sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
33,937 Commits 1 Branch 0 Tags 291 MiB
641a98a434
Commit Graph

729 Commits

Author SHA1 Message Date
Gregory Nutt
641a98a434 arch/: The saved return register state is available on the user stack. Thic commit reorders some logic so that certain, critical registers are preserved in the TCB. This does not make the logic 100% secure, but does prevent some obvious things. sched/signal/sig_delivery: Add a flag to the TCB to indicate that we are in a signal handler. Use this flag to assure that a there a never attempts to nest signal handling operations on a thread. This was guaranteed before but when locking of pre-emption during signal delivering was eliminated in a previous commit, there was a remote possibility of an attempt to do nested signal handling. This flag assures that there is only one signal handled at a time. 2019-02-03 15:29:47 -06:00
Xiang Xiao
763ba51b78 arch/xxx/src/xxx/up_assert.c: Dump CPU0 IDLE stack only when PID equals 0. IDLE threads of other CPUs do not need this special check 2019-01-26 10:59:23 -06:00
ligd
5a6108c172 arch/xxx/src/common/up_initialize.c: Move up_pminitialize() after timer_initialize() 2019-01-26 07:32:14 -06:00
Gregory Nutt
db24306435 arch/assertion logic: Fix additional places where the test for an IDLE task is incorrect. It is not invalid in all configurations to check for PID==0. However, the logic fixed in these places lackes sufficient intelligence to find the right stack for the CPU IDLE thread and could still show the wrong stack. 2018-12-18 17:45:46 -06:00
Gregory Nutt
ec9265aa95 arch assertions: Correct duplicated logic from commit dbf01d12b7. Checking for PID == zero is not a valid way to test for the IDLE task in all configurations! This is only true in the single CPU configuration. In multiple CPU configurations, there will be a separate IDLE task for each CPU with a different PID. 2018-12-18 17:35:42 -06:00
Gregory Nutt
0af39e1493 arch/: Update all _exit() implementations for all architectures so that they correctly called the scheduler instumentation layer for the new task that runs when the old one exits. This missing instrumentation was confusing the Critical Section Monitor logic with uses this instrumentation to track the state of critical sections. 2018-11-24 18:20:57 -06:00
Gregory Nutt
7a45fc6f1c arch/arm/src/max326xx: Add framework for MAX326XX standard DMA support. 2018-11-20 08:09:03 -06:00
Xiang Xiao
dbf01d12b7 Assertions: Identify the running task correctly when dumping task state information. It takes time to switch to the target task after g_readytorun has been modified. If panic/assert happen during this period, the dump will contain the incorrect and confusing information due to the difference between the real running task and the return value of this_task(). This change resolve this problem by adding g_running_task to track the real running task through the context switch. 2018-11-15 07:11:51 -06:00
Xiang Xiao
543f4ed8ec arch/ all assertion functions: up_assert move the register dump to first make the more important info first 2018-11-11 12:53:59 -06:00
Xiang Xiao
dfe788be25 arch/ all assertion functinos: up_stackdump dump the full stack if stack overflow the stack info is very useful to find the backtrace 2018-11-11 12:52:36 -06:00
Gregory Nutt
2b3ec4172d arch/: Add 'BOARD_ASSERT_RESET_VALUE' in config/Kconfig and replace reboot status '0' to 'CONFIG_BOARD_ASSERT_RESET_VALUE'. 2018-11-10 14:06:46 -06:00
dongjianli
19e16cb1ba up_internal.h: Define out the prototype for up_netinitialize() if CONFIG_NETDEV_LATEINIT is also defined 2018-08-24 14:50:45 -06:00
Xiang Xiao
e1202d2ed3 Replace all ASSERT with DEBUGASSERT to save the code space 2018-08-24 06:58:30 -06:00
Xiang Xiao
467d2a58ea Replace non critical PANIC with DEBUGPANIC to save the code space 2018-08-24 06:21:15 -06:00
xuanlin
2c93467436 pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator. 2018-08-23 09:49:20 -06:00
Xiang Xiao
a465b6f0d4 configs/: Change CONFIG_BOARD_RESET_ON_CRASH to CONFIG_BOARD_RESET_ON_ASSERT, arch/: Implement call to board_reset() if in all implementations of up_assert() when CONFIG_BOARD_RESET_ON_ASSERT=y. 2018-08-22 17:04:39 -06:00
Gregory Nutt
cba0ddad0e arch/: Most some common debug configuration settings out of header files and into Kconfig files where they belong. 2018-08-19 14:55:49 -06:00
Gregory Nutt
c790450ba2 Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer necessary now that we have apps/examples/calib_udelay. 2018-08-19 10:06:36 -06:00
Gregory Nutt
8c61c2f31b Remove trailing spaces at the end of lines. 2018-08-13 07:39:38 -06:00
Gregory Nutt
c2267a57a0 Kconfig files: Fix several errors noted by Alex Denisov in Bitbucket issue 115. 2018-08-05 10:48:02 -06:00
Gregory Nutt
a94e3284b3 syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic. 2018-06-07 16:29:16 -06:00
Gregory Nutt
977d41d519 Based on a change recommended by Mark Shulte: 
Signal handlers maybe run with interrupts enabled or disabled, depending on how the task the received the signal was blocked. (i.e.: If sem_wait() is called, then we disable interrupts, then block the currently running task). This could be dangerous, because user code would be running with interrupts disabled.

