sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3,807 Commits 1 Branch 0 Tags 291 MiB
5e92347d60
Commit Graph

3807 Commits

Author SHA1 Message Date
Gregory Nutt
c7055a4cb8 SAMA5D4-EK: Add WM8904 initialization logic 2014-07-19 11:58:53 -06:00
Gregory Nutt
8055a59d49 SAMA5 LCDC: Back out the delay kludge. Increase the LCDC input clock from MCK to 2*MCK was sufficient for all timing instbility problems 2014-07-12 11:24:14 -06:00
Gregory Nutt
424d47cfee SAMA5D4-EK LCDC: Change source clock to 2*Mck seems to solve stability issues 2014-07-12 09:45:05 -06:00
Gregory Nutt
30603b1021 SAMA5D4-EK LCDC: Adding a delay after enabling the LCD solves lots of start-up timing issues 2014-07-12 08:05:22 -06:00
Gregory Nutt
20493f1212 Lpc17xx Ethernet: Comment out an assertion that is reported to first inappropriately. From Max 2014-07-11 12:25:11 -06:00
Gregory Nutt
67468408ae SAMA5D4-EK LCD: Actual hardware with appears to be RGB888 2014-07-10 12:23:41 -06:00
Gregory Nutt
c7d53cb927 SAMA5D4-EK: LCDC works (with a few color problems) 2014-07-10 12:03:10 -06:00
Gregory Nutt
6563ae07c2 Don't have to set SDA high initially in I2C reset because that is done by the pin configuration 2014-07-09 17:17:32 -06:00
Gregory Nutt
fc973eb512 SAMA5 PIO: Fix a typo in Schmitt trigger configuration; Configure pin as a a vanilla input first so that final pin configuration is more read-able (i.e., easier to debug) 2014-07-09 17:16:43 -06:00
Gregory Nutt
0d4255257d SAMA5 I2C Reset: More changes... still does not work right 2014-07-09 15:09:06 -06:00
Gregory Nutt
c1ca11331d SAMA5 TWI: Some restructured needed by up_i2creset. Also timeout needs to vary with the size of the transfer and if debug is on or not 2014-07-09 13:39:10 -06:00
Gregory Nutt
ee351dc695 Use sam_pio_forceclk() so that we can read the current state of an open-drain output in the TWI reset logic. 2014-07-09 11:31:21 -06:00
Gregory Nutt
c4b9eaa01f Add a new interface sam_pio_forceclk() that can be used to force PIO clocking on. I am afraid I was too conservative with PIO clocking in the initial design; this is the price 2014-07-09 11:26:07 -06:00
Gregory Nutt
6c4f57b0dc SAMA5 TWI: Add support for up_i2creset 2014-07-09 09:51:28 -06:00
Gregory Nutt
446d9daa94 SAMA5D4 LCDC: Adapt the SAMA5D3 LCDC driver to work with the SAMA5D4 which has no hardware cursor 2014-07-08 12:45:16 -06:00
Gregory Nutt
8bc8a86b90 SAMA5D3/4 HEAP: Add a configuration option to reserve DRAM for a framebuffer when executing out of DRAM. 2014-07-08 12:43:38 -06:00
Gregory Nutt
3fe95f83de Fix some cloned errors in SAM GPIO interrupt setup 2014-07-07 15:54:37 -06:00
Gregory Nutt
14c90921b3 SAMA5D3/4: Fix two issues associated with PIO interrupts 2014-07-07 14:16:29 -06:00
Gregory Nutt
ae95f4e4d2 SAMA5D3/4 I2C: Test for read or write operation was reversed. How could this have worked before? 2014-07-07 09:54:43 -06:00
Gregory Nutt
194f9721f7 SAM3/4: Fix compile of sam_aes.c if CONFIG_CRYPTO_AES is defined. rom Max Nekludov 2014-07-07 08:03:18 -06:00
