common/arm_backtrace_sp.c: In function 'up_backtrace':
common/arm_backtrace_sp.c:253:15: warning: assignment to 'long unsigned int' from 'uint8_t *' {aka 'unsigned char *'} makes integer from pointer without a cast [-Wint-conversion]
253 | top = g_intstacktop;
|
to fix the following clang warning:
Error: chip/eoss3_irq.c:138:47: error: format specifies type 'unsigned int' but the argument has type 'uint32_t' (aka 'unsigned long') [-Werror,-Wformat]
_err("PANIC!!! Bus fault received: %08x\n", getreg32(NVIC_CFAULTS));
~~~~ ^~~~~~~~~~~~~~~~~~~~~~
%08lx
/github/workspace/sources/nuttx/include/debug.h:126:57: note: expanded from macro '_err'
__arch_syslog(LOG_ERR, EXTRA_FMT format EXTRA_ARG, ##__VA_ARGS__)
~~~~~~ ^~~~~~~~~~~
/github/workspace/sources/nuttx/arch/arm/src/common/arm_internal.h:134:24: note: expanded from macro 'getreg32'
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Error: chip/eoss3_irq.c:146:49: error: format specifies type 'unsigned int' but the argument has type 'uint32_t' (aka 'unsigned long') [-Werror,-Wformat]
_err("PANIC!!! Usage fault received: %08x\n", getreg32(NVIC_CFAULTS));
~~~~ ^~~~~~~~~~~~~~~~~~~~~~
%08lx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
1.Don't check the return value of nxsem_init or nxmutex_init
2.Fix some style issue
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Not all boards have an interrupt line from the phy to
the Soc. This commit allows the phy to be polled for
link status.
This may not work on all MAC/PHY combination that
have mutually exclusive link management and operating
modes. The STM32H7 and LAN8742AI do not have such a
limitation.
Fix typos
1. add 'ARM' prefix to choice menu
2. rename 'Generic Clang toolchain' to 'LLVM Clang toolchain'
to avoid confuse with CONFIG_ARM_TOOLCHAIN_ARMCLANG
Signed-off-by: chao an <anchao@xiaomi.com>
armv6-m/arm_exception.S:139:2: error: invalid instruction, any one of the following would fix this:
sub r1, #(4 * (10))
^
armv6-m/arm_exception.S:139:2: note: instruction requires: thumb2
sub r1, #(4 * (10))
^
armv6-m/arm_exception.S:139:10: note: invalid operand for instruction
sub r1, #(4 * (10))
^
armv6-m/arm_exception.S:139:2: note: no flag-preserving variant of this instruction available
sub r1, #(4 * (10))
^
armv6-m/arm_exception.S:139:10: note: operand must be a register in range [r0, r7]
sub r1, #(4 * (10))
^
-----------------------------------------
bringup.c:125:18: warning: variable 'ret' is uninitialized when used here [-Wuninitialized]
return ret;
^~~
bringup.c:73:10: note: initialize the variable 'ret' to silence this warning
int ret;
^
= 0
Signed-off-by: chao an <anchao@xiaomi.com>
chip/flash.c: In function '_spif_read_status_reg_x':
chip/flash.c:46:9: warning: this 'while' clause does not guard... [-Wmisleading-indentation]
46 | while ((AP_SPIF->fcmd &0x02)==0x02); \
| ^~~~~
chip/flash.c:128:3: note: in expansion of macro 'SPIF_STATUS_WAIT_IDLE'
128 | SPIF_STATUS_WAIT_IDLE(SPIF_WAIT_IDLE_CYC);
| ^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
If you specify a file path on SPI-Flash in CONFIG_CXD56_GNSS_CEP_FILENAME,
it causes a deadlock issue in the inter-CPU communication. To resolve it,
introduce a new CONFIG_CXD56_GNSS_CEP_ON_SPIFLASH and then use pre-read
buffers during checking CEP file. So this needs the large of free memory.
Remove hardware zero length packet enhancement because of driver
logic already processed the ZLP correctly. It is unnecessary and cause
of IN interrupt lost.
On armv8-m the MPU region limits are inclusive. Thus, we must substract
one byte of size from (base + limit).
Signed-off-by: Michael Jung <michael.jung@secore.ly>
When a function is known to preserve eight-byte alignment of the stack, armclang assigns the build
attribute Tag_ABI_align_preserved to that function. However, the armclang integrated assembler does
not automatically assign this attribute to assembly code.
