Make use of XCHG/BSWAP on x86, REV16 and REV on ARMv6-m and above,
and whatever other optimized instructions on other platforms.
Defines extra CONFIG variables, and removes the unused functions for
endian-swapping. Fixes some oversights in using the macros.
In order to support multiple LCD instances per board, add a pointer from
lcd_planeinfo_s to the lcd_dev_s which it belongs to. Also enhance the
putrun, getrun, putarea and getarea methods to pass through the
lcd_dev_s pointer to the respective device driver.
Port all LCD device drivers to this lcd_planeinfo_s extension.
Enhance SSD1306 driver to support multiple LCDs.
Signed-off-by: Michael Jung <michael.jung@secore.ly>
the definition of MSG_NOERROR and IPC_NOWAIT should not be aligned
------------------------------------------------------------------
MSGOP(2)
NAME
msgrcv, msgsnd - System V message queue operations
...
EXAMPLE
The program below demonstrates the use of msgsnd() and msgrcv().
...
if (msgrcv(qid, (void *) &msg, sizeof(msg.mtext), msgtype,
MSG_NOERROR | IPC_NOWAIT) == -1) {
...
Signed-off-by: chao.an <anchao@xiaomi.com>
since devif_timer has been removed in:
commit 035d925864
Author: zhanghongyu <zhanghongyu@xiaomi.com>
Date: Sun May 29 21:47:28 2022 +0800
devif: remove all devif_timer
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
A device driver based on drivers/net/skeleton.c, which uses the W5500 in
MACRAW mode (i.e. bypassing the integrated protocol stack).
Signed-off-by: Michael Jung <michael.jung@secore.ly>
The driver is provided by Spresense SDK
ISX019 has the DOL-HDR feature, which combines images with different exposure so that
both bright and dark data of high-contrast subject can be viewed at the same time.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Change pin initialization timing for camera from board power on to camera device
power on for the following purposes.
- avoid unnecessary power consumption
- Make the corresponding pins available for other uses when camera is not in use
since the code could map the unsupported work to the
supported one and remove select SCHED_WORKQUEUE from
Kconfig since SCHED_[L|H]PWORK already do the selection
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
For CONFIG_BUILD_KERNEL using the sched/task/task_exithook implementation
will just not work. It calls user code with kernel privileges which is
a bit of a security issue.
The current SAMv7 PWM driver assumes that all PWM channels should
work in sync mode, but that is a partial case of a generic PWM
driver operation.
Start SAMv7 PWM channels in async mode. The sync mode should be
implemeted either using ioctl command or via a separate Kconfig
option.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
