Gregory Nutt
61904da368
SAMV7: Add framework for USB DCD. Initial check-in is just the SAMA5 USB DCD with naming changes to get a clean compilation. Needs careful review and comparison with datasheet and, of course, testing
2015-03-23 14:06:53 -06:00
Gregory Nutt
79ff3618e4
Update some recent Tiva changes so that old LM3S parts at least still build (but have not been retested)
2015-03-23 11:21:26 -06:00
Gregory Nutt
fedc213eec
- ADC driver has been re-organized; configuration is now handled in code
...
instead of Kconfig to help reduce bloat and confusion.
- Timer changed to remove ADC coupling in Kconfig to code and moved
configuration up from arch/arm/src/tiva to configs/tm4c123g-launchpad/src.
- GPIO driver needed small fixes in the configuration routines and
discovered false-positive bugs in interrupt testing: interrupts are now
verified to actually be working reliably.
- Attempt to apply some consistency in the tiva arch/ level's interface
to the config/board/ level driver configuration.
From Calvin Maguranis
2015-03-23 09:12:52 -06:00
Gregory Nutt
a885c05861
PIC32MZ: Clone PIC32MX Ethernet driver to PIC32MZX (not yet verified)
2015-03-23 08:10:49 -06:00
Gregory Nutt
c52868bebe
PIC32MZ: Correct conversion of IRQ nubmers to IRSx register addresses. From Kristopher Tate
2015-03-22 08:41:54 -06:00
Gregory Nutt
60529baf3d
PIC32MZ: Add missing call to initialize peripheral clocking. From Kristopher Tate
2015-03-22 08:15:26 -06:00
Gregory Nutt
16ece4e4bc
PIC32MZ: PPS needs to start from the SFR base address. Fix from Kristopher Tate
2015-03-22 08:13:28 -06:00
Gregory Nutt
f172c0b17f
Fix backward help instructions in a Kconfig file
2015-03-21 17:02:15 -06:00
Gregory Nutt
0a13a27fca
More changes for PIC32MZ build under XC32
2015-03-21 16:38:24 -06:00
Gregory Nutt
4726c1e460
PIC23MX Starter Kit: Looks like we need to use a different linker script with Pinguino
2015-03-21 15:40:22 -06:00
Gregory Nutt
7d14b172ce
SAMV7: A little more USB-related stuff
2015-03-21 08:54:01 -06:00
Gregory Nutt
948531c352
SAMV7: Add configuration logic and clock setup for USB device
2015-03-21 07:28:59 -06:00
Gregory Nutt
36c523bd9d
SAMA5: Fix a typo in the Kconfig file
2015-03-21 06:22:04 -06:00
Gregory Nutt
e835af5840
SAMV7: Add USBHS register defintiion header file
2015-03-20 14:08:33 -06:00
Gregory Nutt
e68baa3073
Include chip/sam_spi.h in sam_spi.h
2015-03-20 11:09:36 -06:00
Gregory Nutt
5b3fe34ffb
SAMA5D3: Fix typos in timer/counter header file. From Bob Doiron
2015-03-20 09:19:10 -06:00
Gregory Nutt
db52134d47
STM32 RTC lower-half: Fix some errors that cause compilation failures. From shilo.xyz
2015-03-19 12:56:47 -06:00
Gregory Nutt
e319870ac9
SAMV5 EMAC: A few more fixes. Neccessary but not sufficient
2015-03-19 08:54:50 -06:00
Gregory Nutt
6db55da159
SAMV7 Ethernet: Fix an order problem that left RX and TX disabled
2015-03-18 18:07:07 -06:00
Gregory Nutt
fb3fe58b58
SAMV7: Add a sneak internal interface that will allow us to set the MAC address before NSH even starts
2015-03-18 17:23:40 -06:00
Gregory Nutt
7e95bfe8d0
SAMV7: Updates to Ethernet driver based on comparison with Atmel sample code. Add configuration for other PHY GPIOs. Still no Ethernet interrupts
2015-03-18 15:55:00 -06:00
Gregory Nutt
000381db37
PIC32MZ: Changes that will permit building of the PIC32MZ Start Kit configuration using MPLAB and the XC32 toolchain. From David Sidrane
2015-03-17 14:50:11 -06:00
Gregory Nutt
824f486bdf
SAMV7 Ethernet: Support getting IP address from the XULT AT24 EEPROM
2015-03-17 14:29:41 -06:00
Gregory Nutt
4ce927168f
SAMV7 EMAC: Fix range of MCK dividers
2015-03-17 11:19:46 -06:00
Gregory Nutt
ae433eaa84
SAMV7: Use D-Cache clean/flush/invalidate by range in EMAC and XDMAC drivers
2015-03-17 09:28:27 -06:00
Gregory Nutt
108f722626
Break ARMv7E-M cache operations into separate files; Finish the unimplemented cache operations
2015-03-17 08:48:41 -06:00
Gregory Nutt
a590bdc737
SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling
2015-03-16 13:51:37 -06:00
Gregory Nutt
8a73d9b8ea
SAMV7: Add Ethernet MAC register definition header file
2015-03-16 11:46:20 -06:00
Gregory Nutt
83a17af442
This commit enables HSMCI functionality in the SAMV71-XULT. TX DMA is, unfortunately, currently disabled.
