Marco Krahl has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt, S.A has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Philippe Coval has submitted the ICLA and we can migrate the licenses
to Apache.
Alan Carvalho de Assis has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt, S.A has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
The GPIO_LEDx are already used by esp32_userleds.c, they shouldn't
be used by esp32_gpio.c. This patch also includes the GPIO Input
example (GPIN) that was missing.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Mateusz Szafoni has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Actia Nordic AB has submitted the SGA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Several licenses were missed in the initial work
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Added a simple defconfig to support the userled driver and its application
for testing in the nsh.
Signed-off-by: Gustavo L F Walbon <gwalbon@linux.ibm.com>
Since 7a046358d9 the top-level COPYING
file has been deleted and replaced by DISCLAIMER, LICENSE, and NOTICE
files. However, some references to the old COPYING file remained in
Kconfig help text and documentation.
Documentation/contributing/coding_style.rst:
Documentation/introduction/about.rst:
boards/arm/lpc17xx_40xx/olimex-lpc1766stk/README.txt:
boards/arm/sam34/arduino-due/README.txt:
boards/arm/sam34/sam4l-xplained/README.txt:
boards/arm/sama5/giant-board/README.md:
boards/arm/sama5/sama5d2-xult/README.txt:
boards/arm/sama5/sama5d4-ek/README.txt:
boards/arm/samd2l2/samd20-xplained/README.txt:
boards/arm/samd2l2/samd21-xplained/README.txt:
boards/arm/samd2l2/saml21-xplained/README.txt:
boards/arm/stm32/hymini-stm32v/README.txt:
boards/arm/stm32/stm3210e-eval/README.txt:
fs/fat/Kconfig:
libs/libc/string/Kconfig:
* Updates stale references to the old top-level COPYING file to
either LICENSE or NOTICE (or both), as appropriate in each
instance.
Laurent Latil has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gwenhael Goavec has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidranec has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Jacob Dahl has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Bob Feretich has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Goden Freemans has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Ivan Petrov Ucherdzhiev has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Petro Karashchenko has submitted the ICLA and we can migrate the licenses
to Apache.
Ivan Petrov Ucherdzhiev has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Neil Hancock has submitted the ICLA and we can migrate the licenses
to Apache.
Mateusz Szafoni has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Max Holtzberg has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Michael Jung has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Mateusz Tomasz Szafoni has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Abdelatif Guettouche has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
lpc17_40_userleds.c: Adds the support of Userleds driver which
provides a device to manipulate the 4 leds of the board through the
/dev/userleds.
lpc17_40_leds.c: Removes not used definitions, eg. MBED_LED3_ON.
Board LED Status support(CONFIG_ARCH_LED=y) and Device Drivers/Led
Support(CONFIG_ARCH_USERLED=y) can not be enable together.
Signed-off-by: Gustavo L F Walbon <gwalbon@linux.ibm.com>
Normally, statically allocated data goes in .bss, followed by the
initial stack, followed by HEAP. However, any data that is statically
allocated in SRAM4 with __attribute__ ((section (".sram4"))) will
clobber, and be clobbered by, the HEAP.
On STM32H7, BDMA can only access SRAM4. Therefore any BDMA buffers (or
any other data) placed in SRAM4 will expose this problem. In one case,
this manifested as a failure of NSH to start, because the SPI6 BDMA
buffers clobbered the /dev/console inode structs, which the OS
allocated earlier.
This PR ensures that only the rest of SRAM4, after any static data, is
added to the heap. This PR also allows SRAM4 to be completely excluded
from the heap by a new Kconfig, CONFIG_STM32H7_SRAM4EXCLUDE, similar
to what CONFIG_STM32H7_DTCMEXCLUDE does for the DTCM region.
Change required in linker scripts:
Every STM32H7 linker script must replace this:
.sram4 :
{
} > sram4
with this:
.sram4_reserve (NOLOAD) :
{
*(.sram4)
. = ALIGN(4);
_sram4_heap_start = ABSOLUTE(.);
} > sram4
or link will fail with: undefined reference to '_sram4_heap_start'.