This change forces interrupts to be enabled in up_sigdeliver() before executing the signal handler calling up_irq_enable() explicitly.  This is safe because, when we return to normal execution, interrupts will be restored to their previous state when the signal handler returns.
 2018-06-06 09:54:30 -06:00
Gregory Nutt
9222f50e1c arch/: Make sure the up_irq_enable() is available on all architectures. I will not be able to test all of these new versions of this function so this may break things for awhile. 2018-06-06 09:25:40 -06:00
Gregory Nutt
d52c63f632 Change all references from OSX to macOS 2018-06-01 13:25:50 -06:00
Gregory Nutt
f2a89813f2 Build system: Remove fixed lib/ subdirectory and its content. Replace with new directory called staging/ that is created dynamically when building and removed when 'make clean' is done. This both improves the name and eliminates a garbage directory from the repository. 2018-05-29 11:36:21 -06:00
Gregory Nutt
de6b13b3ab Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required. 2018-03-04 08:07:07 -06:00
Gregory Nutt
1567b82429 Make sure that labeling is used consistently in all function headers (part 2). 2018-02-01 12:03:55 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
eb79a575f6 Fix a few places where there was a semicolon following the 'if' condition, makeing the following logic unconditional. 2017-10-10 14:24:13 -06:00
Gregory Nutt
5b04c25dcd drivers/serial/tcdrain: tcdrain() was recently added to the NuttX C library. But there is a problem. The specification of tcdrain() requires that it be a cancellation point. In order to do this, tcdrain was moved from the C library into the OS and the addition cancellation point hooks were added. In non-FLAT builds, access via system calls is also now supported. 2017-10-06 10:55:36 -06:00
Gregory Nutt
9568600ab1 Squashed commit of the following: 
This commit backs out most of commit b4747286b1.  That change was added because sem_wait() would sometimes cause cancellation points inappropriated.  But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.

    In the OS, all calls to sem_wait() changed to nxsem_wait().  nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.

    In all OS functions (not libraries), change sem_wait() to nxsem_wait().  This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.

    sched/semaphore:  Add the function nxsem_wait().  This is a new internal OS interface.  It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
 2017-10-04 15:22:27 -06:00
Gregory Nutt
42a0796615 Squashed commit of the following: 
sched/semaphore:  Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable.  Changed all references to sem_post in the OS to nxsem_post().

    sched/semaphore:  Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable.  Changed all references to sem_destroy() in the OS to nxsem_destroy().

    libc/semaphore and sched/semaphore:  Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable.  Changed all references to sem_setprotocol in the OS to nxsem_setprotocol().  sem_getprotocol() was not used in the OS
 2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552 Squashed commit of the following: 
libc/semaphore:  Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable.  Changed all references to sem_getvalue in the OS to nxsem_getvalue().

    sched/semaphore:  Rename all internal private functions from sem_xyz to nxsem_xyz.  The sem_ prefix is (will be) reserved only for the application semaphore interfaces.

    libc/semaphore:  Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable.  Changed all references to sem_init in the OS to nxsem_init().

    sched/semaphore:  Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.

    sched/semaphoate:  Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
 2017-10-03 12:52:31 -06:00
Gregory Nutt
1c5ec07414 arch/: Remove dangling space at the end of lines. 2017-06-28 13:16:48 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Gregory Nutt
87a4181ba3 cosmetic changes 2017-04-29 09:30:17 -06:00
Gregory Nutt
b6b16bf4da Fix forward references that were mangled in last large changes. 2017-04-29 06:59:35 -06:00
Sebastien Lorquet
c70d797229 misc archs 2017-04-28 18:24:06 +02:00
Gregory Nutt
2f9028b547 Remove all remaining references to setenv.h and setenv.bat. 2017-04-26 10:28:37 -06:00
Gregory Nutt
a55e937643 Correct mispelling 2017-04-22 17:03:34 -06:00
Gregory Nutt
bfb93338f6 Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled. 2017-04-20 16:08:49 -06:00
Gregory Nutt
4c82827ab1 board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 14:37:22 -06:00
Gregory Nutt
274d367984 Fix another compile problem found in build testing. 2017-02-28 16:25:21 -06:00
Gregory Nutt
a581e9206d Convert remaining serial drivers to use use irq_attach. 2017-02-27 10:27:14 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch 
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
 2017-02-27 06:27:56 -06:00
Gregory Nutt
1d290c2b37 setvbuf: Add support for disabling I/O buffering. Initially cut; untested. 2017-02-09 09:24:44 -06:00
Gregory Nutt
62a1f6f110 up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list. 2017-02-07 10:35:04 -06:00
Gregory Nutt
3ed091376c In all implementations of _exit(), use enter_critical_section() vs. disabling local interrupts. 2017-01-13 11:08:24 -06:00
Gregory Nutt
13d00344c9 Add configuration to prevent selection of Windows native toolchains when using Ubuntu under Windows 10 2017-01-02 07:16:47 -06:00
Gregory Nutt
3a0413c048 Back out most of 34be3e7c3c and update README again. Windows native tools cannot be used with Ubuntu under Windows 10 now. For Cygwin, that support depends on the 'cygpath -w' tool to convert POSIX paths to Windows paths. There is no corresponding tool for Ubuntu under Windows 10. 2017-01-01 16:29:03 -06:00