sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
53,225 Commits 1 Branch 0 Tags 291 MiB
62af2993a4
Commit Graph

155 Commits

Author SHA1 Message Date
Tiago Medicci Serrano
96f83bb03a net: Enable CONFIG_NET_ARP_SEND by default 
Enable logic to send ARP requests if the target IP address mapping
does not appear in the ARP table.

Please check the comment in https://github.com/apache/nuttx/issues/12446#issuecomment-2145856778
 2024-06-06 02:40:16 +08:00
raiden00pl
b7db53b6e1 nrf52/common: support for lsm9ds1 uorb 2024-03-09 11:53:57 +08:00
raiden00pl
b3b543e093 arch/nrf52: add initial support for IEEE 802.15.4 
Supported features:

- frame transmition
- frame reception and filtering
- immediate ACK (incoming and outgoing)
- promiscuous mode
- delayed transmision
- radio events trace
- setting pending bit for all incoming Data Request frames
- un-slotted CSMA-CA

Work in progres features (some logic is present, but they require more work):

- beacon transmision (periodic transmition works, but requires verification)
- slotted CSMA-CA
- GTS

Fetures not implemented:

- enhanced ACK (Enh-ACK)
- enhanced beacon
- low power mode
- advanced features from IEEE 802.15.4e (DSME, TSCH)

Added examples for boards:

- nrf52832-dk: mrf24j40_6lowpan
- nrf52832-dk: mrf24j40_mac
- nrf52840-dk: ieee802154_6lowpan
- nrf52840-dk: ieee802154_mac
- nrf52840-dongle: ieee802154_mac
- nrf9160-dk-nrf52: ieee802154_6lowpan
- nrf9160-dk-nrf52: ieee802154_mac
 2024-02-18 07:40:41 -08:00
raiden00pl
4996f0cd16 boards/nrf{52|53|91}/common: add reset logic 2024-02-17 04:59:56 -08:00
raiden00pl
535a3dbb18 boards/{nrf52840-dk| nrf52840-dk}: use TIMER1 as hardware timer 
TIMER0 is reserved for SoftDevice and will be reserved for IEEE 802.15.4
so it's better to use another timer by default
 2024-01-28 09:46:29 -08:00
raiden00pl
5e3326be68 boards/nrf52/common/nrf52_progmem.h: fix comment 2024-01-28 09:46:24 -08:00
raiden00pl
ac5c47fcb6 nrf52832-dk: add timer example 2023-12-03 05:47:07 -08:00
chao an
fa943c11b3 cmake: correct cmake rule file name 
The rule of cmake file name should be CMakeLists.txt not CMakeList.txt

Signed-off-by: chao an <anchao@xiaomi.com>
 2023-10-21 11:00:27 +08:00
Alan Carvalho de Assis
444b6d9635 boards: Update all boards that were using CONFIG_NET_LL_GUARDSIZE=50 2023-10-16 08:55:21 +08:00
raiden00pl
cb04c0a928 boards/nrf52: remove CONFIG_ARMV7M_SYSTICK form tickless configurations 2023-09-29 21:02:46 +08:00
raiden00pl
3f1417ef8d boards: add nrf9160-dk board support (nrf52840 chip) 2023-09-25 23:06:39 +08:00
raiden00pl
11a3484e86 boards: add initial support for thingy91 board (nrf9160 and nrf52840 chips) 2023-09-24 19:38:47 +08:00
raiden00pl
3ad3b66e11 boards/thingy52: use RTT console as default 
External JLink is required to program the board, so the console via RTT
is available anyway. It is much more convenient to use than soldering the
P4 connector and working with an external UART converter.
 2023-09-22 19:46:43 +08:00
zhangyuan21
0efd4d0e12 usbdev: Split usbdev descriptor information 
The class device only handles descriptor information specific to the class,
and shared descriptor information is passed through parameters and
handled by the composite driver.

Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
 2023-09-06 02:29:32 +08:00
cuiziwei
4ec7af779d nuttx/boards:init_array.* needs to be executed in order 
When I try to set priorities in certain programs, such as init_priority(HIGH_PRIORITY), I've noticed that during linking, there's no guarantee that the programs will be compiled in the sequence I've specified based on priority. This has led to some runtime errors in my program.

I realized that in the ld file, when initializing dynamic arrays, there's no assurance of initializing init_array.* before init_array. This has resulted in runtime errors in the program. Consequently, I've rearranged the init_array.* in the ld file of NuttX to be placed before init_array and added a SORT operation to init_array.* to ensure accurate initialization based on priorities during linking.
 2023-08-29 22:54:37 +08:00
raiden00pl
af4a065efb nrf52840-dk: add lsm9ds1 sensor support 2023-08-27 10:05:05 +08:00
raiden00pl
3350609a8a boards/arduino-nano-33ble{-rev2}: use bool for leds state 2023-08-18 20:06:22 +08:00
simbit18
e374f327c1 Fix Kconfig style 
Remove spaces from Kconfig
 2023-08-18 08:13:26 +02:00
raiden00pl
a1d7b2961d boards/nrf52: add Arduino Nano 33 BLE Rev2 board 2023-08-14 20:42:59 +08:00
Brian Doherty
f444de0882 Initial port to Arduino Nano 33 BLE. 2023-08-14 11:11:50 +08:00
cuiziwei
25eb09c3bb nuttx/boards:add KEEP to *(.init_array .init_array.*) 
replace *(.init_array .init_array.*) with KEEP(*(.init_array .init_array.*)).

