Leif Jakob
5534e0c493
multiple fixes in nrf24l01 driver
...
- signal POLLIN if there is already data in the FIFO
- send ETIMEDOUT to userspace after 2 seconds if TX IRQ was not received
- handle FIFO overflow
- handle invalid pipes/empty FIFO
- multiple cosmetics (missing static, duplicate define, missing \n)
2017-03-10 23:21:49 +01:00
Andreas Bihlmaier
c0769c9988
Merged in andreasBihlmaier/nuttx/fix-as5048b (pull request #255 )
...
fix as5048b by adding missing frequency parameter
Approved-by: Gregory Nutt
2017-03-09 12:57:47 +00:00
ahb
e1da80af5b
fix as5048b by adding missing frequency parameter
2017-03-09 12:01:01 +01:00
ahb
164546a65c
increase number of supported PWM channels from 4 to 6
2017-03-09 11:54:37 +01:00
no1wudi
6f4b8c9e60
Merged in no1wudi/nuttx (pull request #241 )
...
fixed the debug method selection of ssd1306
Approved-by: Gregory Nutt
2017-03-07 13:36:26 +00:00
Janne Rosberg
ce2845c5c3
usbhost_cdcacm: fix tx outbuffer overflow and remove now invalid assert
2017-03-07 06:59:00 -06:00
no1wudi
5528b2836c
fixed the debug method selection of ssd1306
2017-03-07 19:49:18 +08:00
Maciej Wójcik
1e6ab4763c
typos
2017-03-05 13:04:07 +00:00
Gregory Nutt
c976a66f8d
net/drivers/skeleton.c: Back out serialization changes of the last commit. They are not necessary in the skeleton.c example because the calls to net_lock() at the beginning of each worker function will enforce serialization.
2017-03-04 11:33:36 -06:00
Gregory Nutt
e2eb5f1ae0
drivers/net: Add framework for serialization in the case where multiple low-priority work queues are used.
2017-03-04 09:45:09 -06:00
Gregory Nutt
a8363528dc
net/phy_notify.c: Call to arch_phy_irq() missing new interrupt argument parameter.
2017-03-03 16:08:21 -06:00
Gregory Nutt
86239d4a73
Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers.
2017-03-03 14:45:09 -06:00
Gregory Nutt
f4bad1a280
stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 16:34:37 -06:00
Gregory Nutt
f5f9d82d5a
arch_phy_irq: Now returns int instead of xcpt_t oldhandler. The oldhandler is useless after the changes to the interrupt argument. Also access an argument for the PHY interrupt. phy_notify.c driver changed to exploit new interrupt argument passing.
2017-03-02 08:43:33 -06:00
Maciej Wójcik
35b2448203
Merged in w8jcik/nuttx (pull request #232 )
...
some simple typos
Approved-by: Gregory Nutt
2017-03-01 15:25:42 +00:00
Mark Schulte
28226198a7
memlcd: Mark Schulte <mark@mjs.pw>
2017-03-01 08:52:58 -06:00
Maciej Wójcik
4a8aa6ae95
typos
2017-03-01 12:56:15 +01:00
Gregory Nutt
ac6e552ff7
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
2017-02-28 18:37:44 -06:00
Gregory Nutt
ded155c638
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
2017-02-28 18:22:58 -06:00
Gregory Nutt
02b1e1ec1a
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
2017-02-28 18:22:57 -06:00
Gregory Nutt
704df7bd39
IRQ arguments: Fix errors discovered in build testing
2017-02-27 19:28:24 -06:00
Gregory Nutt
67de2e5f66
Add argument to STM32 EXTI interrupt handlers.
2017-02-27 14:21:30 -06:00
Gregory Nutt
69c26cca50
Correct mimatched function prototype.
2017-02-27 12:24:34 -06:00
Gregory Nutt
7bd8da19b9
Missed some changes in the last commit.
2017-02-27 12:11:35 -06:00
Gregory Nutt
840c5935a3
Correct a typo from one of the preceding commits.
