sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
26,531 Commits 1 Branch 0 Tags 291 MiB
59f626313d
Commit Graph

12068 Commits

Author SHA1 Message Date
Gregory Nutt
59f626313d Changes from review of last PR 2016-07-25 15:16:51 -06:00
Gregory Nutt
250b9d5597 Merged in JordanMacIntyre/nuttx/PWM_driver (pull request #106) 
Pwm_driver
 2016-07-25 14:59:45 -06:00
jmacintyre
f5ea811c97 create PWM driver, still having issues with building 2016-07-25 14:17:07 -05:00
Stefan Kolb
899a8aa2f0 SAMV7 TRNG: Missing endif. 2016-07-25 12:30:39 -06:00
Gregory Nutt
e895e19b9f Minor changes from review of last PR 2016-07-24 07:45:46 -06:00
Wolfgang Reissnegger
c0fa319f2b SAM3/4 UDP: Fix handling of endpoint RX FIFO banks. 
This fixes a race condition where the HW fills a FIFO bank while the SW is
busy, resulting in out of sequence USB packets.
 2016-07-23 20:11:04 -07:00
Wolfgang Reissnegger
cc191a977d SAM3/4 UDP: Remove redundant EP state assignment. 2016-07-23 20:11:03 -07:00
Wolfgang Reissnegger
f3a6a40f62 SAM3/4 Serial: Fix warning when CONFIG_SUPPRESS_UART_CONFIG is set. 2016-07-23 16:23:49 -07:00
Gregory Nutt
9b9b721406 Rename alarm_enable to rtc_alarm_enabled; mark inline 2016-07-23 12:01:57 -06:00
Gregory Nutt
5a0f9fcb7d Fix STM32 RTC Alarm interrupts. They were being enabled BEFORE the interrupt system was being initialized. 2016-07-23 10:36:06 -06:00
Gregory Nutt
14de4b99f8 Simplify some computations 2016-07-23 08:13:25 -06:00
Gregory Nutt
0984fcda44 Back out last RTC alarm changes. I am mistaken, the interrupts are enabled by stm32[l4]_exti_alarm(). 2016-07-23 07:53:08 -06:00
Gregory Nutt
65ac11692d STM32L4 RTC is cloned from F4; needs same fix. 2016-07-23 07:33:44 -06:00
Gregory Nutt
829c5610da STM32 F4 RTC ALARM: Was not enabling interrupts. 2016-07-23 07:19:14 -06:00
Gregory Nutt
e77872057d Fix up a few remaining incorrect CONFIG_GPIO_IRQ 2016-07-22 15:01:00 -06:00
Gregory Nutt
e897ccb940 Rename x86 QEMU version of CONFIG_GPIO_IRQ to CONFIG_QEMU_GPIOIRQ 2016-07-22 14:54:00 -06:00
Gregory Nutt
5a9519d636 Rename HCS12 version of CONFIG_GPIO_IRQ to CONFIG_HCS12_GPIOIRQ 2016-07-22 14:53:17 -06:00
Gregory Nutt
c00ad93165 Rename HC version of CONFIG_GPIO_IRQ to CONFIG_HCS12_GPIOIRQ 2016-07-22 14:46:54 -06:00
Gregory Nutt
e6137ff129 Rename SAMD/L version of CONFIG_GPIO_IRQ to CONFIG_SAMDL_GPIOIRQ 2016-07-22 14:38:33 -06:00
Gregory Nutt
3aea9b8bf3 Rename KL version of CONFIG_GPIO_IRQ to CONFIG_KL_GPIOIRQ 2016-07-22 14:34:21 -06:00
Gregory Nutt
5386403476 Rename Kinetis version of CONFIG_GPIO_IRQ to CONFIG_KINETIS_GPIOIRQ 2016-07-22 14:30:37 -06:00
Gregory Nutt
264578135d Rename LP11xx version of CONFIG_GPIO_IRQ to CONFIG_LPC11_GPIOIRQ 2016-07-22 14:23:31 -06:00
Gregory Nutt
360efe03c1 Rename LP17xx version of CONFIG_GPIO_IRQ to CONFIG_LPC17_GPIOIRQ 2016-07-22 14:18:30 -06:00
Gregory Nutt
