To avoid losing the first frame, the set_buf needs to excute first. At the same time, imgdata->start_capture should excuted before the imgsensor->start_capture.
Signed-off-by: yaojingwei <yaojingwei@xiaomi.com>
The driver's main purpose is to support the porting of the open source
component optee_client (https://github.com/OP-TEE/optee_client) to nttux.
The basic function of the driver module is to convert the REE application layer data and send it to the TEE through rpmsg.
The main functions include
1 driver registration.
we need to register a device driver(/dev/tee0) through optee_register function.
2 open the driver
3 ioctl the driver
The ioctl command passes different parameters and commands, and interacts with the TEE through rpmsg.
4 close the driver
Signed-off-by: hujun5 <hujun5@xiaomi.com>
It may cause out_of_bounds when two side have different configuartion
on NAME_MAX and FS_LARGEFILE(affects size of blkcnt_t)
Signed-off-by: liaoao <liaoao@xiaomi.com>
it may cause use after free if server has removed block device before calling
its operations,such as:
server: rm /dev/testrpmsgblk
client: ls /dev/testrpmsgblk
Signed-off-by: liaoao <liaoao@xiaomi.com>
A segmentfault might happen when read/write/unlink ops called without an open
ops called because it bind ept's ops in rpmsgblk_open_handler.
proxy> rm /dev/ram1
segmentfault
proxy> ls /dev/ram1
segmentfault
Signed-off-by: liaoao <liaoao@xiaomi.com>
There are ICs available on the market that integrate various power inverter
features. The driver for such a device must be tightly coupled to a FOC device
as using it as a separate device doesn't make sense.
Openamp/libmetal's metal io operation used the atomic operation, but
in QEMU 8.1.2, the risc-v IO region is not allow to use atomic instruction
in SMP case.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Previous adjtime() implementation was limited to adjusting system
timer tick period. This commit reimplements the internals to use
a kernel watchdog timer. Platform-independent part of the code now
works also for adjusting hires RTC and tickless timer rate.
User code facing API is unchanged. Architecture code API has changed:
up_adj_timer_period() is replaced by up_adjtime().
Other improvements:
- Support query of remaining adjustment by passing NULL to first
argument of adjtime(). This matches Linux behavior.
- Improve resolution available for architecture driver, previously
limited to 1 microsecond per tick. Now 1 nanosecond per second.
In order to achieve better scalability, change the stride
from pixel mode to byte mode.For example, in the case of RGB888
mode with 466 pixels in width and a 4-byte aligned buffer,it is
only necessary to extend the buffer of one line from 1398 bytes
to 1400 bytes, instead of extending it to 1404 bytes.
Signed-off-by: rongyichang <rongyichang@xiaomi.com>
These values are board-specific properties that must be known on the application side.
Until now, these values had to be hardcoded on the application side.
When we record data and dump data, they are all executed within the system,
and there is no need to consider the issue of big or small endianness.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
1. Supporting `SIOCSIFADDR` and `SIOCDIFADDR` with Linux in6_ifreq struct to manage ipv6 addresses.
Ref: https://man7.org/linux/man-pages/man7/netdevice.7.html
2. Supporting alias like 'eth0:0' for multiple IPv6 addresses, to keep previous ioctl `SIOCGLIFADDR`, `SIOCSLIFADDR`, `SIOCGLIFNETMASK` and `SIOCSLIFNETMASK` working.
Ref: https://man7.org/linux/man-pages/man8/ifconfig.8.html
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Race condition if the remote proc is stoped during initialization phase
| #0 0x0249f959 in rpmsg_destroy_ept (ept=0xffffffc0) at open-amp/lib/rpmsg/rpmsg.c:376
| #1 0x024a938c in rpmsg_deinit_vdev (rvdev=0xf2303a48) at open-amp/lib/rpmsg/rpmsg_virtio.c:971
| #2 0x02117e33 in rptun_dev_stop (rproc=0xf2303a04, stop_ns=true) at rptun/rptun.c:891
| #3 0x021181d8 in rptun_do_ioctl (priv=0xf2303a00, cmd=11010, arg=0) at rptun/rptun.c:922
| #4 0x02119722 in rptun_ioctl_foreach (cpuname=0x0, cmd=11010, value=0) at rptun/rptun.c:1086
| #5 0x0211b9df in rptun_poweroff (cpuname=0x0) at rptun/rptun.c:1378
| #6 0x02053aa6 in board_power_off (status=0) at sim/sim_head.c:206
| #7 0x0253d65c in boardctl (cmd=65283, arg=0) at boardctl.c:400
| #8 0x021eb497 in cmd_poweroff (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_syscmds.c:356
| #9 0x021cdb4d in nsh_command (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_command.c:1164
| #10 0x021baa72 in nsh_execute (vtbl=0xef606280, argc=1, argv=0xef9b73e0, redirfile=0x0, oflags=0) at nsh_parse.c:845
| #11 0x021c6b0a in nsh_parse_command (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2744
| #12 0x021c7166 in nsh_parse (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2828
| #13 0x0221fa2f in nsh_session (pstate=0xef606280, login=1, argc=1, argv=0xef7a7860) at nsh_session.c:245
| #14 0x021f8c04 in nsh_consolemain (argc=1, argv=0xef7a7860) at nsh_consolemain.c:75
| #15 0x021b77eb in nsh_main (argc=1, argv=0xef7a7860) at nsh_main.c:74
| #16 0x02166ddf in nxtask_startup (entrypt=0x21b76ca <nsh_main>, argc=1, argv=0xef7a7860) at sched/task_startup.c:70
| #17 0x020b363c in nxtask_start () at task/task_start.c:134
Signed-off-by: chao an <anchao@xiaomi.com>
In `drivers/rptun/rptun.c`, we have a `rptun_is_recursive` function,
which lets rptun thread run recursively. Then the `usrsock_rpmsg_ept_cb`
may be called inside `usrsock_rpmsg_ept_cb`, which can cause some
unexpected behavior, so we add a queue to keep the order of incoming
messages to reduce the complexity.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When tun_txavail_work is running, switch to tun_close thread and priv->lock will be destroyed, then switch back to tun_txavail_work thread, an error will occur when nxmutex_unlock(&priv->lock)
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
There is a risk that interfaces such as psock_ioctl/psock_setsockopt
will cause paramete to be not four-byte aligned after calculating the
offset, so align the length of the structure with parameters by four
bytes.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
When tun_txavail_work is running, switch to tun_close thread and priv->lock will be destroyed, then switch back to tun_txavail_work thread, an error will occur when nxmutex_unlock(&priv->lock)
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
In previous versions, during the teardown phase, the "open_blockdriver" would call the "mtd proxy" causing the "file mtd" node to be registered in the ftl. " node is registered in ftl.
