sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,811 Commits 1 Branch 0 Tags 291 MiB
5ee81c0d50
Commit Graph

1859 Commits

Author SHA1 Message Date
Gregory Nutt
089578319a STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane 2014-12-27 18:58:18 -06:00
Gregory Nutt
aefde565d3 Serial Upper Half: Add watermarks to RX flow control logic 2014-12-27 07:43:06 -06:00
Gregory Nutt
6daa9468f6 More RAMTRON related fixes from David Sidrane 2014-12-26 08:15:59 -06:00
Gregory Nutt
996d6c9d55 Most superstitous updates to the RAMTROM driver make it more compatibile with the version used by PX4. From David Sidrane 2014-12-26 07:59:09 -06:00
Gregory Nutt
fa5dffbc18 STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review 2014-12-19 14:52:17 -06:00
Gregory Nutt
7a874e5d4c ili9341: update interface control definitions 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:52:40 -06:00
Gregory Nutt
3ce3b168f8 stm32: Add interface description for ltdc controller. This defines the interface to perform hardware accelerated layer operation by the ltdc controller. 
The following methods must be supported by the implementation:

- gevideoinfo
- getplaneinfo
- getlid
- setclut
- getclut
- setcolor
- getcolor
- setcolorkey
- getcolorkey
- setalpha
- getalpha
- setblendmode
- getblendmode
- setarea
- getarea
- update

And if DMA2D is supported:

- blit
- blend

The method up_ltdcgetlayer provides access to a reference of a specific ltdc
layer.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:45:18 -06:00
Gregory Nutt
a1a2e53c3e Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis 2014-12-18 13:52:01 -06:00
Gregory Nutt
937f9f23f1 strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8. 2014-12-17 12:24:02 -06:00
Gregory Nutt
d818ab5e35 Update the ADXL345 interface following the current interface scheme 2014-12-16 11:45:28 -06:00
Gregory Nutt
c9ca51fc8a Minor clean-up associated with the ADX345 driver 2014-12-16 10:18:44 -06:00
Gregory Nutt
ae18f9dacd Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
10863af628 Add ADXL345 accelerometer driver. From Alan Carvalho de Assis 2014-12-16 08:16:53 -06:00
Gregory Nutt
16f5ea451b Fix cosmetic typo in header file idempotence. Note by Lazlo 2014-12-10 18:27:29 -06:00
Gregory Nutt
cb76fc05fc Lots of fonts that derive from X11-misc-fixed-* fonts. Converted for use by NuttX by Pierre-Noel Bouteville 2014-12-10 17:11:23 -06:00
Gregory Nutt
cdc8fc52d1 SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit 2014-12-09 14:11:15 -06:00
Gregory Nutt
69cb752813 Add CRC8 support. From Ken Pettit 2014-12-09 13:27:22 -06:00
Gregory Nutt
7f59a64f42 stdint.h: Don't use hex values to specify minimum values of fixed width, signed values. Hex values are inherently unsigned and not usable for this purpose in all contexts 2014-12-08 11:44:52 -06:00
Gregory Nutt
1b5e296489 Add sys/custom_file.h. Used when CUSTOM_FILE_IO is define and avoids re-definition errors about the FILE define. From Thomas Gruber via the PX4 repository 2014-12-06 12:10:08 -06:00
Gregory Nutt
ad05793c0f msg type should be char * not void * in mq_send, mq_timedsend, mq_receive, and mq_timedreceive. Noted by Pierre-Noel Bouteville 2014-12-05 19:16:14 -06:00
Gregory Nutt
c0c108d5e2 Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet 2014-12-05 09:13:34 -06:00
Gregory Nutt
76906110b0 Correct spelling: MOUNTPOINT not MOUNTPOUNT. Numerous places. Some are problems. From Woohan Lee 2014-12-01 06:41:30 -06:00
Gregory Nutt
7ad7163bd3 Updated comments 2014-11-29 17:39:40 -06:00
Gregory Nutt
1fa790cf8e Update comments 2014-11-29 15:28:28 -06:00
Gregory Nutt
ba58b37e46 Re-arrange the AJOYSTICK data structure so that it matches the mouse structure 2014-11-29 13:26:26 -06:00
Gregory Nutt
4657f5c870 Update some Documentation and comments associated with the last ioctl change 2014-11-29 13:25:29 -06:00
Gregory Nutt
e31d5125ae Add support for a variadic ioctl() function. The ioctl() interface is a non-standard, Unix interface. NuttX has always used the older, three-parameter version. Most contemporary systems now, however, use a variadic form of the ioctl() function. Added an option to insert a shim layer to adapt the three-parameter ioctl() to use the variadic interface form. Internally, the ioctl handling is the same three-parameter logic. The only real complexity to the shim is in how the system calls must be handled. 2014-11-29 10:53:22 -06:00
Gregory Nutt
19d31412f7 Update/correct some comments 2014-11-29 07:08:30 -06:00
Gregory Nutt
2b8fe6709b Add an analog joystick driver. Initial checkin is only a little more of a clone of the discrete joystick driver and is as-of-yet untested 2014-11-28 19:59:27 -06:00
Gregory Nutt
36ac0d2cf4 Add an interface definition header file for an analog joystick device 2014-11-28 19:27:42 -06:00
Gregory Nutt
544322edb9 DJoystick: Add a new ioctl to get the support joystick discrete signals 2014-11-28 15:39:57 -06:00
Gregory Nutt
421c81b315 STM3210E-EVAL: Add a DJoystick driver 2014-11-28 13:31:09 -06:00
Gregory Nutt
bd93ba55c5 Cosmetic change to comment 2014-11-28 09:06:05 -06:00
Gregory Nutt
5ddfdb2d8d cctype: Undefined macros defined ctype.h so that builtin C++ implementations will be used 2014-11-28 09:02:52 -06:00
Gregory Nutt
e42f7b552f This commit is a set of patches 02/11 through 03/11 correcting issues with the CC3000 networking (01/11 was committed separated). Among these 10 patches: 
03/11: CC3000 driver was getting stuck at recv() when remote host closed connection and application tried to read data from remotely shutdown socket. This patch adds proper handling for remotely closed socket event.

