Most of the functions used to set the peripherals are available for
all Espressif's chips. This commit uses this set of functions and
remove outdated functions that perform the same operations in a
chip level.
This commit updates the Wi-Fi and the BLE driver of ESP32. Most of
the changes rely on using the common sources and header files for
xtensa-based Espressif's SoCs.
The new Wi-Fi driver supports WPA3-SAE for both Station and SoftAP
mode. BLE's coexistence mode was enhanced according to the latest
libraries.
Please note that other sources required minor changes in order to
be compatible with the common sources.
Whenever a SPI flash operation will take place, it's necessary to
disable the cache and run no code from the flash. This includes
pausing the other CPU (when `CONFIG_SMP=y`). This commit prevents
an error to occur when the CPU core is evaluated before the task
is increased to the max priority.
Whenever a SPI flash operation will take place, it's necessary to
disable the cache and run no code from the flash. This includes
pausing the other CPU (when `CONFIG_SMP=y`). This commit prevents
an error to occur when the CPU core is evaluated before the task
is increased to the max priority.
adjust link options for userspace elf
specify system libs and apps lib to only link with nuttx target in flat build mode
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
Avoid using static mutex and recursive mutex as the resource to be
acquired/release. Instead, create a specific lock for each call if
it does not exist.
Avoid using static mutex and recursive mutex as the resource to be
acquired/release. Instead, create a specific lock for each call if
it does not exist.
Avoid using static mutex and recursive mutex as the resource to be
acquired/release. Instead, create a specific lock for each call if
it does not exist.
As __start must be placed at a precise location, a separate, explicit
input section is needed to guarantee this.
Why is this an issue ? NuttX uses --entry=__start which puts __start in
its correct location, but out-of-tree builds won't work, so it more robust
to use an explicit section for the startup code and enforce its placement
in the linker script.
This fixes build error (Werror):
Error: chip/stm32_foc.c:1918:12: error: 'stm32_foc_info_get' defined but not used [-Werror=unused-function]
1918 | static int stm32_foc_info_get(struct foc_dev_s *dev, struct foc_info_s *info)
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
If a context switch occurs in syscall, the g_running_task need to be recorded for assert logic.
This copies the logic from arm platforms
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
When entering the function from an external bootloader, the CPU could be using PSP. But the following
code expects MSP to be in use.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
We shouldn't panic the kernel when a user task excepts, we can just kill the user task and
it's children. Do this by returning to _exit() in kernel context.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Adds support for NXP i.MX9-series System-on-Module chips.
- Support for i.MX93 is added
- CPU is Cortex A55 / ARMv8.2A
- The chip also contains a Cortex M33, but no support is provided
- Supported drivers include lpuart only for now
We can decide whether use trustzone
After this patch, we can support the following mode:
ARCH_HAVE_TRUSTZONE ARCH_TRUSTZONE_DISABLED ARCH_TRUSTZONE_SECURE ARCH_TRUSTZONE_NONSECURE
Without Security Extensions n n n n
CHIP have NO trustzone
With Security Extensions y y n n
Only one bin in sec mode
With Security Extensions y n y n
TEE bin in sec mode
With Security Extensions y n n y
REE bin in non-sec mode
Signed-off-by: ligd <liguiding1@xiaomi.com>
Purpose: make the the os crash when busyloop with interrupt disable
Follow the arm gicv2 spec, if we want to use the IRQ and FIQ
simultaneously when not using the processor Security Externsions.
We should:
1. IRQ to Group 1 and FIQ to Group 0;
2. Set CICC_CTLR.FIQEn to 1;
Then in NuttX:
1. implement the arm_decodefiq and directly crash in it;
2. provide interface to change the IRQ to FIQ, e.g. change the
watchdog IRQ to FIQ, so the watchdog can trigger even with the
interrupt disabled (up_irq_save() called);
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
Currently only FLAT mode development can enjoy cmake build system. This
patch tries to add initial kernel mode support. It can build NuttX kernel
and libproxies.a, the latter will be further checked though.
This can already help to build an AMP remote node image as it can share
userland apps living in the AMP master node.
Major changes:
- in top folder:
- CMakeLists.txt adjust for KERNEL mode, separate from PROTECTED mode.
- in `syscall`:
- CMakeLists.txt add mksyscall target for stubs/proxies generation
- in `syscall/stubs`:
- CMakeLists.txt use dependency to mksyscall
- in `syscall/proxies`:
- CMakeLists.txt use dependency to mksyscall
- in `arch`:
- CMakeLists.txt separate KERNEL from PROTECTED mode.
- in `arch/risc-v/src`:
- CMakeLists.txt separate from PROTECTED mode, add sub folders.
- in `arch/risc-v/common`:
- CMakeLists.txt add sources and sub-folders for KERNEL mode.
- in `arch/risc-v/k230`:
- CMakeLists.txt add sources for KERNEL mode.
- in `boards/risc-v/k230/canmv230/src`:
- CMakeLists.txt adjust k230 specific scripts for kernel mode.
New additions:
- in `arch/risc-v/src/nuttsbi/` add CMakeLists.txt
- in `arch/risc-v/src/common/supervisor/` add CMakeLists.txt
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This patch fixes the issue that k230_hart_is_big() doesn't work in
S-mode. It also adds convenient debug macros to ease debugging process
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Some stm32 has alternate USART6 pinout on G9/G14 but others have it
on A12/A11. Unfortunately it's very difficult to make proper ifdefs for
this since position is based on package (and pincount) and not chip
itself. Creating such list would take a lot of time. Because of that
I just added another possible config for this pin and moved responsibility
of proper selection onto board code.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Onewire driver wants to use "struct up_dev_s *priv", which is extracted
from "struct uart_dev_s" and "struct inode". But inode and uart dev are
only declared when TERMIOS or BSDCOMPAT is also enabled. Without these
driver fails to compile with missing declaration errors. Adding some
additional "#if defined()" to these declarations fix the issue and driver
compiles and works properly (tested with ds18b20 temp sensor).
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
This driver is used with QEMU, to make it possible
to use networking.
This is not the MAC in ESP32, however, it can be used with QEMU.
The code was shamelessly copied from 31dac92e5f
