sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
43,868 Commits 1 Branch 0 Tags 291 MiB
5c5f1dec08
Commit Graph

43868 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Petro Karashchenko
48c7fa6e92 boards/arm/samv7/common: add HSMCI0 boot mount configuration option 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-01-24 01:08:20 +01:00
Petro Karashchenko
c0881feca9 boards/arm/samv7/same70-qmtech: fix description in README.txt 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-01-23 20:08:10 -03:00
Petro Karashchenko
311f351da5 boards/arm/samv7/same70-qmtech: enable slow crystal 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-01-23 22:00:45 +01:00
Huang Qi
71d3ff1045 arch/risc-v: Remove g_serial_ok 
`WFI` is enough to wait the ready signal from master core,
so we can remove it.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-01-23 18:28:37 +08:00
Huang Qi
422e005183 arch/risc-v: Move xxx_cpustart.c to common 
It's a common solution for MSIP and IPI based risc-v smp soc,
also works on qemu-rv smp (WIP).

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-01-23 18:28:37 +08:00
Norman Rasmussen
da5659138b Fix regression where used code was marked as unused 
Commit 5d1a444812 replaced __attribute__
((unused)) with unused_code but two instances of __attribute__ ((used))
were also incorrectly replaced. Add used_code/used_data and used them
instead.
 2022-01-23 14:57:19 +08:00
raiden00pl
4c2dd3924a include/nuttx/can.h: rename CAN_ERR_CTRL to CAN_ERR_CRTL for compatibility with libcanutils 2022-01-23 01:34:34 +08:00
raiden00pl
7d39642561 include/nuttx/can.h: make SocketCAN error definitions always available 2022-01-23 01:34:34 +08:00
Petro Karashchenko
6c27f3c19d toolchain: add libm to EXTRA_LIBS only if it is provided by the compiler 
Some toolchains may be built without libm support, but using
such toochain should not generate any errors in case if math
functions are not used in the program

Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-01-22 15:36:29 +08:00
Alexander Lunev
f73abc76d5 sim/netdev: retrieve all the queued RX frames from the network device on every poll. 
As a result, the RX throughput is increased significantly w/o harming the TX throughput.
 2022-01-22 15:34:58 +08:00
Xu Xingliang
021363f1db driver/mmcsd: add option to limit block count in multiple-block transfer mode. 
Signed-off-by: Xu Xingliang <xuxingliang@xiaomi.com>
 2022-01-22 14:59:26 +08:00
Petro Karashchenko
d611e2d99b risc-v/mpfs: switch to NuttX types for opensbi 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-01-22 14:58:56 +08:00
Petro Karashchenko
ea177faaf6 boards/same70-qmtech: clarify usage of CD signal on SD card connector 
By default SAME70_QMTECH board does not have CD signal routed to
SAME70.  The HW rework can be done to enable CD signal.  Clarify
description of SD card connector.
Change configuration of CD pin to get auto unmount work correctly

Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-01-22 14:57:36 +08:00
Huang Qi
b803919b9d arch/risc-v: Merge mcause.h into irq.h 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-01-22 14:57:05 +08:00
Alexander Lunev
eec94132c4 net/tcp/sendfile: removed excessive overwrites of conn->sndseq 
(conn->sndseq was updated in multiple places that was unreasonable and complicated).
This optimization is the same as it was done for tcp_send_unbuffered.
 2022-01-22 00:43:53 +08:00
Jukka Laitinen
9061c92ec8 arch/risc-v/src/mpfs: Make each hart entry configurable for bootloader 
Add two config flags for each hart for a bootloader nuttx:

CONFIG_MPFS_HARTx_SBI :
- select whether the hart boots via opensbi or not.

CONFIG_MPFS_HARTx_ENTRYPOINT :
- the target address to jump to, either directly from startup code or
  from SBI if CONFIG_MPFS_HARTx_SBI is set

This allows building a nuttx based bootloader application, which can load
different applications/OSs for individual harts and jump to those