2015-03-15 12:17:39 -06:00
Gregory Nutt
db2d9abcfa
SAMA5: Fix a bug in SAMA5 HSMCI. The bitfield mask and shift values were reversed resulting in a trashed value for the number of blocks in the BLOCKR register. This was sufficient to prevent DMA writes from working.
2015-03-15 09:35:48 -06:00
Gregory Nutt
c638c67ad4
Add umount2(). umount() is now a macro that just calls umount2() with flags = 0.
2015-03-14 16:48:45 -06:00
Gregory Nutt
88d3eab435
SAMV7 XDMA: Fix a problem with invalidating the cache on RX DMA
2015-03-14 15:25:32 -06:00
Gregory Nutt
801d556452
EFM32: Add I2C driver. From Pierre-noel Bouteville
2015-03-14 14:47:53 -06:00
Gregory Nutt
b24ad6ae63
SAMV7: More SDRAM logic. It does still does not work
2015-03-14 13:27:00 -06:00
Gregory Nutt
fe09227cd5
SAMV71-XULT: Add support for SDRAM (unverified)
2015-03-14 11:00:46 -06:00
Gregory Nutt
2976594cfe
Include correct chip file
2015-03-14 09:15:11 -06:00
Gregory Nutt
c32190c58d
SAMV7: Add SDRAMC register definition header file
2015-03-14 09:13:51 -06:00
Gregory Nutt
6b1202d17f
SAMV7 HSMCI: Change system bus interfaces seems to eliminate DMA failures.
2015-03-13 14:35:36 -06:00
Gregory Nutt
c2049956a4
Minor updates from initial debugging.
2015-03-13 13:46:27 -06:00
Gregory Nutt
0cae7563e8
SAMV7 HSMCI: Reading response registers at the wrong time can cause loss of response data.
2015-03-13 12:46:33 -06:00
Gregory Nutt
cbfe1c7699
SAMV7: Fix some cloning errors. SAMA5->SAM7
2015-03-13 10:38:10 -06:00
Gregory Nutt
a08378ce72
Fix a typo in a Cortex-M7 address
2015-03-13 10:37:21 -06:00
Gregory Nutt
265af48120
STM32 serial: Make input hardware flow-control work with RX DMA. From Jussi Kivilinna
2015-03-13 07:18:21 -06:00
Gregory Nutt
b8476c7ee8
STM32: Fix RX DMA setup for UART5. From Jussi Kivilinna.
2015-03-13 07:06:46 -06:00
Gregory Nutt
8f59fc8f64
SAMV7: Quick'n'dirty port of the SAMA5 HSMCI driver to the SAMV7
2015-03-12 18:03:41 -06:00
Gregory Nutt
0d79e315fd
SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out.
2015-03-12 16:00:38 -06:00
Gregory Nutt
26cf5a35a9
SAMV71-XULT: Enable I2C and the I2C tool in the NSH configuration
2015-03-12 12:27:06 -06:00
Gregory Nutt
9b6c7661a4
SAMV7: Add TWI/I2C driver (untested)
2015-03-12 10:58:11 -06:00
Gregory Nutt
ca48fbfc4a
SAMV7: Add SPI header files and driver
2015-03-12 09:12:37 -06:00
Gregory Nutt
f8c73c3499
stm32: usbdev: Fix stale initialization invalidating later NULL check. From Juha Niskanen
2015-03-12 08:08:50 -06:00