2017-02-27 11:58:20 -06:00
Gregory Nutt
a773f9412a
STMPE811 driver needs argument in interrupt handler
2017-02-27 11:41:48 -06:00
Gregory Nutt
b4ff7391f8
Convert more drivers to use use irq_attach with argument.
2017-02-27 10:44:13 -06:00
Gregory Nutt
4cd31be19d
Convert some serial drivers to use use irq_attach.
2017-02-27 08:55:21 -06:00
Gregory Nutt
f15b566254
Button interrupt handler needs argument parameter.
2017-02-27 07:35:34 -06:00
Mark Schulte
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
8ee2e8d8b0
Most Ethernet drviers: Check if the poll timer is running before restarting it at the end of each TX.
2017-02-24 15:58:17 -06:00
Maciej Wójcik
29b4b00068
drivers/spi/Kconfig: There is too much SPI in the configuration menu; SPI Driver Support menu is empty
2017-02-23 14:39:13 -06:00
Gregory Nutt
5e09de3703
drivers/tone.c: 50% duty needs to be expressed a a fixed precision number
2017-02-22 06:35:20 -06:00
Gregory Nutt
ae86d7a8c8
Fix mismatched function prototype.
2017-02-21 07:48:00 -06:00
Gregory Nutt
c776407f64
This should resolve issue #30 : Audio Tone Generator and PWM Multiple Output Channel options. I don't actually have a setup to verify it, however.
2017-02-20 17:26:56 -06:00
Gregory Nutt
a92a865be6
TABs instead of spaces in Kconfig
2017-02-20 14:29:56 -06:00
Gregory Nutt
6e32d74b33
Cosmetic changes from review of the last PR
2017-02-19 11:49:42 -06:00
raiden00
82cb38c824
drivers/sensors: Add driver for the ST L3GD20 3 axis gyro
2017-02-19 17:43:44 +01:00
Gregory Nutt
e29b50e00a
Fix recurring naming problem: KXTJ9 vs KXJT9.
2017-02-18 08:08:41 -06:00
David Sidrane
11d1b2e636
Typo mmcsd/mmcsd_sdio.c
2017-02-13 13:24:47 -10:00
Marc Rechté
d501ffc563
Kinetis SDHC driver fixes.
2017-02-09 11:28:30 -06:00
Alan Carvalho de Assis
248d5d3185
MMC/SD SDIO: Some drivers need to start DMA before sending CMD24 and some AFTER
2017-02-09 11:13:05 -06:00
Gregory Nutt
0df1c556dc
drivers/lcd: ssd1306_configspi() must have global scope.
2017-02-09 07:45:25 -06:00
Wolfgang Reißnegger
cfe7c4012e
USBMSC: Always set LUN readonly flag.
2017-02-08 17:17:19 -08:00
Gregory Nutt
9f859774a1
setvbuf: Add support for configuration of line buffering.
2017-02-08 11:28:24 -06:00
Gregory Nutt
764f503150
Remove duplicate setting for SDIO_DMA from drivers/mmcsd/Kconfig
2017-02-06 13:16:52 -06:00
Gregory Nutt
3dbdb3bb31
CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit
2017-01-31 11:52:00 -06:00
Gregory Nutt
2a4791f4ee
Removed dmasupported() method from the SDIO interface. That is now a bit in the cpapability set.
2017-01-31 09:51:15 -06:00
Gregory Nutt
9ac00a355f
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
Gregory Nutt
a70ea9d3bc
Typos withim mtd/ with Macronix MX25L. In NuttX/drivers/mtd/Make.defs letters X between M and 25 are missing. Noted by Oleg Evseev.
2017-01-30 07:26:38 -06:00
Alan Carvalho de Assis
c482437325
MMCSD_SDIO: Only wait for card ejected if card detection is supported
2017-01-26 07:44:17 -06:00
Gregory Nutt
ba2b345990
Remove a few remaining use of the obsolteted 'Compilation Switches' program section
2017-01-22 08:57:18 -06:00
Gregory Nutt
5e0c18b535
Merged in david_s5/nuttx/upstream_2_greg_ramtron (pull request #198 )
...
