Gregory Nutt
60f0186258
6loWPAN: Add calculation of TCP header size. It is not a constant.
2017-04-07 17:04:57 -06:00
Gregory Nutt
e3b4d77ee2
Merge branch 'rwlock'
2017-04-07 15:49:16 -06:00
Gregory Nutt
7aff0f77d9
Merge remote-tracking branch 'origin/master' into rwlock
2017-04-07 15:49:03 -06:00
Mark Schulte
2b1ca79b4b
pthread rwlock bugfixes
2017-04-07 15:45:24 -06:00
Gregory Nutt
f264e6aec2
6loWPAN: Fixes for fragmented packets. Change fixes some things, breaks other. Lots more to do.
2017-04-07 15:27:53 -06:00
Gregory Nutt
47647eac8f
6loWPAN: Correct some fragmentation handling
2017-04-07 09:49:10 -06:00
Gregory Nutt
3ea3fbcef1
Merge branch 'master' of bitbucket.org:nuttx/nuttx
2017-04-07 08:13:58 -06:00
Gregory Nutt
19f19e31eb
6loWPAN: Correct some list handling logic.
2017-04-07 08:13:18 -06:00
Gregory Nutt
b631dc886f
Remove CONFIG_PTHREAD_RWLOCK. Rwlock interfaces built unconditionally.
2017-04-07 07:34:22 -06:00
Mark Schulte
7bb26d2615
pthreads: Adding rwlock implementation
...
Adding an implementation for read/write locks into the pthread library.
These locks are writer priority, such that if any writers come in they
are given priority for writing.
2017-04-07 07:03:00 -06:00
Bob Ryan
57dbf7a23a
Merged in BobRyan530/nuttx/fix_stm32f103-minimum_usbnsh (pull request #313 )
...
Disable serial console on stm32f103-minimum usbnsh example project config. Devices enumerate after this change.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-04-07 01:33:29 +00:00
Bob Ryan
3465f6be53
Disable serial console on stm32f103-minimum usbnsh example project config. Devices enumerate after this change.
2017-04-06 17:41:07 -07:00
Gregory Nutt
58d0c1f228
6loWPAN: Back out part of the last commit. That included two fixes for a problem. One that didn't work and is unnecessary and one that is necessary. The commit removes the former.
2017-04-06 18:11:04 -06:00
Gregory Nutt
494d996826
6loWPAN: Fix a few UDP-related issues.
2017-04-06 17:57:15 -06:00
Masayuki Ishikawa
b4e01ecbf9
Merged in masayuki2009/nuttx.nuttx/fix_efm32_i2c_timeout (pull request #312 )
...
EFM32 I2C: Fix timeout calculation
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-04-06 22:59:34 +00:00
Gregory Nutt
27c65c3f22
6loWPAN: Add network IOCTL support to set the node address
2017-04-06 15:58:00 -06:00
Gregory Nutt
50170a6108
6loWPAN: Fixes for UDP packet transfers.
2017-04-06 11:57:43 -06:00
Jussi Kivilinna
e3b3e57e56
RTC: add interface for check if RTC time has been set
...
New interface allows checking if RTC time has been set. This allows to application to detect if RTC has valid time (after
reset) or should application attempt to get real time by other means (for example, by launching ntpclient or GPS).
2017-04-06 09:53:11 -06:00
Gregory Nutt
ac8ddf4eb1
SAMv7: In review of last patch, change literal 0xfff to WDT_MR_WDD_MAX for portability.
2017-04-06 09:46:04 -06:00
Frank Benkert
571f3d952e
SAMV7: Watchdog: fix Forbidden Window Value
...
According the Datasheet the WDD Value is the lower bound of a so called Forbidden Window and to disable this we have to set the WDD
Value greater than or equal to the WDV Value. This seems to be a bug in the datasheet. It looks like we have to set it to a greater value than the WDV to realy disable this Thing. When triggering the Watchdog faster than the (very slow) clock source of the Watchdog fires, this Forbidden Window Feature resets the System if WDD equals to WDV.
This Changeset disables the Forbidden Window by setting the WDD Value to the Maximum (0xfff) Value possible.
2017-04-06 09:43:07 -06:00
Gregory Nutt
869e3b5b73
sim/sixlowpan: Now support apps/examples/udpblaster too.
2017-04-06 09:36:57 -06:00
Jussi Kivilinna
0aa52d98a2
STM32F7: add warning for RXDMA + IFLOWCONTROL combination
...
Combination of RXDMA + IFLOWCONTROL does not work as one might expect.
Since RXDMA uses circular DMA-buffer, DMA will always keep reading new
data from USART peripheral even if DMA buffer underruns. Thus this
combination only does following: RTS is asserted on USART setup and
deasserted on shutdown and does not perform actual RTS flow-control.
Data loss can be demonstrated by doing long up_mdelay inside irq
critical section and feeding data to RXDMA+IFLOWCONTROL UART.
