so the source code compiled by host environment can include config.h
directly and then avoid pass Kconfig option through Makefile manually
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic9fe6f846082cef2d0808dc717df8ae6ed929edf
This information there is outdated and some of its content should be in
the board documentation and not the chip.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Error: wqueue/kwork_thread.c:202:3: error: format '%x' expects argument of type 'unsigned int',
but argument 4 has type 'long unsigned int' [-Werror=format=]
snprintf(args, 16, "0x%" PRIxPTR, (uintptr_t)wqueue);
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
Summary:
- I noticed that the ntpclient does not work with gs2200m
- Finally, I found that the address family for recvfrom() is not
set correctly
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with ntpclient
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
PWM drivers currently use channel number 0 for the channels that are not
used by the application. This commit adds number -1 which indicates that
all following channels are not configured and that the loop can be broken.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
arch/arm/src/stm32/Kconfig:
* In configs STM32_ADC_MAX_SAMPLES, STM32_FOC_HAS_PWM_COMPLEMENTARY:
Fix typos in help text.
arch/arm/src/stm32h7/Kconfig:
* In configs STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY,
STM32H7_FLASH_CR_PSIZE, STM32H7_RTC_LSECLOCK_START_DRV_CAPABILITY,
and STM32H7_RTC_LSECLOCK_RUN_DRV_CAPABILITY: Fix typos in help text.
arch/arm/src/stm32l5/Kconfig:
* In configs STM32L5_FLOWCONTROL_BROKEN, STM32L5_SDMMC1_DMAPRIO: Fix
typos in help text.
arch/arm/src/stm32/hardware/stm32_exti.h:
* Change STM32_EXTI2_OFFSET (offset to EXTI2 registers) from 0x18
to 0x20. This symbol is defined when CONFIG_STM32_STM32F30XX or
CONFIG_STM32_STM32F33XX. According to the current reference
manuals for STM32F334xx (RM0364 rev 4) and STM32F302xx (RM0365
rev 8), EXTI_IMR1 is at offset 0x00 and EXTI_IMR2 is at offset
0x20, i.e., 0x20 apart. The same offset applies to the rest of
the registers: EMR1/EMR2, RTSR1/RTSR2, etc.
BOARDIOC_SWITCH_BOOT is required to communicate the boot partition from
userspace (OTA subsystem) to board. It can be used to change the system
boot behavior. So it's useful for A/B boot or even single boot case.
For the board support A/B boot case:
1. Download the new image from the sever
2. Write the new image to the alternative partition
3. Call BOARDCTL_SWITCH_BOOT to the alternative system
For single boot partition case:
1. Download the new image from the sever
2. Call BOARDCTL_SWITCH_BOOT and reboot to a small system
3. Write the new image to the main partition in the small system
4. Call BOARDCTL_SWITCH_BOOT again to the main system
Change-Id: Ifebb495784ecf06842946a249bec64f75dce894f
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
Summary:
- I noticed that sim:smp does not work correctly on macOS
due to the recent changes
- Actually, it can not receive the IPI host signal, so if
a new task is scheduled on CPU1/2/3, it hangs.
- Finally, I found that sim_cpu_start() calls pthread_attr_init()
which locates not on the host OS but on the NuttX
- This commit fixes this issue by adding the symbol names
to nuttx-names.in
Impact:
- sim in SMP mode
- NOTE: stack usage for CPU1/2/3 IDLE is still incorrect on macOS
Testing:
- Tested with ostest on Ubuntu 18.04 (x86_64) and macOS 11.4 (x86_64)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
since this macro isn't check from host side after:
commit cee43ce280
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Fri Jul 16 02:23:59 2021 +0800
arch/sim: Initialize the idle thread stack info correctly
and change the default value of IDLETHREAD_STACKSIZE to 65536
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that sim:smp does not work correctly on macOS
due to the recent changes
- Actually, it can not receive the IPI host signal, so if
a new task is scheduled on CPU1/2/3, it hangs.
- Finally, I found the issue depends on pthread stack settings
and perhaps it might affect the host signal handling.
- This commit fixes this issue by just reverting the pthread
stack setting only for macOS.
Impact:
- sim:smp on macOS
- Stack usage for CPU1/2/3 IDLE will be incorrect
Testing:
- Tested with ostest on macOS 11.4 (x86_64)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Cleaning during `clean_context` had the issue of remaking everything
when `menuconfig` was issued. That's because `menuconfig` has a
`clean_context` on its way.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
The libcxx-X.Y.Z.src.tar.xz contains a symbolic link to a directory
that not exist as below.
`libcxx-X.Y.Z.src/test/std/pstl -> ../../../pstl/test/std`
Linux and macOS environment have no problem, but it causes an error
when extracting tarball on Windows platform. This symbolic link is not
actually used, so exclude it from extracting the tarball.
Summary:
- I noticed that nuttx-gdbinit does not work.
- Finally, I found that the g_pidhash had been changed recently.
- This commit fixes this issue.
Impact:
- None
Testing:
- Tested with lm3s6965-ek:discover (QEMU)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