The Release Notes should document this for users with out-of-tree
boards.
arch/arm/src/stm32h7/Kconfig:
* Add config STM32H7_SRAM4EXCLUDE to allow excluding all of SRAM4
from the HEAP.
arch/arm/src/stm32h7/stm32_allocateheap.c:
* Only when including SRAM4 in the heap, define HAVE_SRAM4,
SRAM4_START, SRAM4_END, and SRAM4_HEAP_START.
* Add "Private Data" section.
* Add extern for_sram4_heap_start, which must be defined in the
board's linker script.
* arm_addregion(): Only add SRAM4 to the heap when configured to
do so, i.e., unless CONFIG_STM32H7_SRAM4EXCLUDE is defined, and
only add the portion of SRAM4 that is past any static data.
boards/arm/stm32h7/nucleo-h743zi/scripts/flash.ld:
boards/arm/stm32h7/nucleo-h743zi/scripts/kernel.space.ld:
boards/arm/stm32h7/nucleo-h743zi2/scripts/flash.ld:
boards/arm/stm32h7/stm32h747i-disco/scripts/flash.ld:
boards/arm/stm32h7/stm32h747i-disco/scripts/kernel.space.ld:
* Update all in-tree STM32H7 board linker scripts as described in
"Change required in linker scripts" above.
Testing:
* Successfully built all of the following configurations:
nucleo-h743zi2:jumbo
nucleo-h743zi2:nsh
nucleo-h743zi:nxlines_oled
nucleo-h743zi:elf
nucleo-h743zi:otg_fs_host
nucleo-h743zi:nsh
nucleo-h743zi:netnsh
nucleo-h743zi:pwm
stm32h747i-disco:nsh
* Tested with custom board.
* nxstyle.
References:
[1] See the dev@nuttx.a.o mailing list discussion started 2021/03/25:
"How to ensure HEAP will not overlap static DMA buffer?"
https://lists.apache.org/thread.html/recf2bb9043f8c9f53c10917e2adb2ec64fe35dc5e6f9a695a7ac6ecc%40%3Cdev.nuttx.apache.org%3E
[2] See arm_addregion() in arch/arm/src/stm32h7/stm32_allocateheap.c
Thanks to Gregory Nutt and David Sidrane for suggestions and reviews.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Several files were missed in the past
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
tcpip ok
update wifi demo configuration
fix tcpip input cause misalign fault
change some api definetions in nuttx
fix wifi manager strlen copy without suffix null character
fix 602 network buf allocation issue
wifi scan works
[ble] Add controller code
[BLE] Add nuttx adapt code for blecontroller .
[BLE] modified include file path, to fix cflag is too long.
[ble]Test ble peripheral pass, save code.
[ble] Organize the code
[BLE] Add blecontroller config for nuttx
[BLE] Add config for ble example
fix tcp lost packet when rx
support wpa3.
Copy default config from wifi default config. Create ble for local test and ble tester for autopts.
Add config for local test.
Add pts teset config for host test
Add config for mesh test
Create task to init blecontroller
Delete blecontroller rx thread.
using idle task to receive hci command from host
Set ble device name to /dev/ble, and fix code.
1.fix a ke schedule risk 2. CFG_HOST is enabled only in the case that CONFIG_BLE_HOST_DISABLE is not enabled, by lanlan
rm _sp_main stack.
change h/l workq_stack_size 6K
change l workq_stack_size 3K.
[ble] delete file_detach
color idle stack.
clear bl602 netdev code
SCAN is sorted according to RSSI
enlarge nsh command line buffer
fixup stack overflow check checkfail when startup
arch/risc-v/BL602:fix reboot cause crash
reboot default use romapi.
riscv/bl602:netdev support defered input, remove wifi_tx function
risc-v/bl602:fix sem_timedwait usage error in bl_cmds
risc-v/bl602:fix memory access out of bounds when copy ssid
remove ble and wifi source, download when build
add bl602 blob gitignore
risc-v/bl602:remove ble-pts defconfig
Fix some typos in NuttX style naming
Fix the replacement of tab to space
fix wlan interface down still receive packet
fix wapi crash, rx when ifdown,and ble_hci_rx_do
change system reset to rom dirver
change ble hci interval to 50ms
NuttX support wifi enable/disable log via KConfig
support country code configuration in Kconfig
fix ap tx not work
This fixes the following error with CONFIG_SIM_SANITIZE=y on macOS.
