 2015-01-27 21:23:42 -06:00
Gregory Nutt
cbf0608513 Various fixes to get Unix domain sockets to build on the simulator without Ethernet 2015-01-27 14:11:46 -06:00
Gregory Nutt
6418f08459 Add math library defines for nan functions. From Brennan Ashton. 2015-01-26 19:03:38 -06:00
Gregory Nutt
b12cf6d2f5 Add math library support for trunc functions. From Brennan Ashton. 2015-01-26 19:00:35 -06:00
Gregory Nutt
06337a4f7a Add math library support for copysign. From Brennan Ashton 2015-01-26 18:52:28 -06:00
Gregory Nutt
7e177e1c12 Add error function to math library. From Brennan Ashton. 2015-01-26 13:58:47 -06:00
Gregory Nutt
36d5c00ec6 Add math library definition for isfinite. From Brennan Ashton. 2015-01-26 13:55:49 -06:00
Gregory Nutt
e153959eea Add support for inverse hyperbolic functions. From Brennan Ashton 2015-01-26 13:52:53 -06:00
Gregory Nutt
d7189558a6 Add ioctls for Unix domain sockets 2015-01-24 11:57:06 -06:00
Gregory Nutt
bf61008448 Add sys/un.h header file 2015-01-24 11:44:06 -06:00
Gregory Nutt
d84abfafc4 Fix another error in conditional compilation; plus some additional cosmetic changes 2015-01-24 09:04:28 -06:00
Gregory Nutt
f4bb7f14e1 Networking: Clean up network status collection and presentation for IPv6 2015-01-24 08:26:12 -06:00
Gregory Nutt
96a53254dd Some minor clean-up of IPv4/6 flags 2015-01-24 07:29:43 -06:00
Gregory Nutt
7e46e94546 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
05c5c8c337 Add CONFIG_STACK_COLORATION that does the same thing as CONFIG_DEBUG_STACK but without enabling debug. From David Sidrane 2015-01-24 06:03:39 -06:00
Gregory Nutt
dc759d31d9 Math library: Adds support for the expm1 functions: http://pubs.opengroup.org/onlinepubs/009695399/functions/expm1.html. From Brennan Ashton 2015-01-23 17:15:42 -06:00
Gregory Nutt
30f0a942e1 Networking: First cut at ICMPv6 ping logic 2015-01-23 14:06:08 -06:00
Gregory Nutt
9f40a13cfa Correct the MSS calculation 2015-01-22 12:30:07 -06:00
Gregory Nutt
6175e9eec5 Networking: Correct the value returned by accept() in the case where net_lockingwait() is called. It was returning -1 and losing the errno value. Noted by Rony Xln 2015-01-22 06:51:31 -06:00
Gregory Nutt
38e0dcf097 Networking: Fix another error in an IPv6 macro. Again ampersand where there should not be one 2015-01-21 14:11:20 -06:00
Gregory Nutt
8132afb3de Fix some errors in memcpy arguments. No ampersands on array arguments. 2015-01-21 12:42:22 -06:00
Gregory Nutt
5d31687e75 Correct name of fields in struct sockaddr_in6: sin6_port and sin6_family, not sin_port and sin_family 2015-01-20 18:14:09 -06:00
Gregory Nutt
67a655ecf0 Networking: Add logic to search the Neighbor Table and update the destination address in the output Ethernet header OR to send an ICMPv6 Neighbor Solicitation if there is no entry in the Neighbor table for the IPv6 address 2015-01-20 14:37:02 -06:00
Gregory Nutt
d68cd0d8de Networking: Update ICMPv6 logic to RFCs 2015-01-20 11:06:51 -06:00
Gregory Nutt
2fd334432c Networking: Fix to ICMPv6 logic: Needs to set source and destination address in the Ethernet header 2015-01-19 14:57:55 -06:00
Gregory Nutt
13149536f2 Networking: Update ICMPv6 message numbers 2015-01-19 14:04:16 -06:00
Gregory Nutt
59c0757183 Fix a few more dangling IPv6 issues found by code inspection 2015-01-18 10:33:27 -06:00
Gregory Nutt
f7663ef0ab Networking: Final detangle off IPv4 and IPv6 TCP/UDP send logic. The Networking subsystem now compiles with IPv6 enabled 2015-01-18 08:56:05 -06:00
Gregory Nutt
86f617cc88 Networking: Straighten up use if IPv6/IPv4 in TCP connection logic 2015-01-17 17:07:54 -06:00
Gregory Nutt
94f9312150 Networking: Save the IP domain in the connection structure 2015-01-17 13:07:48 -06:00
Gregory Nutt