Signed-off-by: xiangdong6 <xiangdong6@xiaomi.com>
common/arm_backtrace_fp.c: In function 'up_backtrace':
common/arm_backtrace_fp.c:126:23: warning: assignment to 'void *' from 'uintptr_t' {aka 'unsigned int'} makes pointer from integer without a cast [-Wint-conversion]
126 | istacklimit = arm_intstack_top();
| ^
Signed-off-by: chao an <anchao@xiaomi.com>
1. rename arm_backtrace_thumb.c to arm_backtrace_sp.c
2. use EHABI stack unwinder instead of instruction unwind
Signed-off-by: chao an <anchao@xiaomi.com>
In SMP mode, if all cores start at same time, all from __start(),
then only primary need do initialize, so others core should wait
primary, use 'sev' let the non-primary continue to __cpuN_start().
Signed-off-by: ligd <liguiding1@xiaomi.com>
NON-primary cpu will invalidate cpu0's cache L2, that will caused cpu0's data mismatch, and then system crash
Signed-off-by: ligd <liguiding1@xiaomi.com>
The IDMA needs to have 32 bit word alignment, in fact it will
AND off the lower 2 bits of the value stored in IDMABASE0R.
This bug was masked by CONFIG_ARMV7M_DCACHE causing proper word alignment
and also FAT_DMAMEMORY being aligned.
This commit extends the unaligned logic (used for dcache) to take into account
the need for a buffer copy when the buffer is ot 32 bit word.
It leverages the fact that when CONFIG_ARMV7M_DCACHE is not defined the up_xxxxx_dcache are nops.
Fix build break:
Error: L6218E: Undefined symbol _sbss (referred from arm_head.o).
Error: L6218E: Undefined symbol _ebss (referred from arm_head.o).
Error: L6218E: Undefined symbol _eronly (referred from arm_head.o).
Error: L6218E: Undefined symbol _sdata (referred from arm_head.o).
Error: L6218E: Undefined symbol _edata (referred from arm_head.o).
Signed-off-by: chao an <anchao@xiaomi.com>
Summary:
- I noticed that lc823450-xgevk does not boot due to the recent
changes on g_current_regs
- This PR fixes this issue
Impact:
- None
Testing:
- Tested with lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
1. some arm instructions are not compatible with arch tlsr:
{standard input}: Assembler messages:
{standard input}:53: Error: bad instruction `svc #0'
2. remove unsupport compile option
cc1: error: unrecognized command line option "-mlittle-endian"
Signed-off-by: chao an <anchao@xiaomi.com>
Reference:
https://developer.arm.com/documentation/dui0474/m/image-structure-and-generation/section-placement-with-the-linker/section-placement-with-the-first-and-last-attributes
CAUTION:
FIRST and LAST must not violate the basic attribute sorting order. For example, FIRST RW is placed after any read-only code or read-only data.
arm-none-eabi-readelf -aS arm_vectors.o
1. Without const:
Section Headers:
[Nr] Name Type Addr Off Size ES Flg Lk Inf Al
[ 3] .vectors PROGBITS 00000000 000034 00011c 00 WA 0 0 4
2. const symbol:
[ 3] .vectors PROGBITS 00000000 000034 00011c 00 A 0 0 4
Regression by:
| commit 229b57d6cb
|
| arch/armv[6|7|8]-m: Move _vectors to arm_internal.h to avoid the duplication
|
| and change the type of _vectors from uint32_t to const void *
|
| Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
In file included from ./armv7-r/arm_l2cc_pl310.c:41:
./armv7-r/l2cc_pl310.h:38:10: fatal error: chip/chip.h: No such file or directory
38 | #include "chip/chip.h"
| ^~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
Config option IMXRT_ADCx_ETC can now be used to select an external HW
trigger to be used instead of continous trigger. Continous trigger is
used if IMXRT_ADCx_ETC = -1 (default option). Otherwise the source signal
is routed through XBAR and used as a trigger.
Hardware triggering is currently limited to maximum of 8 channels.
HW trigger is automatically disabled if there are more than 8 channels.
The external triggering was tested with PWM signal as a source.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
1.
make[1]: *** No rule to make target 'tms570_spi.c', needed by '.depend'. Stop.
2.
In file included from armv7-r/arm_gicv2.c:36:
armv7-r/gic.h: In function 'arm_gic_nlines':
armv7-r/mpcore.h:63:29: error: 'CHIP_MPCORE_VBASE' undeclared (first use in this function)
63 | #define MPCORE_ICD_VBASE (CHIP_MPCORE_VBASE+MPCORE_ICD_OFFSET)
| ^~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
since armv7-r does not support kernel mode
./armv7-r/arm_syscall.c:36:10: fatal error: addrenv.h: No such file or directory
36 | #include "addrenv.h"
| ^~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
Summary:
- Currently, CONFIG_ARCH_PGPOOL_MAPPING=y is necessary for
CONFIG_BUILD_KERNEL=y.
- This commit removes the code for CONFIG_ARCH_PGPOOL_MAPPING=n
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