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-01-22 00:43:05 +08:00
Jukka Laitinen
36b73fd0a3 arch/risc-v/src/mpfs/mpfs_opensbi.c: Ensure stack alignment of 16 bytes 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-01-22 00:43:05 +08:00
Alexander Lunev
338b122b2b net/tcp/sendfile: fixed an issue with unackseq calculation. 
Wrong unackseq calculation locked conn->tx_unacked at non-zero values
even if all ACKs were received.
This issue is the same as it was with tcp_send_unbuffered.
 2022-01-22 00:42:29 +08:00
Alexander Lunev
c9e32dd4a4 tcp: fixed warning: ISO C90 forbids mixed declarations and code 2022-01-22 00:41:42 +08:00
Eero Nurkkala
2a22c0e32d risc-v/mpfs: OpenSBI: utilize an index2id table 
Hart index to hart id table is used to track unused and used harts. This
table is useful when configuring only some of the harts for OpenSBI use.
Mpfs will always have the hart0 unused, so mark it with -1.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2022-01-21 13:40:58 -03:00
Abdelatif Guettouche
8c582c27b8 esp32c3_irq.c: Add a comment explaining the assigment of CURRENT_REGS to 
regs.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-01-22 00:38:43 +08:00
Abdelatif Guettouche
e335d44028 esp32c3_irq.c: Skip over ECALL instruction. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-01-22 00:38:43 +08:00
zouboan
a310b0952f bug patch for frexpf function 2022-01-21 13:37:37 -03:00
Petro Karashchenko
a32381ca32 Revert "risc-v/mpfs: switch to NuttX types for opensbi" 
This reverts commit 1dccc374ab.
 2022-01-21 21:38:31 +08:00
YAMAMOTO Takashi
f356ff34a7 arch/sim/src/sim/up_macho_init.c: Fix an assertion 
Handle the case of no constructors.
 2022-01-21 11:01:53 +01:00
Petro Karashchenko
1dccc374ab risc-v/mpfs: switch to NuttX types for opensbi 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-01-21 17:12:22 +08:00
zouboan
0342272e5a up_progmem_erasesize for stm32f20xxf40xx_flash.c 2022-01-21 14:57:32 +08:00
Huang Qi
d846bb0235 arch/risc-v: Remove dupped irq code from mpfs 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-01-21 00:44:43 +08:00
Huang Qi
6dc4dd207f arch/risc-v: Remove dupped irq code from rv32m1 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-01-21 00:44:43 +08:00
Huang Qi
089dc2e090 arch/risc-v: Remove dupped irq code from litex 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-01-21 00:44:43 +08:00
Huang Qi
d1edd887d5 arch/risc-v: Remove dupped irq code from c906 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-01-21 00:44:43 +08:00
Huang Qi
bd57229f3c arch/risc-v: Remove dupped irq code from bl602 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-01-21 00:44:43 +08:00
Huang Qi
8532feda78 arch/risc-v: Remove dupped irq code from fe310 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-01-21 00:44:43 +08:00
Huang Qi
e81439a367 arch/risc-v: Remove dupped irq code from k210 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-01-21 00:44:43 +08:00
Huang Qi
7738bb98fc arch/risc-v: Remove dupped irq code from qemu-rv 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-01-21 00:44:43 +08:00
Huang Qi
f43d677c2e arch/risc-v: Unify common irq code to arch/irq.h 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-01-21 00:44:43 +08:00
Xiang Xiao
2935751bfd Fix error: implicit declaration of function 'up_cpu_index' 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-01-20 23:21:21 +08:00
Xiang Xiao
aa2cdcd848 xtensa/esp32: Change "cpu <= CONFIG_SMP_NCPUS" to "cpu < CONFIG_SMP_NCPUS" 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-01-20 23:21:21 +08:00
Xiang Xiao
77792a1598 sched: Define CONFIG_SMP_NCPUS to 1 in no SMP case 
to simplify the SMP related code logic

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-01-20 23:21:21 +08:00
Xiang Xiao
04297c3ca3 board: Remove -fno-omit-frame-pointer from Make.defs 
except sim arch, since this flag is set inside Toolschain.defs now

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-01-20 16:00:48 +01:00
Xiang Xiao
c5c50acb93 board: Remove -fstrict-volatile-bitfields 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-01-20 16:00:48 +01:00
Xiang Xiao
3e28192b2f board/bl602: Remove -fshort-enums 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-01-20 16:00:48 +01:00
Xiang Xiao
a9e4c6ace1 libc: backtrace_malloc change sprintf to snprintf 
since snprintf can handle NULL pointer but sprintf can't.

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-01-20 14:33:29 +01:00
Ville Juven
0a1a1e9b79 Fix user PGT flags (don't map them globally) 
A global mapping means it exists in all address environments. Only
kernel mappings should be mapped as global.
 2022-01-20 20:30:13 +08:00
Ville Juven
56ade25f31 Add pte getter to RISC-V MMU driver 
Like the title says, a getter to read one PTE.
 2022-01-20 20:30:13 +08:00
Ville Juven
c4b3672937 RISC-V MMU driver: fix region setting for L1/L2 page tables 
The region setting worked for L3 (Sv39) entries only. This fixes the
procedure so that L1 (Gigapages) or L2 (Megapages) can be also set
with it.
 2022-01-20 20:30:13 +08:00
Ville Juven
e676d2985d Present common MMU flags in common MMU driver header 
Flags to use for intermediate page tables, as well as leaf entries
 2022-01-20 20:30:13 +08:00
Ville Juven
33435e76da Changes to Sv39 MMU driver public header 
- Define RV_MMU_PT_LEVELS as the arch max
- Add way to find the PPN from a PTE
- Make utility function to create a satp register value, instead of
  combining this to mmu_enable
- Add function to read the current satp value
- Add function to write the satp register, also fix the fence instruction
 2022-01-20 20:30:13 +08:00
Ville Juven
926a19217e Add simple MMU driver for RISC-V (Sv39) 
Sv39 is the only mode supported for now. However, it should be trivial
to extend the driver to support the other modes (including Sv32) as well.

The driver is tested with mpfs only, but it should work with any riscv
implementation.
 2022-01-20 20:30:13 +08:00
Juha Niskanen
2b63b811e0 libs/libc/misc/lib_execinfo.c: fix bad memory access 
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
 2022-01-20 18:58:40 +08:00