```
CP: /Users/yamamoto/git/nuttx/nuttx/include/nuttx/config.h
CC: nettest_host.c
CC: nettest_server.c
LD: tcpserver
Undefined symbols for architecture x86_64:
"___asan_handle_no_return", referenced from:
_nettest_server in nettest_server.hobj
"___asan_init", referenced from:
_asan.module_ctor in nettest_host.hobj
_asan.module_ctor in nettest_server.hobj
"___asan_option_detect_stack_use_after_return", referenced from:
_nettest_server in nettest_server.hobj
"___asan_register_image_globals", referenced from:
_asan.module_ctor in nettest_server.hobj
"___asan_report_load1", referenced from:
_nettest_server in nettest_server.hobj
"___asan_report_load4", referenced from:
_nettest_server in nettest_server.hobj
"___asan_report_store1", referenced from:
_nettest_server in nettest_server.hobj
"___asan_report_store2", referenced from:
_nettest_server in nettest_server.hobj
"___asan_report_store4", referenced from:
_nettest_server in nettest_server.hobj
"___asan_stack_malloc_1", referenced from:
_nettest_server in nettest_server.hobj
"___asan_unregister_image_globals", referenced from:
_asan.module_dtor in nettest_server.hobj
"___asan_version_mismatch_check_apple_clang_1100", referenced from:
_asan.module_ctor in nettest_host.hobj
_asan.module_ctor in nettest_server.hobj
"___ubsan_handle_add_overflow", referenced from:
_nettest_server in nettest_server.hobj
"___ubsan_handle_builtin_unreachable", referenced from:
_nettest_server in nettest_server.hobj
"___ubsan_handle_pointer_overflow", referenced from:
_nettest_server in nettest_server.hobj
"___ubsan_handle_shift_out_of_bounds", referenced from:
_nettest_server in nettest_server.hobj
"___ubsan_handle_sub_overflow", referenced from:
_nettest_server in nettest_server.hobj
"___ubsan_handle_type_mismatch_v1", referenced from:
_nettest_server in nettest_server.hobj
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
```
Summary:
- This commit removes SCHED_INSTRUMENTATION which has been used
to debug NuttX SMP kernel
Impact:
- None
Testing:
- Tested with ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
David Sidrane has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
since other subsystem doesn't need call these function anymore
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Idfb217c412db62d9f17f427310b75bb78785dc50
Sebastien Lorquet has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Alan Carvalho de Assis has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
-CONFIG_USEC_PER_TICK=10000
+CONFIG_USEC_PER_TICK=1000
A system timer with a 10 MS period is not sufficient to run the dual thread sporadic scheduler test since the timings in that test are also around 10 MS. Apparently there is a race condition when both sporadic thread's budgets complete on the same clock time. This change does not eliminate the race, but reduces its effect greatly.
Alan Carvalho de Assis has submitted the SGA and we can migrate the
licenses to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This PR is the companion to #apache/incubator_nuttx_apps/620 . See that PR for further information.
No impact is anticipated
Tested using the (new) stm32f4discovery:sporadic configuration.
Ported from stm32f7/h7: If configured this way, ramp-up the LSE crystal
oscillator driving strength until the LSE starts up.
Signed-off-by: Michael Jung <mijung@gmx.net>
Support for the STMicroelectronics STM32L562E-DK development board. This
is a proof-of-concept port that demonstrates running NuttX as the
Non-Secure TrustZone domain companion to TrustedFirmware-M.
Signed-off-by: Michael Jung <mijung@gmx.net>
Alan Carvalho de Assis has submitted the SGA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Summary:
- This commit adds CONFIG_ARCH_LEDS_CPU_ACTIVITY=y to rndis_smp and wifi_smp
Impact:
- spresense:rndis_smp and spresense:wifi_smp configurations
Testing:
- Tested with smp and ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds CPU activity LEDs feature to spresense
Impact:
- CONFIG_ARCH_LEDS_CPU_ACTIVITY=y only
Testing:
- Arch specific code and defconfigs will be commited later
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Let me revert the commit because I noticed that performance
with iperf -s is much worth than before.