Adding missing CONFIG_ prefix
2017-01-20 20:48:22 +00:00
David Sidrane
ca895b978b
Adding missing CONFIG_ prefix
2017-01-20 10:45:50 -10:00
Gregory Nutt
08c001196b
drivers/: Remove all explicit use of 'hidden' macro _info. Code must never use this directly. Code must always use a debug macro such as info which is basic on _info but can be appropriately filtered.
2017-01-15 13:00:50 -06:00
Gregory Nutt
2d9668fbd2
Fix a typo in a comment
2017-01-12 16:24:41 -06:00
Aleksandr Vyhovanec
bf528f2071
packed_struct replaced by begin_packed_struct and end_packed_struct
2017-01-09 14:17:49 +03:00
David Sidrane
548108764a
BugFix:uart_ops_s portion of cdcacm will not be initalized with correct functions if CONFIG_SERIAL_DMA is lit.
...
This fixes the issses in a C99 compatible way
2016-12-17 04:29:41 -10:00
Gregory Nutt
4795d58e03
Back out most of 46dbbe837e. The order is correct -- or, rather, the order is the same as the order that response data is provided. Change the order will break all other drivers.
2016-12-15 07:16:24 -06:00
Gregory Nutt
ca92ecafa7
MMC/SD: Format changed from %d to %lu. Must cast argument to unsigned long to avoid crash on 64-bit machine.
2016-12-14 17:44:12 -06:00
Gregory Nutt
f4f32bc740
MMC/SD SDIO (again): This is really an endian-ness issue. Behavior should be different on big- vs little-endian machines.
2016-12-14 17:04:27 -06:00
Alan Carvalho de Assis
3c4a8d05b0
MMC/SD SDIO driver: Change the endianess order to read the return of long response command
2016-12-14 14:17:52 -06:00
Gregory Nutt
f063e4c5ac
Remove Calypso architecture support and support for Calypso SERCOMM driver.
2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b
Remove all Calypso board configurations
2016-12-13 18:24:49 -06:00
Gong Darcy
44b7975a5e
SSD1306: Fix errors in SPI mode configuration
2016-12-04 10:07:46 -06:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Gregory Nutt
ad3897531f
C5471 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 12:17:55 -06:00
Gregory Nutt
43459fe75e
DM09x0 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 11:42:15 -06:00
Gregory Nutt
eba1e076ec
PIC32MX/Z Ethernet: Now supports CONFIG_NET_NOINT
2016-12-03 09:50:14 -06:00
Gregory Nutt
bfa1da14e2
LM3S Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 08:32:49 -06:00
Gregory Nutt
c0cbea2550
Remove RGMP and RGMP drivers.
2016-12-02 09:49:33 -06:00
Janne Rosberg
8442bf66b9
usbhost_cdcacm: add CDC_SUBCLASS_ACM and CDC_PROTO_ATM to supported class and proto
2016-11-30 12:20:23 -06:00
Janne Rosberg
4b282f219a
usbhost_composite: fix end offset in usbhost_copyinterface()
2016-11-30 12:18:23 -06:00
Gregory Nutt
96be43b270
drivers/net/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER
2016-11-29 16:44:23 -06:00
Gregory Nutt
1793c1f8e1
Trivial, cosmetic change
2016-11-29 15:03:51 -06:00
Gregory Nutt
9ee3f3b933
sched_note: Permit spinlock and critical section notes in in-memory buffer iff sched_not_get() interfaces is disabled.
2016-11-28 18:36:26 -06:00
Gregory Nutt
d65be718c2
sched_note: Extend OS instrumentation to include some SMP events.
2016-11-27 17:14:57 -06:00
Gregory Nutt
0804286ad3
arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS.
2016-11-19 09:20:01 -06:00
Wolfgang Reißnegger
88539a7497
USBMSC: Fix length of mode6 sense reply packet.