Gregory Nutt
56629f7fde maXTouch: Fix test of I2C_TRANSFER return value 2014-07-06 08:51:38 -06:00
Gregory Nutt
87055cff08 NET: Standardize naming of all protocal header lengths 2014-07-05 13:04:48 -06:00
Gregory Nutt
d7fe256821 NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
99ce3a44d7 Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
11e3a21411 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
77439f3c75 AMA5 OHCI: Pointers to allocated port values were not being nullified after being deallocated. This caused some assertions when debug was enabled 2014-07-04 08:17:14 -06:00
Gregory Nutt
1211bbd904 Move crypto header files from include/crypto to include/nuttx/crypto 2014-07-03 18:35:08 -06:00
Gregory Nutt
ca1d7d0f32 Correct authorship on a few files 2014-07-03 18:28:26 -06:00
Gregory Nutt
dfb5bc1413 NET: More renaming 2014-07-03 17:53:16 -06:00
Gregory Nutt
d3357f81f5 Rename apps/examples/uip to apps/examples/webserver 2014-07-03 17:31:17 -06:00
Gregory Nutt
2bd5963622 SAMA5 OHCI: Fix an error in a DEBUGASSERT statement. Caused assertion to fire inappropriately when a low- or full-speed device is removed and CONFIG_DEBUG=y 2014-07-03 13:06:28 -06:00
Gregory Nutt
8b2fb4725b SAMA5D3/4: UPLL divisor to generate 48MHz for OHCI is different from the two families. No idea why. 2014-07-03 12:28:11 -06:00
Gregory Nutt
68f83f973e CCM PROCFS: Changed the configuration a bit. I am still not happy about the coupling between procfs, mtd, and now STM32 2014-07-03 08:50:24 -06:00
Gregory Nutt
954048b8e9 Add STM32 CCM heep procfs 2014-07-03 08:18:24 -06:00
Gregory Nutt
7f5ea07329 Move cypto debug definitions to debug.h with other susbsystem-level debug 2014-07-03 07:58:43 -06:00
Gregory Nutt
1c0054114e Beginning of a crypto/ subsystem from Max Neklyudov 2014-07-03 07:42:44 -06:00
Gregory Nutt
4c03534f9c SAM4 AES driver from Max Neklyudov 2014-07-03 07:26:44 -06:00
Gregory Nutt
fb44a97359 SAM Ethernet: Eliminate a warning 2014-07-02 17:35:41 -06:00
Gregory Nutt
596dbc20ef SAMA5D4-EK: NSH should run at 528MHz 2014-07-02 15:31:52 -06:00
Gregory Nutt
30fc821bc8 SAMA5D4-EK: NSH configuration now has TWI0 enabled and supports the I2C tool 2014-07-02 13:51:57 -06:00
Gregory Nutt
a420171a4a SAMA5D4 EMAC: Add a kludge to work around a suspected hardware issue 2014-07-02 12:17:01 -06:00
Gregory Nutt
e7aa949380 SAM3/4 and SAMA5 Ethernet: Fix an error in the function that determines the number of free TX descriptors 2014-07-02 10:40:11 -06:00
Gregory Nutt
f5abca3952 SAMA54D-EK: Don't disable any features in the NSH configuration. Comments updated in several files 2014-07-02 08:54:53 -06:00
Gregory Nutt
313982ba18 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
a2507acab8 SAMA5D4: Add a configuration option to force EMAC driver debug 2014-07-01 18:00:39 -06:00
Gregory Nutt
289dc6dc71 SAMA5D4: Fix error in EMAC driver (plus related EMAC/GMAC drivers) 2014-07-01 11:22:19 -06:00
Gregory Nutt
621ec21bfd Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