Impact:
- sabre-6quad:netnsh oly
Testing:
- Tested with iperf (both -c and -s) with QEMU
This reverts commit 07e7ccb80c.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Adjust CONFIG_BOARD_LOOPSPERMSEC in all defconfigs
- Add CONFIG_TESTING_GETPRIM to nsh and nshsram
- Add CONFIG_SYSTEM_TASKSET to smp
- NOTE: CONFIG_SCHED_WAITPID is removed because it is selected
Impact:
- The smp app will take longer than before but it's a correct behavior
Testing:
- Tested with getprime, ostest, smp
As ESP32 has 2 I2C interfaces and BMP180 is a I2C sensor, the criterias to use BMP180 in I2C0 or I2C1 are:
1- First, bring-up routines search for BMP180 in I2C0.
If BMP180 is found in I2C0, then /dev/press0 is created.
2- If BMP180 cannot be registered in I2C0, bring-up routines search for it in I2C1.
If BMP180 is found in I2C1, then /dev/press0 is created.
It means only one BMP180 could be suported in Nuttx. In my tests I've observed
that BMP180 example application doesn't seem to work with /dev/press1 BMP180 device,
therefore even BMP180 is found in I2C1, it'll be registered as /dev/press0 device.
It was missing and it wasn't possible to enable I2C (0 and/or 1)
before this fix.
To sum up, this fix implements a I2C register function in ESP32
bring-up routines (esp32_bringup.c) and call if for I2C0 and/or
I2C1 during ESP32 bringup (these function callings are conditioned
by CONFIG_ESP32_I2C (to check if I2C support has been configured),
CONFIG_ESP32_I2C0 (to check if I2C0 support has been configured)
and CONFIG_ESP32_I2C1 (to check if I2C1 support has been configured).
Once this fix is implemented, /dev/i2c0 and/or /dev/i2c1 interfaces
become available and work fine.
The GPIO example was also extended to include testing an interrupt pin.
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Co-authored-by: Alan Carvalho <alan.carvalho@espressif.com>
This commits adds support for the ESP32-C3 IO Mux and GPIO Matrix. It
also includes necessary board logic to run the GPIO example with 2
outputs.
Co-authored-by: Alan Carvalho <alan.carvalho@espressif.com>
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
I2C3 not worked due to it's GPIO pin definition has been missing on board.h.
Fix it through include two pin macros on stm32l4x3xx_pinmap.h to board.h.
GPIO_I2C3_SCL and GPIO_I2C3_SDA is pointing A7 and B4 respectively.
Summary:
- This commit changes spinlock APIs (spin_lock_irqsave/spin_unlock_irqrestore)
- In the previous implementation, the global spinlock (i.e. g_irq_spin) was used.
- This commit allows to use caller specific spinlock but also supports to use
g_irq_spin for backword compatibility (In this case, NULL must be specified)
Impact:
- None
Testing:
- Tested with the following configurations
- spresnse:wifi, spresense:wifi_smp
- esp32-devkitc:smp (QEMU), sabre6-quad:smp (QEMU)
- maxi-bit:smp (QEMU), sim:smp
- stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
NUTTXNAME is used only as an alias for "nuttx", not actually a
configuration property. Its definition might erroneously imply that the
name of binary image may be configurable, which is not the case.
Summary:
- This commit adds iperf to rndis and rndis_smp defcofigs
Impact:
- rndis and rndis_smp
Testing:
- Tested with iperf
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
The BaseBoard carries Teensy 4.1 SBC. The complete design
of the baseboard (teensy_bb-1.tdb) is available at
https://gitlab.com/pikron/projects/imxrt-devel/-/tree/master/hw
Attempt is to provide configuration which enables most
of interfaces of the BaseBoard and allows runtime applications
loading over TFTP.
Signed-off-by: Pavel Pisa <ppisa@pikron.com>
The ARMv7 specifies minimal alignment to be 8 for EABI. Ensure
that sections are placed with even greater minimal alignment.
Sections final alignment should be adjusted according
to alignment of their inputs, but for some reasons some
combinations lead to .ARM.exidx overlap with .data.
When alignment is increased then the direct fetch of the
fill location
_eronly = ABSOLUTE(.);
does not match with final LMA placement of the .data section.
Use constructs which should result in matching .data LMA
address for all cases
_eronly = ABSOLUTE(.);
Signed-off-by: Pavel Pisa <ppisa@pikron.com>
The BSP MAke.defs line
LDFLAGS += -Map=$(TOPDIR)/nuttx.map
results in absolute path in nuttx-export/scripts/Make.defs
which would mean that each application rebuild would attempt
to modify file inside original build of NuttX system.