369c942605 uint8_t is big enough for global. Range of values only 2-10 2016-07-21 15:18:27 -06:00
Gregory Nutt
67900beaaa LP43 Heap: REALLY eliminate the warning this time 2016-07-21 15:15:56 -06:00
Gregory Nutt
d5acc120a4 Kinetis K60: Fix some bad conditional compilation 2016-07-21 14:22:00 -06:00
Gregory Nutt
a2035f7efd Move include/nuttx/1wire.h to include/nuttx/drivers/1wire.h 2016-07-21 13:51:28 -06:00
Gregory Nutt
96d5b734a8 Add missing TWI definitions 2016-07-21 08:01:59 -06:00
Gregory Nutt
0d98507af1 Eliminate a warning 2016-07-20 16:47:23 -06:00
Gregory Nutt
ee9c66186c ramdisk.h moved from include/fs/nuttx/ to include/nuttx/drivers. 2016-07-20 14:02:18 -06:00
Gregory Nutt
1b9b3a7b47 pwm.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:48:24 -06:00
Gregory Nutt
ddcaa3d425 can.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:38:36 -06:00
Gregory Nutt
4b4dbc79a2 Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h 2016-07-20 13:15:37 -06:00
Sagitta Li
e07bd757ba STM32 F107: TIM8 not supported in F105/F107 2016-07-20 08:51:03 -06:00
Ken Pettit
b926334a19 Add file was not included in the original commit 2016-07-19 10:39:43 -06:00
Vytautas Lukenskas
ac2a5e079c Add change missing in Make.defs for last LPC43xx change 2016-07-19 09:28:15 -06:00
Gregory Nutt
8eeecff79d Replace some C99 comnents with C89 comments 2016-07-19 08:19:53 -06:00
Ken Pettit
148cf1ac22 Adds the simulated QSPI (N25Q) flash to the simulation and modify sim up_spiflash.c to enable it to run with different MTD drivers based on config options (currently m25p, sst26 and w25). 2016-07-19 07:33:44 -06:00
Vytautas Lukenskas
f222d37aa7 Extend LPC43xx EMC code to support SDRAM on a dynamic memory interface. 2016-07-19 07:11:04 -06:00
Gregory Nutt
2119c5ce19 Fix another function naming error 2016-07-18 12:40:27 -06:00
Gregory Nutt
d36da2b560 Fix bad dev[u]random_register() function return value. 2016-07-18 12:25:05 -06:00
Gregory Nutt
d5388eca05 devrandom_register() must be called before devurandom_register() 2016-07-18 11:24:04 -06:00
Gregory Nutt
078bbe5e5c All H/W RNG Drivers: Can now be configured to register as /dev/random and/or /dev/urandom 2016-07-18 11:10:37 -06:00
Gregory Nutt
1660329d06 Rename up_rnginitialize to devrandom_register 2016-07-18 10:55:37 -06:00
Gregory Nutt
fe315f867a Costmetic 2016-07-17 17:01:35 -06:00
Gregory Nutt
006f4a5818 HOSTFS: Fix some errors in first cut at repartitioning 2016-07-17 16:31:14 -06:00
Gregory Nutt
2b28a1f3e5 SIM HOSTFS: First cut at changes to get it working on Cygwin. 2016-07-17 15:59:45 -06:00
Gregory Nutt
76dc238baf Add more name mappings to nuttx-names.dat 2016-07-17 09:44:27 -06:00
David Alessio
6cefbc0c3f This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write. 2016-07-17 06:42:26 -06:00
Alan Carvalho de Assis
91ba0be667 Enable TERMIOS support in stm32discovery/pseudoterm configuration 2016-07-16 17:49:37 -06:00