07/11: Socket state initialization was done in 'register', while it should be initialized in 'open' and deinitialized in 'close'. Old way caused problems when device is closed, power-cycled and then reopened as old socket state was left enabled.

08/11: Select thread was getting stuck after 'close, power-cycle, reopen', since selectsem was not properly setup and cleaned up.

09/11 'maxFD' was not properly reset in select worker and not checked for before calling cc3000_select().

10/11: After wlan_stop()/cc3000_close(), irqsem was left with count '-1'. Therefore on next wlan_start()/cc3000_open(), initial value for irqsem was wrong. Additional repeated wlan_start()/wlan_stop() decreased irqsem value further. Obviously this causes driver not to function correctly and freeze.

Patch moves initialization and destruction of waitsem, irqsem and readysem to cc3000_open/cc3000_close.

All are: Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
 2014-11-28 08:52:52 -06:00
Gregory Nutt
2d9bd07525 Some additional, minor improvements to djoystick interrupt controls 2014-11-27 20:20:10 -06:00
Gregory Nutt
0ec5043a4e Add an interface definition and upper half driver for a discrete joystick device 2014-11-27 17:42:16 -06:00
Gregory Nutt
a7b6369825 Two new fonts from Pierre-noel Bouteville 2014-11-26 14:15:34 -06:00
Gregory Nutt
40b27115cc Add support for generic EEPROM access via a character driver. Add also the EEPROM driver itself. From Sebastien Lorquet 2014-11-26 13:55:34 -06:00
Gregory Nutt
e0fc5a86c8 Fixes for more complaints from cppcheck 2014-11-25 08:09:57 -06:00
Gregory Nutt
e611859aed Fix typo in confiditional compilation. From Alan Carvalho de Assis 2014-11-23 16:51:02 -06:00
Gregory Nutt
c64cb19861 Move IP header flags from tcp.h to ip.h and rename IP_FLAGS vs TCPFLAGS. The problem fixed here is that there IP flags were not available when TCP was disabled. The IP flags are used in ICMP and IGFMP 2014-11-17 17:16:46 -06:00
Gregory Nutt
38754a3466 Completes basic changes to support per-device/per-link TCP receive window size 2014-11-16 11:15:21 -06:00
Gregory Nutt
2340d46d20 Rename NET_LL_MTU to NET_DEV_MTU; rename d_llmtu to d_mtu 2014-11-16 10:42:19 -06:00
Gregory Nutt
c00a37a3db Fixes for Ethernet, SLIP, and Ethernet+SLIP builds 2014-11-16 09:55:58 -06:00
Gregory Nutt
859748a94e Completes conversion of CONFIG_NET_BUFIZE to CONFIG_NET_ETH/SLIP_MTU 2014-11-16 09:22:38 -06:00
Gregory Nutt
ca7486d7f3 Add link MTU size to network device structure. 2014-11-16 08:49:14 -06:00
Gregory Nutt
51adb90e9a Network: Update SLIP configuration; Fix compile issues when building SLIP only 2014-11-15 14:36:49 -06:00
Gregory Nutt
2e55db369d Network: All logic will now handle varialbe length link layer protocol headers within incoming packets. This permits use of multiple network interfaces with differing data links. For example, ETHERNET + SLIP 2014-11-15 13:13:23 -06:00
Gregory Nutt
a831ab21bc Merge remote-tracking branch 'origin/master' into llhdrlen 2014-11-15 10:04:49 -06:00