Even worse, it prevents linking by GCC, because -Map=xxx/nuttx.map
works directly in LD, it would require -Wl,-Map= for GCC.
Fixed name of map file prevents to define map file by build
system using exported NuttX libraries and link kit.
Change is done to allow OMK template based applications
development for another NuttX BSP
https://github.com/ppisa/nuttx-devel/tree/master/nuttx-omk-template
Signed-off-by: Pavel Pisa <ppisa@pikron.com>
Summary:
- This commit makes the iperf work with CONFIG_NET_TCP_WRITE_BUFFERS
- Since the iperf sends a large packet (e.g. 16KB), CONFIG_IOB_NBUFFERS
must be increased enough to hold the packet
- To improve performance CONFIG_IMX_ENET_NTXBUFFERS was changed to
the default (i.e. 2)
Impact:
- sabre-6quad:netnsh only
Testing:
- Tested with iperf with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit updates the followings
- Remove CONFIG_DEBUG_XXX except for CONFIG_DEBUG_FULLOPT and CONFIG_DEBUG_SYMBOLS
- Add CONFIG_EXAMPLES_IPERF=y and CONFIG_EXAMPLES_TCPBLASTER=y
- Set CONFIG_IMX_ENET_NTXBUFFERS=1 and CONFIG_NET_ETH_PKTSIZE=1514
- Add CONFIG_SCHED_LPWORK=y and CONFIG_SYSLOG_TIMESTAMP=y
- Add CONFIG_SYSTEM_DHCPC_RENEW=y and CONFIG_SYSTEM_DHCPC_RENEW=y
Impact:
- sabre-6quad:netnsh only
Testing:
- Tested with sabre-6quad:netnsh with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
add support to attach the devices via HCI TTY to Bluetooth Host
Reference:
drivers/wireless/bluetooth/bt_uart_shim.c
Signed-off-by: chao.an <anchao@xiaomi.com>
Summary:
- This commit adds the following configs
+CONFIG_EXAMPLES_IPERF=y
+CONFIG_EXAMPLES_IPERFTEST_DEVNAME="eth0"
+CONFIG_NET_ETH_PKTSIZE=1514
Impact:
- lm3s6965-ek:discover only
Testing:
- Tested with qemu
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
interrupts.
This example uses the GPIO driver with the 3 on board LEDs outputs and one input
as an interrupt pin.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
The compiler default varies among the environment.
Especially, the default std version for xcode clang doesn't work
for libcxx.
This commit just ensures to use the consistent std version
among compilers. we can come up with a more sophisticated way
to control the version later if desiable.
clang/macOS (from xcode):
spacetanuki% c++ -dM -E -x c++ /dev/null | grep __cplusplus
#define __cplusplus 199711L
spacetanuki% c++ --version
Apple clang version 11.0.0 (clang-1100.0.33.17)
Target: x86_64-apple-darwin18.7.0
Thread model: posix
InstalledDir: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin
spacetanuki%
clang/macOS (from homebrew):
spacetanuki% /usr/local/Cellar/llvm/11.0.0/bin/clang++ -dM -E -x c++ /dev/null | grep __cplusplus
#define __cplusplus 201402L
spacetanuki% /usr/local/Cellar/llvm/11.0.0/bin/clang++ --version
clang version 11.0.0
Target: x86_64-apple-darwin18.7.0
Thread model: posix
InstalledDir: /usr/local/Cellar/llvm/11.0.0/bin
spacetanuki%
gcc/ubuntu:
root@477d94753e9b:/# c++ -dM -E -x c++ /dev/null | grep __cplusplus
#define __cplusplus 201402L
root@477d94753e9b:/# c++ --version
c++ (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0
Copyright (C) 2019 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
root@477d94753e9b:/#
* For C, wchar_t is provided by the OS. On NuttX, it's uint16_t.
(Except wide character literals, which uses the compiler
built-in knowledge of wchar_t.)
* For C++, wchar_t is a built-in type. It's provided by the compiler.
* The compilers built-in wchar depends on the compiler configuration.
For the sim, the compilers are usually configured with wchar_t == int,
which is 32-bit.
* wchar_t should be compatible between C and C++.
This commit fixes the mismatches by telling the compiler to use
16-bit wchar_t.