2016-11-18 17:23:21 -08:00
Gregory Nutt
cdbc66addd
Merge branch 'master' of bitbucket.org:nuttx/nuttx
2016-11-18 09:30:40 -06:00
Gregory Nutt
936b55f608
drivers/net: Add option to use low-priority work queue to all drivers in drivers/net. Not yet added to all architecture-specific network drivers.
2016-11-18 09:22:49 -06:00
Gregory Nutt
175ec43628
Merged in slorquet/nuttx/timerfixes (pull request #171 )
...
Timerfixes
2016-11-18 14:45:36 +00:00
Gregory Nutt
52560bba37
ENC28J60: Allow either HP or LP work queue to be used.
2016-11-18 08:41:27 -06:00
Sebastien Lorquet
5363d0619a
Fix warnings
2016-11-18 15:26:08 +01:00
Gregory Nutt
47b52a2633
Fix an error in manually bringing in Sebastien's changes; Update some comments.
2016-11-17 16:15:06 -06:00
Gregory Nutt
9acd57c819
Fix up some naming and update some comments.
2016-11-17 15:50:39 -06:00
Gregory Nutt
19c1c9d78b
All timer lower half drivers. Port Sebastien's changes to all all other implementations of the timer lower half. Very many just and untested. Expect some problems.
2016-11-17 15:03:31 -06:00
Sebastien Lorquet
197cec58d2
timer driver: Use signal to notify of timer expiration. Add generic argument so that there can be additional usage.
2016-11-17 14:38:21 -06:00
Gregory Nutt
d4a048c0c6
Timer driver: Add hooks to support signal notification of timer expiration. Commented out because invasive interface changes would also be required to complete the implementation.
2016-11-17 12:41:11 -06:00
Gregory Nutt
ecb2d4cbc1
drivers/timer: Remove the TIOC_SETHANDLER IOCTL call. This calls directly from the timer driver into application code. That is non-standard, non-portable, and cannot be supported
2016-11-17 11:52:42 -06:00
Alan Carvalho de Assis
a6b7730f8c
Add Vishay VEML6070 driver and support for STM32F103-Minimum board
2016-11-13 11:44:28 -06:00
Marc Rechté
58c2cd2843
drivers/ioexpander: Add some debug output.
2016-11-08 07:46:25 -06:00
Gregory Nutt
b0dffdc2ca
Fix a number of header files with mismatched 'extern C {' and '}'
2016-11-05 07:25:05 -06:00
Gregory Nutt
6ff6cca1a0
Fix some mispellings of semaphore
2016-11-03 17:48:36 -06:00
Gregory Nutt
4fcbe8e410
drivers: Disable priority inheritance on all semaphores used for signaling
2016-11-03 11:00:47 -06:00
Gregory Nutt
47b043df1e
drivers/serial.c: Make sure that priority inheritance is not enabled for the signaling semaphores used in the serial driver.
2016-11-03 08:16:59 -06:00
Paul A. Patience
d89765e1d0
spi: Fix Kconfig warning
...
This commit moves the ARCH_HAVE_SPI options outside the check
for SPI. Those options don't depend on SPI, and Kconfig files
in arch/ enable them even if SPI isn't enabled.
Sourcing the driver's Kconfig in drivers/Kconfig only if
support for the driver is enabled prevents us from defining
these ARCH_HAVE options in the driver's Kconfig. We should
probably remove the other checks in drivers/Kconfig and check
if the drivers are enabled only in their Kconfig.
2016-11-02 13:16:12 -04:00
Gregory Nutt
8dd2494407
Review of last PR: Fix return value (ERROR is not a value return value in this context). Fix some spacing.
2016-11-01 15:13:09 -06:00
Aleksandr Vyhovanec
be1626ad7b
Added EEPROM timeout
2016-11-02 00:03:16 +03:00
Gregory Nutt
de6db52b52
Oops... Last commit had some garbage in the file
2016-10-24 15:36:11 -06:00