ade8807a61 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
c5f2ec1637 Fix typo/compile error introduced with last HSMCI changes 2014-06-30 16:08:29 -06:00
Gregory Nutt
d8f4b29d5f SAM3/4: Important bugfix. Values read from PIO input pins do not change unless clocking to the PIO block is enabled 2014-06-30 14:26:09 -06:00
Gregory Nutt
03f3f8966c SAMA5D3/4: Fix some logic in conversion of physical and virtal DRAM addresses when running out of DRAM 2014-06-30 11:04:34 -06:00
Gregory Nutt
f6a3d4b728 SAMA5D4: Don't touch ISLR unless PIO is configured as an interrupt 2014-06-30 09:17:42 -06:00
Gregory Nutt
3010eddf11 STM32: Add configuration support fort he STM32F103RC. From Kosma Moczek 2014-06-30 08:16:17 -06:00
Gregory Nutt
ed02593af7 STM32: Reorder MCUs in choice menu; remove duplicates. From Kosma Moczek 2014-06-30 08:13:12 -06:00
Gregory Nutt
48e6f0ba78 STM32: Move temperature ranges from chip selection configuration prompts. From Kosma Moczek 2014-06-30 08:09:19 -06:00
Gregory Nutt
bfff6190d0 Unconfigure GPIO pins when closing a serial port to prevent back effects from back-powering on the TX pin. From Kosma Moczek 2014-06-30 08:02:26 -06:00
Gregory Nutt
a095b1b260 Make variable definitions 'static const' when possible to save RAM usage. From Kosma Moczek 2014-06-30 07:39:51 -06:00
Gregory Nutt
c4ace8244d Fix typos in debug statements 2014-06-30 07:38:02 -06:00
Gregory Nutt
ce710bb94a SAMA5 PIO: Add support for secure interrupts; Fix PIO debug output 2014-06-29 17:46:55 -06:00
Gregory Nutt
e681a582a7 SAMA5: Remove kruft in PIO header file 2014-06-29 17:45:42 -06:00
Gregory Nutt
70fa9ad81d SAMA5D4 HSMCI: Fix a compiler in a debug statement 2014-06-29 12:01:08 -06:00
Gregory Nutt
1384148415 SAMA5D4 XDMA: Fix some typos 2014-06-29 11:24:57 -06:00
Gregory Nutt
9fab30e3b5 Fix system bus IDs for SAMA5D4; Don't use explicit PERIPHID_SHIFT for symmetry with memory 2014-06-29 11:24:10 -06:00
Gregory Nutt
d4f27b9e08 SAMA5D: Don't use explicit DMACH_FLAG_MEMPID_SHIFT; it does not exist in the SAMA5D4 2014-06-29 09:52:07 -06:00
Gregory Nutt
7c8c583722 SAMA5: Add configuration to assign an XDMAC channel to an HSMCI 2014-06-29 08:43:46 -06:00
Gregory Nutt
b7fad79a1d SAMA5D4-EK: Updates to get the at25boot configuration building correctly 2014-06-28 09:39:50 -06:00
Gregory Nutt
1bfa27887e Add more XMega skeleton directories 2014-06-27 18:34:52 -06:00
Gregory Nutt
71df742121 Add skeletin of XMega include 2014-06-27 18:22:55 -06:00
Gregory Nutt
e4990dda4d Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00
Gregory Nutt
72d8a6a7ef SAM4CM: Fixes from Macs N 2014-06-27 12:27:02 -06:00
Gregory Nutt
b26d5d2191 SAM4CM: Add IPC register header file. From Macs N 2014-06-27 12:02:30 -06:00
Gregory Nutt
f8e5e82402 Add support for a network device IOCTL to access PHY registers. Ioctls only implemented for STM32. From Lazlo 2014-06-27 09:30:41 -06:00
Gregory Nutt
6a451baa51 SAMA5D4: Add configuration to redirect all interrupts to the AIC 2014-06-26 11:51:39 -06:00
