Commit Graph

3261 Commits

Author SHA1 Message Date
Gregory Nutt
48da5aa496 sched/pthread/: CRITICAL BUGFIX: Logic was wiping out the indication that of the type of a pthread. Hence, it could be confused as a task. Found because this was causing a crash when /proc/nnn/cmdline was printed. 2015-11-28 10:05:36 -06:00
Ken Pettit
5821af1bbe drivers/mtd: Add support for /dev/smart loop device. From Ken Petit 2015-11-28 09:00:26 -06:00
Gregory Nutt
e4236941c6 net/net_procfs.c: Add basic support for networking procfs entries 2015-11-27 12:33:58 -06:00
Gregory Nutt
2a93c66948 include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics. 2015-11-26 12:08:09 -06:00
Gregory Nutt
ed35eb0f8d drivers/loop: Add a loop character device that can be used to setup and teardown loop devices 2015-11-25 17:13:56 -06:00
Ken Pettit
d4a58af380 drivers/mtd/mtd/mtd_procfs/c and include/nuttx/mtd/mtd.h: Add an interface to un-regiser an MTD procfs entry.
drivers/mtd/filemtd.c:  New new MTD conversion layer that will convert a regular file (or driver file) to an MTD device.  This is useful for testing on the simulation using the hostfs.

