This commit brings 3 fixes/improvements applied to the Kconfig options
for SPI Flash file system support on board bring-up:
- (925e8f9) Optionally mount SPI Flash MTD on bring-up
- (f74c6f7) Transform SPI Flash FS deps into reverse deps
- (9056cab) Select MTD_SMART if SmartFS is selected for SPI Flash MTD
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Currently, when no file system is selected, the "choice" lists zero
entries, which is very confusing to the user. To handle this, the
"choice" options have their dependencies ("depends on") transformed into
reverse dependencies ("select").
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Give the user the option to simply register the SPI Flash MTD as a
device node on /dev.
Currently, this is achievable only when SmartFS (which is the default FS
option) is disabled by force. This behavior is fixed by using the
"optional" Kconfig keyword, which makes the "choice" selectable.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
This adds DDR training. The training has a small chance of failing,
and then the training is restarted.
DDR training cannot be done meaningfully while the software is
in DDR. If the system is intended to run from eNVM, like a
bootloader, the linker script should be tuned to utilize the envm
region as follows:
envm (rx) : ORIGIN = 0x20220100, LENGTH = 128K - 256
l2lim (rwx) : ORIGIN = 0x08000000, LENGTH = 1024k
256 bytes are reserved for the system; The fixed block may be
installed from the 'hart-software-services' -repository:
https://github.com/polarfire-soc/hart-software-services.git
For example, the 256-byte image: hss-envm-wrapper-bm1-dummySbic.bin
may be prepended on the nuttx bootloader image in the following
manner:
cat hss-envm-wrapper-bm1-dummySbic.bin > nuttx_bootloader.bin
cat nuttx.bin >> nuttx_bootloader.bin
riscv64-unknown-elf-objcopy -I binary -O ihex --change-section-lma
*+0x20220000 nuttx_bootloader.bin flashable_image.hex
This provides an image 'flashable_image.hex' that may be flashed on
the eNVM region via Microsemi Libero tool.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Gregory Nutt has submitted the SGA
Florian Olbrich has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Since the tests were removed from the drivers, there is no need for
these defconfigs anymore.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
-march=rv64gc -mabi=lp64 does not resolve lib paths for
riscv64-unknown-elf-gcc resulting in lib not found errors.
Changing it to -march=rv64imafc -mabi=lp64f that is the default
used in Sipeed repositories.
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
Gregory Nutt has submitted the SGA
Elfaro Lab SL has submitted the SGA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
Paul Alexander Patience has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
During the lcd1602 tests on our internal CI we noticed that the
lcd1602 was failing because there is not a I2C display in the
emulated board on QEMU. It is better to remove the "return ret"
from the bringup because the user will see the error anyway.
Gregory Nutt has submitted the SGA
Bill Gatliff has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Rearchitect video driver:
- Define two video I/F(struct imgsensor_ops_s and struct imgdata_ops_s),
and support them.
- CISIF driver supports new video I/F struct imgdata_ops_s.
- ISX012 driver supports new video I/F struct imgsensor_ops_s.
- Move ISX012 driver to general driver directory.
Alan Carvalho de Assis. has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Previous default value was not sufficient and was resulting in
unexpected behavior when some log domains were enabled
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
This commit moves the Wi-Fi initialization to
Wi-Fi specific file and to spiflash initialization.
It also reserves one partition for Wi-Fi use and for general use,
and makes it possible to me mounted by several FS.
This is only useful when the path to binary files (e.g. bootloader) is
provided via the ESPTOOL_BINDIR variable.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
This reverts commit 45672c269d.
Because:
* It's very confusing to have cc as LD.
* I don't see what "-nostartfiles -nodefaultlibs" in LDFLAGS are
supposed to do when we use LD directly. It would be simpler to
remove them from our LDFLAGS.
Verge Aero has submitted the SGA
Anthony Merlino has submitted the SGA
Gregory Nutt has submitted the SGA
Sebastien Lorquet has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This commit removes the initialization of the Wi-Fi partition
from the Wi-Fi board logic and moves it to the SPI Flash board code.
It creates 2 different partition (one for Wi-Fi and one for general
use).
It also allows these partitions to be mounted over several FSs.
When SIM_SPI is valid, a specified Linux SPI device ‘spidevN.P’(N is bus number and P is CS number) is attached to nuttx simulator, shown as 'spi0' under /dev. One may type spi command (need SPITOOL valid) in NSH to control the Linux SPI and exchange data, other devices such sensors can use it to debug in simulator on a Ubuntu PC. Note that a USB<>SPI module (e.g. CH341A/B) should be plugged in to achieve Linux SPI ports.
Change-Id: I275b2c2bbf6d14bcdf514c89efb9a2264d69e9a3
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
several configs are used for testing and need the BSD components
more information about license can be found here
https://www.apache.org/legal/resolved.html#category-a
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
several configs are used for testing and need the BSD components
more information about license can be found here
https://www.apache.org/legal/resolved.html#category-a
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
several configs are used for testing and need the BSD components
more information about license can be found here
https://www.apache.org/legal/resolved.html#category-a
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This commit adds option for Teensy 4.x board to initialize CAN3 as can0.
The reason of this is the CAN FD capability of CAN3. This commit also
disables tickless mode support for pikron-bb configuration as this option
started causing hard faults which are yet to be solved.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
By default the components with BSD license should be disabled
NOTE:
the BLUETOOTH components was enabled in a non bluetooth config
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
By default the Bluetooth configuration is disabled due to BSD license
Please enable the use of BSD licenses and the Bluetooth config
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
By default the components with BSD license are disabled.