2c251d845c include/net/if.h: Add a bit to the device flags to indicate if the device packet buffer holds an IPv4 or an IPv6 domain packet. Set/clear the flag along with the correct offset to the application payload data as each packet is received. 
net/socket, net/tcp, net/udp:  Add logic to select the domain of the outputgoing packet before sending any UDP or TCP packet.  This sets the bit to indicate the IPv4 or IPv6 domain and the correct offset to the output going payload data.
 2015-01-17 07:42:09 -06:00
Gregory Nutt
88a0e82934 Networking: Remove field d_sndata from the device structure. It is the same as d_appdata and unnecessary 2015-01-17 05:59:13 -06:00
Gregory Nutt
8f8259a0d6 Networking: UDP and TCP MSS depends on the IP header size (as well as the link layer header size) and cannot be represented with a single value. 2015-01-16 15:03:10 -06:00
Gregory Nutt
2663538b0a Networking: Replace all references to the macros net_ipaddr_copy, net_ipaddr_hdrcopy, net_ipaddr_cmp, net_ipaddr_hdrcmp, and net_ipaddr_maskcmp with the appropriate IPv4 or IPv6 version of the macro (such as net_ipv4addr_copy). The goal is to support both IPv4 and IPv6 simultaneously. This requires that the macros be distinct and not conditionally defined to one on or the other. 2015-01-16 13:01:08 -06:00
Gregory Nutt
5e938941a6 Networking: Replace all references to net_ipaddr_t with either in_addr_t on net_ipv6addr_t. The goal is to support both IPv4 and IPv6 simultaneously. This requires that the two types be distinct and not conditionally typedef'ed to net_ipaddr_t. 2015-01-16 12:30:18 -06:00
Gregory Nutt
bee89be4f4 Networking: Drivers can have both IPv4 and IPv6 addesses, but a socket can only only one or the other; The socket connnection structures need to include a union of IPv4 and IPv6 addresses for the local address binding and for the remote address connections 2015-01-16 10:01:54 -06:00
Gregory Nutt
fe8b3c5220 Networking: More detangling of IPv6 logic. Next steps will be more invasive and will get moved to a branch 2015-01-16 08:51:18 -06:00
Gregory Nutt
5b45605991 Clean a few more IPv6 compilation issues; Add implementation of net_ipv6_maskcmp() 2015-01-15 15:55:52 -06:00
Gregory Nutt
630366272a Networking: Seperate tcp_input() and udp_input() into seprate functions tcp_ipv4_input(), tcp_ipv6_input(), udp_ipv4_input(), and upd_ipv6_input() than can deal will the data offsets caused by the differing sizes of the IP header. 2015-01-15 15:06:46 -06:00
Gregory Nutt
60e50ff3b5 Networking: More IPv6 detanglement 2015-01-15 13:08:28 -06:00
Gregory Nutt
5a441ce03b Networking: Misck IPv6 detanglement 2015-01-15 12:19:44 -06:00
Gregory Nutt
89538ac4a2 - Rename devif_input() ipv4_input() 
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
 2015-01-15 08:03:56 -06:00
Gregory Nutt
a49f0231d2 Networking: A few more IPv6-related fixes 2015-01-14 18:34:28 -06:00
Gregory Nutt
a7ce1279f9 Networking: (1) Copied all ICMP sources files to net/icmpv6 with proper renaming and removal of IPv4 logic, (2) remove IPv6 logic from files in net/icmp, (3) copied include/nuttx/icmp.h to icmpv6.h and removed IPv4 specific logic, (4) removed all IPv6 logic from icmp.h, (5) IP_HDRLEN became IPv4_HDRLEN and IPv6_HDRLEN, (6) ip_chksum() became ipv4_chksum() and ipv6_chksum(), and (7) added partial support for ICMPv6 statistics. 2015-01-14 16:10:38 -06:00
Gregory Nutt
7d68c22d7f Networking: Add support for IPv6 ioctls 2015-01-14 13:03:12 -06:00
Gregory Nutt
31a94816b2 USB host drivers: Change all parmeters named class to usbclass to avoid C++ conflicts 2015-01-11 08:05:09 -06:00
Gregory Nutt
089e001874 STM32 SDIO: CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE should not be available unless CONFIG_MMCSD_SDIO=y 2015-01-08 18:12:06 -06:00
Gregory Nutt
1842525cc2 MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy. 
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.