2017-04-06 08:47:45 -06:00
Jussi Kivilinna
e2702cbe4e
STM32F7: fix UART7 and UART8 IFLOWCONTROL options
2017-04-06 08:46:24 -06:00
Jussi Kivilinna
dabf45f100
STM32F7: default CONFIG_STM32F7_DMACAPABLE to 'n'. STM32F7 does not have CCM RAM but DTCM, so this option does not need to enabled. DTCM RAM is DMA-able through CPU AHBS bus.
2017-04-06 08:44:53 -06:00
Jussi Kivilinna
e180522854
stm32f7: serial: add interface to get uart_dev_t by USART number, stm32_serial_get_uart
2017-04-06 08:41:41 -06:00
Alan Carvalho de Assis
95941b4908
STM32: Fix SYSCFG_CFGR1_I2C_PBXFMP_SHIFT value
2017-04-06 08:35:33 -06:00
Gregory Nutt
1fa300f011
6loWPAN: Fix uncompressing of IPv6 encoded packet.
2017-04-06 08:32:18 -06:00
Masayuki Ishikawa
f5b6ae627d
EFM32 I2C: Fix timeout calculation
2017-04-06 17:12:13 +09:00
Masayuki Ishikawa
34b9be8d01
Merged nuttx/nuttx/master into master
2017-04-06 17:03:36 +09:00
David Sidrane
0de787b558
Document set [{+|-}{e|x|xe|ex}] [<name> <value>]
2017-04-05 18:28:54 -06:00
Gregory Nutt
18518eae06
6loWPAN: Fix another HC06 indexing problem.
2017-04-05 18:14:13 -06:00
Gregory Nutt
d0aa22fb80
6loWPAN: Costmetic changes.
2017-04-05 17:26:12 -06:00
Gregory Nutt
72bffeddcc
6loWPAN: Fixes another HC06 indexing problem.
2017-04-05 14:31:44 -06:00
Gregory Nutt
b7c55660cb
6loWPAN: Correct more address manipulations.
2017-04-05 13:04:22 -06:00
Gregory Nutt
cb70ce7d3c
6loWPAN: Correct some IPv6 addresses and operations on IPv6 addresses.
2017-04-05 12:11:09 -06:00
Gregory Nutt
e61fd2d45b
6loWPAN input: Fix a counting error. Input packet sizes were being calculated a little too big.
2017-04-05 09:14:28 -06:00
Gregory Nutt
3b21545480
sixlowpan: Minor reorganization to removed some unused global varialbes and structure fields.
2017-04-05 08:40:30 -06:00
Juha Niskanen
3e6b92d5fa
tm32: stm32l15xxx_rcc: configure medium performance voltage range and zero wait-state when allowed by SYSCLK setting
...
Zero wait-state for flash can be configured when:
Range 1 and SYSCLK <= 16 Mhz
Range 2 and SYSCLK <= 8 Mhz
Range 3 and SYSCLK <= 4.2 Mhz
Medium performance voltage range (1.5V) can be configured when SYSCLK is up to 16 Mhz and PLLVCO up to 48 Mhz.
2017-04-05 07:41:25 -06:00
Juha Niskanen
bff341fdfc
stm32: stm32l15xx_rcc: add support for using MSI as system clock
2017-04-05 07:41:24 -06:00
Hidetaka
c543185123
Merged in TJ-Hidetaka-Takano/nuttx (pull request #310 )
...
Fixed gconfig target.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-04-05 12:18:04 +00:00
Hidetaka Takano
64a43627a2
Fixed gconfig target.
2017-04-05 19:53:54 +09:00
Hidetaka
b021b0194c
nuttx/nuttx を master にマージしました。
2017-04-05 19:37:19 +09:00
Gregory Nutt
38eed0a847
6loWPAN: Various fixes for building with different configurations; Some minimal testing of HC06
2017-04-04 17:06:17 -06:00
Gregory Nutt
ca2c18c023
6loWPAN: Fix return value and other issues in sixlowpan_frame_process
2017-04-04 16:12:16 -06:00
Gregory Nutt
34da085b40
6loWPAN: Yet another fix related to buffer offsets primarily.
2017-04-04 14:27:21 -06:00
Gregory Nutt
fdf706a3a9
6loWPAN: Additional fixes related to buffer offsets primarily.
2017-04-04 13:52:02 -06:00
Gregory Nutt
1f394a61b3
6loWPAN: Add option to dump buffers. Fix some issues with calculation of the IEEE802.15.4 header size.
2017-04-04 12:31:22 -06:00
Gregory Nutt
a6ae7d4ae3
6loWPAN: Fix an error in how reassembly timeouts work.
2017-04-04 09:08:48 -06:00
Juha Niskanen
9a29b9a327
stm32: stm32_flash: add EEPROM writing for STM32L15XX
2017-04-04 07:38:49 -06:00
Juha Niskanen
d64d4e02b4
sensors: lis2dh: fix hardfault when reading from unconfigured sensor
2017-04-04 07:38:49 -06:00