An alternative is to make NuttX use 32-bit wchar_t if the compiler
is configured with 32-bit wchar_t. It can increase the runtime
footprint. While it might be ok for the sim, it might be a problem
for real devices.
An empty extension for sed -i is not widely available.
* Where it isn't available (eg. macOS's sed) "sed -i -e" will
create a backup file with the "-e" suffix.
* Even GNU sed documentation says it's "not recommended".
This commit deals with it by:
* Replace it with a more appropriate tool (kconfig-tweak)
* Or, specify the extension (.bak)
Summary:
- This commit updates how to build the u-boot
- Also adds tftpboot
Impact:
- No impact
Testing:
- Tested with sabre-6quad board
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Modify the default configuration in KConfig.
Sync latest commit from mainline.
Remove unused demo configuration
fixup bl602 nsh defconfig cause CICD failed
Rebase from mainline code
Summary:
- This commit replaces SHES related headers under stm32f4discovery
Impact:
- No impact
Testing:
- Build check only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit replaces SHES related headers under cxd56xx
Impact:
- No impact
Testing:
- Build check only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This reverts commit e70bff723b.
* These warnings sometimes find real bugs. There are ways to disable
the specific warnings for the specific code (eg. libcxx) selectively.
* It doesn't make much sense to disable these warnings only on sim.
There are many boards with -Wall -Wshadow. Because the sim is
mainly for development and testing, it should be less forgiving
than real boards.
Summary:
- This commit adds imx_enet driver derived from imxrt_enet
Impact:
- imx6 only
Testing:
- Tested with sabre-6quad:netnsh
- NOTE: telnetd works with QEMU
these macro doesn't need anymore with commit:
commit d32e9c38df
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Sat Jul 11 18:37:40 2020 +0800
boards: Move the C/C++ search path to the common place
so all boards support uClibc++/libc++ automatically
Summary:
- This commit adds adb configuration
Impact:
- stm32f4discovery:adb only
Testing:
- Tested with adb client on ubuntu18.04 x86_64
- adb shell works but still unstable
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary
- This commit fixes interrupt handling for SMP
- The following are the changes
- Introduce up_copyfullstate.c
- Add enter_critical_section() to up_exit()
- Add a critical section to up_schedule_sigaction()
- Introduce pseudo timer thread to send periodic events
- UART and interval timer are now handled in the pause handler
- Apply the same SMP related code as other CPU architectures
- However, signal handling and context switching are not changed
- Also enable debug features and some tools in smp/defconfig
Imact
- SMP only
Testing
- Tested with sim:smp on ubuntu18.04 x86_64
- Tested with hello, taskset, smp, ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
The following nxstyle errrors are intentionally left.
They are a part of a large table, which is not trivial to fix.
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:43:87: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:44:86: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:45:87: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:46:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:47:89: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:48:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:49:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:50:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:51:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:52:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:53:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:54:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:55:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:56:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:57:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:58:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:59:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:60:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:61:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:62:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:63:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:64:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:65:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:66:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:67:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:68:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:69:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:70:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:71:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:72:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:73:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:74:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:75:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:76:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:77:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:78:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:79:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:80:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:81:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:82:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:83:84: error: Long line found
boards/arm/sam34/sam3u-ek/src/sam_lcd.c:84:84: error: Long line found
The following nxstyle error was intentionally left.
(a URL in a comment)
boards/arm/stm32l4/nucleo-l452re/src/stm32_adc.c:79:93: error: Long line found
The following nxstyle errors are intentionally left.
* A table, not trivial to fix:
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:142:119: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:143:95: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:144:88: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:145:119: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:146:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:147:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:148:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:149:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:150:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:151:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:152:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:153:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:154:119: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:155:119: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:156:119: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:157:119: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:158:119: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:159:119: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:160:119: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:161:119: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:162:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:163:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:164:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:165:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:166:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:167:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:168:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:169:108: error: Long line found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:170:119: error: Long line found
* Identifiers like ASCII_a:
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:397:35: error: Mixed case identifier found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:651:16: error: Mixed case identifier found
boards/arm/stm32/stm32ldiscovery/src/stm32_lcd.c:660:38: error: Mixed case identifier found
Summary:
- Remove comments on up_idle() which is old information
- Add L2CC info with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