NOTE:
We are making an exception and enable the BSD components for
Simulator build to be able to thest the functionality.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Add a driver for CorePWM block, which can be instantiated on PolarFire SOC FPGA
This supports 2 CorePWM blocks on the FPGA. One CorePWM block provides 8 PWM output signals
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Alan Carvalho de Assis has submitted the ICLA
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
When trying to reproduce a reported issue with telnetd,
it took me a bit to find out a working config with telnetd.
I don't want to repeat the process again in future.
OTOH, I don't feel it's worth to have a separate config for this.
Enable a few things convenient for testing network stuff
- telnetd
- iperf
- NET_STATISTICS
- Bump NET_NACTIVESOCKETS
Stack related
- Enable interrupt stack
- Tweak stack sizes
- STACK_COLORATION
- SYSTEM_STACKMONITOR
Debug stuff
- Enable assertions
- Enable some WARN/ERROR logs
Misc
- Disable C++ as it does nothing for the rest of the config and
it's expensive (involving a download of the library)
Summary:
- I noticed that the RNDIS networking is unstable when running
nxplayer + command execution via telnet
- This commit is a workaround to fix this issue by disabling
CONFIG_TCP_WRITE_BUFFERS. Also, CONFIG_SENDFILE_BUFSIZE is
increased to improve the webserver performance.
Impact:
- spresense:rndis_smp only
Testing:
- Tested with nxplayer, telnetd and webserver
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This command enables the application to perform the final steps of the
booting process prior to finally switching the execution to another
firmware image.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Summary:
- This commit adds RTC and NTP client to wapi_smp/defconfig
Impact:
- None
Testing:
- Tested with ntpcstart & date
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Currently the "esp32_spiflash_alloc_mtdpart" allocates a
statically-defined partition from "offset" and "size" set via
Kconfig.
This commit changes the function interface to receive those information
as arguments, enabling the creation of multiple MTD partitions with
different offsets and sizes.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
so the source code compiled by host environment can include config.h
directly and then avoid pass Kconfig option through Makefile manually
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic9fe6f846082cef2d0808dc717df8ae6ed929edf
BOARDIOC_SWITCH_BOOT is required to communicate the boot partition from
userspace (OTA subsystem) to board. It can be used to change the system
boot behavior. So it's useful for A/B boot or even single boot case.
For the board support A/B boot case:
1. Download the new image from the sever
2. Write the new image to the alternative partition
3. Call BOARDCTL_SWITCH_BOOT to the alternative system
For single boot partition case:
1. Download the new image from the sever
2. Call BOARDCTL_SWITCH_BOOT and reboot to a small system
3. Write the new image to the main partition in the small system
4. Call BOARDCTL_SWITCH_BOOT again to the main system
Change-Id: Ifebb495784ecf06842946a249bec64f75dce894f
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
The patch
Make: use gcc as LD
introduced use of GCC wrapper as linker. LD variable references GCC
executable now. But when GCC wrapper s used to build relocatable
loadable objects (ELF executables and modules) then it causes
linking of toolchain default libc and other libraries even when -r
is usd. Another problem is that incorrect multiarch variant is selected
for libraries search and possibly even for LTO or C++ templates
instantiating and other glue code which causes fails during linking
if CFLAGS selects non/default miltiarch variant.
Corresponding CFLAGS are passed to LDMODULEFLAGS and LDELFFLAGS
as well as -nostartfiles -nodefaultlibs options.
Separate line is used to easily find and adjust lines if link
process is changed in future.
Signed-off-by: Pavel Pisa <ppisa@pikron.com>
Gregory Nutt has submitted the SGA
Zilogic Systems has submitted the SGA
Uniquix Tecnologia has submitted the SGA
Michael Jung has submitted the ICLA
Alan Carvalho de Assis has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
the common scripts.
This allows having a more costumized linker script per board.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
1. Added check for repeated connection wifi operations.
2. Invoke the carrier on/off operation in the wrong place.
3. The RTC initialization time is incorrect.
4. Reserve 32K I-Cache space in the linker script.
5. Increase the size of the wifi firmware receiving buffer.
Signed-off-by: Virus.V <virusv@live.com>
ld: /github/workspace/sources/nuttx/nuttx section `.data' will not fit in region `locked'
ld: section .paged LMA [0000000011034000,0000000011040fa3] overlaps section .data LMA [0000000011033ff4,00000000110340e3]
ld: region `locked' overflowed by 228 bytes
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- This commit adds CONFIG_NET_TCP_WRITE_BUFFERS=y to
rndis and rndis_smp defconfigs
Impact:
- webserver performance will be improved
Testing:
- Tested with nxplayer, telnetd, webserver, iperf
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds the following to smp/defconfig
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_STACK_COLORATION=y
Impact:
- None
Testing:
- Tested with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit removes SMP features from nsh/defconfig
because it's still unstable
Impact:
- None
Testing:
- None
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
to avoid the follow link error:
ld: /github/workspace/sources/nuttx/nuttx section `.data' will not fit in region `flash'
ld: region `flash' overflowed by 4 bytes
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that spresense:rndis_smp and spresense:wifi_smp
do not boot due to the recent change in nx_start.c
- As the result of the discussion, I understand that we have to
add CONFIG_BOARD_LATE_INITIALIZE=y for SMP
Impact:
- spresense only
Testing:
- Tested with spresense:rndis_smp and spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