The KEEP statement within a linker script will instruct the linker to keep the specified section, even if no symbols inside it are referenced. This statement is used within the SECTIONS section of the linker script. This becomes relevant when garbage collection is performed at link time, enabled by passing the --gc-sections switch to the linker. The KEEP statement instructs the linker to use the specified section as a root node when creating a dependency graph, looking for unused sections. Essentially forcing the section to be marked as used.

Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
 2023-08-05 05:02:25 -07:00
raiden00pl
e64335f24c cmake: format Nordic boards 2023-07-25 06:08:54 -07:00
raiden00pl
f97199340e cmake: port missing nrf52 boards 2023-07-22 00:59:44 +08:00
raiden00pl
9da715db12 boards: use the example from NuttX-apps for all NimBLE configurations 2023-07-20 01:45:38 +08:00
raiden00pl
59e261e92f cmake: add initial support for nrf52 2023-07-10 22:24:44 +08:00
raiden00pl
0aa1af7ff1 boards/thingy52: add sx1509 support 
SX1509 is used to control various peripherals and RGB LEDs available on the board.
 2023-06-27 14:44:00 -03:00
Xiang Xiao
0eeca0f375 build: Replace "$(shell $(INCDIR) $(CC) ...)" with $(INCDIR_PREFIX) 
to unify the way to get include directories

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-06-23 00:11:25 +03:00
raiden00pl
235e0e92a8 boards/nrf52-feather: fix typo in I2C1 initialization 2023-06-01 18:34:54 +03:00
raiden00pl
37cdfeed9b boards/nrf52840-dk: add MCUboot configurations 
Added configurations:
- mcuboot_loader - MCUboot loader
- mcuboot_app - MCUboot compatible application.
  Needs to be signed manually:
    imgtool.py sign nuttx.hex nuttx_img.hex --align 8 -v 1.0.0 -H 0x200 -S 0x30000 --pad-header --pad
 2023-05-31 10:44:08 +08:00
raiden00pl
3c0ce99c01 boards/nrf52832-dk: add MCUboot configurations 
Added configurations:
- mcuboot_loader - MCUboot loader
- mcuboot_loader_minimal - MCUboot loader optimised for FLASH usage.
  Further optimization can be achieved by CONFIG_LTO_FULL=y.
- mcuboot_app - MCUboot compatible application.
  Needs to be signed manually:
  imgtool.py sign nuttx.hex nuttx_img.hex --align 8 -v 1.0.0 -H 0x200 -S 0x30000 --pad-header --pad
 2023-05-31 10:44:08 +08:00
raiden00pl
1facea635b nrf52: add MCUboot support 2023-05-31 10:44:08 +08:00
raiden00pl
4650c9f756 Documentation: move boards/nrf52 readmes to Documentation 2023-05-30 19:25:30 -07:00
raiden00pl
b9f9ba2600 boards/nrf52840-dongle: add usb support and usbnsh example 
This board is designed to work as a USB dongle, from now it is possible.
 2023-05-27 03:15:40 +08:00
raiden00pl
f646664cfb boards/nrf52: introduce common folder 
This is an initial step towards moving common logic for NRF52 boards into one place.
At this point, only initialization of the TIMER has been moved.
 2023-05-24 00:04:28 +08:00
raiden00pl
be7ee904e2 boards/nrf52: add initial support for Thingy:52 board 2023-05-19 17:42:17 +08:00
raiden00pl
4f86a62f91 boards/nrf52840-dk: add MX25 QSPI memory support 2023-04-22 01:12:27 +08:00
raiden00pl
b6397cd8d6 nrf52840-dk: add usbdev examples 2023-03-30 09:28:55 -03:00
raiden00pl
af21bb4889 boards/nrf52840-dk: add ostest_tickless configuration 2023-03-15 22:34:07 +01:00
raiden00pl
405f6a5d37 boards/nrf52832-dk: add ostest_tickless configuration 2023-03-15 22:34:07 +01:00
raiden00pl
ef9190379c boards/nrf52832-dk: add buttons example 2023-03-14 19:17:31 -03:00
raiden00pl
384cbc2013 boards/nrf52840-dk: add buttons example 2023-03-14 19:17:31 -03:00
raiden00pl
e3f2443fc3 boards/nrf52: normalize sdc configurations 2023-03-05 21:32:11 +02:00
raiden00pl
74ffdb0b49 boards/nrf52: update sdc configs 2023-03-03 09:41:17 +08:00
raiden00pl
535df527cb boards/nrf52840-dk: add sdc examples 2023-03-03 02:23:56 +08:00
raiden00pl
16a711c1e2 boards/nrf52832-dk: add sdc examples 2023-03-03 02:23:56 +08:00
Xiang Xiao
6d30726a1b Remove the unnecessary "return;" at the end of function 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-11-27 22:23:50 +01:00
Gustavo Henrique Nihei
83442aa70c boards: Convert DEBUGASSERT(false) into more intuitive DEBUGPANIC() 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2022-07-14 12:08:45 +08:00
Xiang Xiao
1f920e55d3 Move warning option from Make.defs to Toolchain.defs 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-05-15 15:40:35 +03:00
Xiang Xiao
21188ce37e boards/nrf52: Remove toolchain macro which is already defined in Toolchain.defs 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-05-15 15:40:35 +03:00
Xiang Xiao
468007307c boards/nrf52: Remove ARCHCCVERSION/ARCHCCMAJOR which isn't used 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-05-15 15:40:35 +03:00