Therefore, we changed the behavior to find the corresponding inode by node name.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Add the Sim WiFi function, which can provide the wifi operating on nuttx sim emulator,
and support two modes that simulate wifi, HWSIM and RNC(real network card).
- In the HWSIM mode, we simulates two wlan interfaces. The wlan0 is STA and
the wlan1 is AP. The wlan0 can connect to the wlan1 in the nuttx simulator.
- In the RNC mode, we can use the same wlan interface name on the nuttx simulator
to control the connection behavior of the real wireless card.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
The BIT macro is widely used in NuttX,
and to achieve a unified strategy,
we have placed the implementation of the BIT macro
in bits.h to simplify code implementation.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
so the user could register fb device directly instead
go through the sequence of up_fbinitialize/up_fbgetvplane
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
forget from patch:
commit bbf5b0bb6d
Author: jianglianfang <jianglianfang@xiaomi.com>
Date: Tue Aug 15 19:47:14 2023 +0800
driver/video: adapting Goldfish FB to VSync optimized FB driver
The circbuf part is implemented by the fb driver, and goldfish needs to
delete the part related to circbuf and adapt to the interface of the fb
driver.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
==2787216==ERROR: AddressSanitizer: heap-use-after-free on address 0xf4702448 at pc 0x0136c544 bp 0x9f54d358 sp 0x9f54d348
READ of size 4 at 0xf4702448 thread T0
0 0x136c543 in rpmsg_destroy_ept open-amp/lib/rpmsg/rpmsg.c:357
1 0x1252b29 in sensor_rpmsg_ns_unbind_cb sensors/sensor_rpmsg.c:1216
2 0x1371de5 in rpmsg_virtio_ns_callback open-amp/lib/rpmsg/rpmsg_virtio.c:663
3 0x1371026 in rpmsg_virtio_rx_callback open-amp/lib/rpmsg/rpmsg_virtio.c:583
4 0x137c105 in virtqueue_notification open-amp/lib/virtio/virtqueue.c:711
5 0x1368604 in rproc_virtio_notified open-amp/lib/remoteproc/remoteproc_virtio.c:433
6 0x1363abe in remoteproc_get_notification open-amp/lib/remoteproc/remoteproc.c:10
Signed-off-by: yintao <yintao@xiaomi.com>
convert from body coordinate system to right-hand
coordinate system.
Example:
Compared to the standard coordinate system,
the x-axis and y-axis are interchanged and have opposite directions,
the z-axis remains normal.
body coordinate ----> right-hand coordinate
+x +y
| |
| |
| |
| |
-y<-------. .------>+x
/ /
/ /
/ /
/ /
+z +z
So for the above conversion, using "P3" to represent transformation relationships
The front is 1 0 2, which represents the y x z axis.
The standard order is 0 1 2, so y and x are interchanged.
The following -1 1 1 indicates the direction of the axis.
The standard is 1 1 1. Because the current y-axis is opposite to
the standard x-axis, it is -1.
static const struct sensor_axis_map_s g_remap_tbl[] =
{
{ 0, 1, 2, 1, 1, 1 }, /* P0 */
{ 1, 0, 2, 1, -1, 1 }, /* P1 */
{ 0, 1, 2, -1, -1, 1 }, /* P2 */
{ 1, 0, 2, -1, 1, 1 }, /* P3 */
{ 0, 1, 2, -1, 1, -1 }, /* P4 */
{ 1, 0, 2, -1, -1, -1 }, /* P5 */
{ 0, 1, 2, 1, -1, -1 }, /* P6 */
{ 1, 0, 2, 1, 1, -1 }, /* P7 */
};
you can call the function sensor_remap_vector_raw16 and pass P3 parameters
to perform the conversion.
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
When the application calls poll and returns the POLLIN event,
QPOLL will be called again during the read operation,
causing rx_length to change and data to be lost.
Therefore, read only need to actively call qpoll to collect driver
data when rx length is 0.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
I added a function that I didn't use when I upstream another patch. Delete it
https://github.com/apache/nuttx/pull/10709
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
1.check the rpmsg name when clk_register.
2.clk_get rpmsg clk print error:
clk/clk.c:1231:3: runtime error: null pointer passed as argument 2, which is declared to never be null
3.fix some function miss keyword FAR.
4.clk_disable_unused may disable rpmsg clk which disable the clk that maybe used by others
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
1.client get the regualtor which is enabled by server, will disable the regualtor.
2.regulator_rpmsg_server_unbind will disable regualtor which maybe used by other client.
3.regulator_rpmsg_server_unbind will be deadloop when the regulator is always_on;
4.regulator_rpmsg_client_destroy does not match server cpu name,may destory by stop other rptun dev
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