From Ken Petit
2015-11-25 14:46:28 -06:00
Marco Krahl
b1b97e89c8 drivers/lcd/ili9432.c: Fixed errors in orientation. Portrait, RPortrait, and RLandscript should work correly now. They were displayed mirrored. From Marco Krahl 2015-11-25 13:01:37 -06:00
Gregory Nutt
fb0a148812 Update ChangeLog/TODO 2015-11-25 12:02:25 -06:00
Gregory Nutt
8f5047323f Update ChangeLog and submodules 2015-11-25 08:38:58 -06:00
Ken Pettit
c0b9dcf8a9 fs/hostfs: Add a special file system for use with simulator that supports access to the host file system from the simulation. From Ken Petit 2015-11-25 08:26:26 -06:00
Gregory Nutt
6230e6e199 size_t should be 64-bits on a 64-bit machine. mmsize_t should be 32-bits (unless CONFIG_MM_SMALL is selected). This commit backs out the last change to stddef.h 2015-11-23 12:03:36 -06:00
Gregory Nutt
54549ef082 Revert "Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'"
This reverts commit 96faf0fa3251ca10a17daddc728d931be5a206e0.
2015-11-22 10:15:06 -06:00
Gregory Nutt
64e8f12e2b Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'
directory and build.
2015-11-22 10:07:35 -06:00
Gregory Nutt
006528b144 Add support for freopen() 2015-11-22 08:39:17 -06:00
Gregory Nutt
84a5f846c9 open() has been extended. You can now open block drivers and access them just as you can character drivers. For example, you can hexdump a block device. 2015-11-21 11:24:55 -06:00
Gregory Nutt
38c9d42e21 drivers/timers/pcf85263.c: Add a driver for the NXP PCF85263 I2C RTC 2015-11-20 17:36:10 -06:00
Gregory Nutt
4b29bcee7f Rename up_rtcinitialize to up_rtc_initialize so that it looks like other RTC interfaces 2015-11-20 08:27:52 -06:00
Ken Pettit
d30b73be82 W25: Add support for byte write mode. From Ken Petit 2015-11-20 07:34:07 -06:00
Ken Pettit
7b590ec9a2 drivers/mtd/smart.c Fixed SmartFS wear level error that occurs when the logical sector size is too small to save all wear level status bytes in a single sector. Logical sectors 1 and 2 were simply not being allocated and then the read_sector and write_sector routines were failing. From Ken Petit 2015-11-18 18:12:06 -06:00
Gregory Nutt
687cea60b3 Add basic support for the SAME70-Xplained board 2015-11-18 13:57:02 -06:00
Gregory Nutt
622ea95ab1 drivers/timers/ds3213.c: Extend to include support for the DS1307 RTC 2015-11-18 08:43:19 -06:00
Gregory Nutt
4579f0c1fc Add a command to boardctl() to obtain a baord unique ID 2015-11-18 07:31:53 -06:00
Gregory Nutt
0d18b13a16 Update ChangeLog 2015-11-18 07:09:59 -06:00
Ken Pettit
f0f7dd9956 drivers/mtd/smart.c: Fix a Smart wear-leveling bug. From Ken Petit 2015-11-18 07:01:13 -06:00
Ken Pettit
7e58e4c4cf W25: Fix W25 page read/write logic 2015-11-18 06:56:53 -06:00
Gregory Nutt
9d0984e21e Update ChangeLog 2015-11-17 17:21:36 -06:00
Gregory Nutt
45530a77d4 Add support for DS3231 I2C RTC. Untested on initial commit. 2015-11-17 14:07:55 -06:00
Gregory Nutt
724901ceb9 Add support for multiple AT24xx EEPROM devices 2015-11-17 07:40:17 -06:00
Gregory Nutt
580529ba23 crypto/aes.c: Make refernce to key const 2015-11-16 14:30:43 -06:00
Gregory Nutt
2ae7485a57 Update ChangeLog 2015-11-16 10:47:21 -06:00
Gregory Nutt
457796d39e Update ChangeLog 2015-11-14 12:15:38 -06:00
Max Neklyudov
d54a39832a Implement high level DMA infrastructure for serial devices 2015-11-12 14:16:19 -06:00
Gregory Nutt
ef59f83a38 drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h 2015-11-12 13:40:18 -06:00
Gregory Nutt
5eaf368d16 progmem.h: Cosmetic updates to comments 2015-11-12 12:30:15 -06:00
Gregory Nutt
896834002a BCH driver should forward ioctl commands to the contained block driver 2015-11-09 11:47:25 -06:00
Gregory Nutt
b2bdba0824 S25FL1 FLASH driver: Fix return value from the bwrite() method 2015-11-07 11:26:53 -06:00
Gregory Nutt
f5b82db9b0 Update ChangeLog 2015-11-06 11:14:33 -06:00
Gregory Nutt
c6fc285277 CAN: Add a new CAN upper-half interface, can_txready(), that can be used to break deadlock conditions in certain CAN hardware that supports queuing of TX messages 2015-11-03 10:52:58 -06:00
Lok
da8950fe5b Fix an error in clock_timespec_subtract 2015-11-03 07:28:46 -06:00
Gregory Nutt
fc91ded815 Add support for a general user LED lower-half driver 2015-11-01 14:57:22 -06:00
Gregory Nutt
cbb78071b3 Rename ioexpander/ directories to discrete/ 2015-11-01 13:14:48 -06:00
Gregory Nutt
0032b91f49 Update ChangeLog 2015-11-01 12:51:03 -06:00
Gregory Nutt
aa92d44caf Update ChangeLog 2015-10-23 07:13:48 +08:00
Gregory Nutt
00af71dd78 Update ChangeLog 2015-10-20 06:02:10 +08:00
Gregory Nutt
d8731d0ef1 Add files missed in previous commit 2015-10-18 08:00:06 +08:00
Gregory Nutt
f5f69ef85d Add a file missed in the last commit 2015-10-13 07:36:46 -06:00
Alan Carvalho de Assis
8f0c912fff Add Zero Cross device driver support 2015-10-13 07:27:16 -06:00
Gregory Nutt
f0b40ba96a Add a a generic lower half button driver 2015-10-13 07:08:11 -06:00
Gregory Nutt
613798027e Add a button upper/lower half driver 2015-10-12 14:29:43 -06:00
Gregory Nutt
b489cd9610 TMFPS: Now basically functional although not heavily tested 2015-10-09 15:17:32 -06:00