This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.

From David Sidrane
 2015-01-08 06:23:42 -06:00
Gregory Nutt
2b522bab9e Update ChangeLog 2015-01-06 10:52:05 -06:00
Gregory Nutt
e9cec9057b There were some changes which broke my NuttX-Build. With these two patches it builds again. From Manuel Stühn 2015-01-01 15:56:25 -06:00
Gregory Nutt
cf651e0ce3 Fix warning caused by missing comment closing */. From David Sidrane. 2014-12-30 06:22:18 -06:00
Gregory Nutt
b4f235c33f Added forward reference to eliminate warnings. From David Sidrane. 2014-12-30 06:20:40 -06:00
Gregory Nutt
1bfec1a702 Fixes warning about block_operations not being defined. From David Sidrane. 2014-12-30 06:19:30 -06:00
Gregory Nutt
089578319a STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane 2014-12-27 18:58:18 -06:00
Gregory Nutt
aefde565d3 Serial Upper Half: Add watermarks to RX flow control logic 2014-12-27 07:43:06 -06:00
Gregory Nutt
6daa9468f6 More RAMTRON related fixes from David Sidrane 2014-12-26 08:15:59 -06:00
Gregory Nutt
996d6c9d55 Most superstitous updates to the RAMTROM driver make it more compatibile with the version used by PX4. From David Sidrane 2014-12-26 07:59:09 -06:00
Gregory Nutt
fa5dffbc18 STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review 2014-12-19 14:52:17 -06:00
Gregory Nutt
7a874e5d4c ili9341: update interface control definitions 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:52:40 -06:00
Gregory Nutt
3ce3b168f8 stm32: Add interface description for ltdc controller. This defines the interface to perform hardware accelerated layer operation by the ltdc controller. 
The following methods must be supported by the implementation:

- gevideoinfo
- getplaneinfo
- getlid
- setclut
- getclut
- setcolor
- getcolor
- setcolorkey
- getcolorkey
- setalpha
- getalpha
- setblendmode
- getblendmode
- setarea
- getarea
- update

And if DMA2D is supported:

- blit
- blend

The method up_ltdcgetlayer provides access to a reference of a specific ltdc
layer.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:45:18 -06:00
Gregory Nutt
a1a2e53c3e Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis 2014-12-18 13:52:01 -06:00
Gregory Nutt
937f9f23f1 strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8. 2014-12-17 12:24:02 -06:00
Gregory Nutt
d818ab5e35 Update the ADXL345 interface following the current interface scheme 2014-12-16 11:45:28 -06:00
Gregory Nutt
c9ca51fc8a Minor clean-up associated with the ADX345 driver 2014-12-16 10:18:44 -06:00
Gregory Nutt
ae18f9dacd Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
10863af628 Add ADXL345 accelerometer driver. From Alan Carvalho de Assis 2014-12-16 08:16:53 -06:00
Gregory Nutt
16f5ea451b Fix cosmetic typo in header file idempotence. Note by Lazlo 2014-12-10 18:27:29 -06:00
Gregory Nutt
cb76fc05fc Lots of fonts that derive from X11-misc-fixed-* fonts. Converted for use by NuttX by Pierre-Noel Bouteville 2014-12-10 17:11:23 -06:00
Gregory Nutt
cdc8fc52d1 SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit 2014-12-09 14:11:15 -06:00
Gregory Nutt
69cb752813 Add CRC8 support. From Ken Pettit 2014-12-09 13:27:22 -06:00
Gregory Nutt
7f59a64f42 stdint.h: Don't use hex values to specify minimum values of fixed width, signed values. Hex values are inherently unsigned and not usable for this purpose in all contexts 2014-12-08 11:44:52 -06:00
Gregory Nutt
1b5e296489 Add sys/custom_file.h. Used when CUSTOM_FILE_IO is define and avoids re-definition errors about the FILE define. From Thomas Gruber via the PX4 repository 2014-12-06 12:10:08 -06:00
Gregory Nutt
ad05793c0f msg type should be char * not void * in mq_send, mq_timedsend, mq_receive, and mq_timedreceive. Noted by Pierre-Noel Bouteville 2014-12-05 19:16:14 -06:00
Gregory Nutt
c0c108d5e2 Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet 2014-12-05 09:13:34 -06:00
Gregory Nutt
76906110b0 Correct spelling: MOUNTPOINT not MOUNTPOUNT. Numerous places. Some are problems. From Woohan Lee 2014-12-01 06:41:30 -06:00
Gregory Nutt
7ad7163bd3 Updated comments 2014-11-29 17:39:40 -06:00
Gregory Nutt
1fa790cf8e Update comments 2014-11-29 15:28:28 -06:00
Gregory Nutt
ba58b37e46 Re-arrange the AJOYSTICK data structure so that it matches the mouse structure 2014-11-29 13:26:26 -06:00