Gregory Nutt
fd7b06c68e STM32 I2C reset. Add missing GPIO configuration. From Alex D 2014-06-25 16:08:31 -06:00
Gregory Nutt
ff97ad1245 Clean-up packet socket naming 2014-06-25 10:34:52 -06:00
Gregory Nutt
57383ea2f3 Rename ip_eth_hdr to eth_hdr_s 2014-06-25 09:57:52 -06:00
Gregory Nutt
fae790a6dc Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
Gregory Nutt
11896e1481 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
b34a1f1e01 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
00667926a9 Move include/nuttx/net/uipopt.h to include/nuttx/net/netconfig.h 2014-06-24 08:53:28 -06:00
Gregory Nutt
eb340e683f Add support for the LPCXpresso's RTC, ADC, DAC, Timer, PWM, and MCPWM. All form Max 2014-06-23 12:13:52 -06:00
Gregory Nutt
319ca7c2ce Fix typos in AVR32 Kconfig files. From Stefan Sperling 2014-06-23 11:20:33 -06:00
Gregory Nutt
4e3c794363 SAMA5D4: Add missing mappings for the VDEC and L2CC memory regions 2014-06-21 14:25:47 -06:00
Gregory Nutt
4b9666658e Correct type of SAMA5 arm_decodefiq() return value 2014-06-21 10:34:35 -06:00
Gregory Nutt
0a134f0158 Need to enable FIQ in initial task state; Improve H32/64 test in IRQ handling 2014-06-21 09:55:09 -06:00
Gregory Nutt
40b7ddf68e SAMA5: FIQs should be disabled along with IRQs on most exeptions in most configuratinons. arm_decodefiq and arm_decodeirq are mutually exclusive and, hence, can use the same interrupt stack 2014-06-20 18:49:01 -06:00
Gregory Nutt
c68d2532be SAMA5D4: Add support for secure/FIQ interrupts; SAIC supports need to be be enabled unconditionally 2014-06-20 18:16:41 -06:00
Gregory Nutt
8f4f73884b SAMA5D4: Fix MATRIX32 base address 2014-06-20 18:15:13 -06:00
Gregory Nutt
8fb8774c26 SAMA5D4: Minor fixes to get working with SAMA5D3 again 2014-06-20 16:01:45 -06:00
Gregory Nutt
0a2133b57f SAMA5D4: Add partial support for secure interrupt controller (SAIC) 2014-06-20 15:22:00 -06:00
Gregory Nutt
aecddf9b52 SAMA5D4: USART peripheral clock appears to be MCK/2 2014-06-20 11:40:36 -06:00
Gregory Nutt
b31f34cf94 SAMA5D4-EK: Make sure that the H32MX divider is set; correct sense of bit driver red LED 2014-06-20 10:33:33 -06:00
Gregory Nutt
9869c9b50d SAMA5D4: Fix peripheral clocking macros: AIC and L2CC are continuously clocked 2014-06-19 15:52:42 -06:00
Gregory Nutt
c14d80ee25 SAMA5D4: Initial bring-up fixes 2014-06-19 14:16:36 -06:00
Gregory Nutt
ce390e12a8 Costmetic update to comments/README file 2014-06-18 17:40:06 -06:00
Gregory Nutt
902c1342b9 Cosmetic cleanup 2014-06-18 08:24:53 -06:00
Gregory Nutt
e2ede42d14 SAMA5D4: XDMAC driver now compiles error/warning free (still untested) 2014-06-17 16:31:09 -06:00
Gregory Nutt
4b3342fd96 SAMA5D4: More progress on XDMAC driver (still no complete); Also fixes some critical errors in the SAMA5D3 DMA definitions 2014-06-17 13:18:52 -06:00
Gregory Nutt
5d73322dc7 SAMA5D4: Correct MATRIX register addresses 2014-06-14 10:42:53 -06:00
Gregory Nutt
1a236c13de SAMA5D4: Implement SDRAM initialization 2014-06-14 10:42:26 -06:00