sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
31,703 Commits 1 Branch 0 Tags 291 MiB
67d09e831b
Commit Graph

10656 Commits

Author SHA1 Message Date
Gregory Nutt
c0a79a8e45 configs/flipnclick-sam3x: Fix an error in the control of one LED. LEDs should not be pulled up since they are active high. 2018-01-27 12:42:51 -06:00
Gregory Nutt
12e3e47d3c Update comments, mostly spelling errors. 2018-01-27 09:37:46 -06:00
Gregory Nutt
23c6debc63 configs/flipnclick-sam3x: Update README and comments to discuss I2C access on all mikroBUS connectors. 2018-01-25 13:33:09 -06:00
Gregory Nutt
483dfe80d9 configs/flipnclick-pic32mz and flipnclick-sam3x: Update README and add pin definitions to support SPI on all mikroBUS connectors. 2018-01-25 12:45:02 -06:00
Gregory Nutt
633e90225e configs/flipnclick-sam3x (also Arduio-Due): Remove disabling of environmont, mountpoints, and poll. Add NSH arch initialization so that procfs will be automounted. Increase task name size from 0 to 32. Update README. 2018-01-25 10:37:16 -06:00
Gregory Nutt
cafb527262 configs/flipnclick-sam3x: Using JTAG (vs. Bossac) I was finally able to load code and verify the basic NSH configuration. Updated READMEs. Also switched to USART0 (vs UART0) for the serial console because I was not getting bi-directional communication on the VCOM. 2018-01-24 08:52:40 -06:00
Gregory Nutt
82cb799bb6 net/udp: Fix memory leak with UDP + write buffer is closed. Also update TODO and comments and refresh a configuration. 2018-01-23 11:54:03 -06:00
David Alessio
6ae6ecc958 Merged in david_alessio/nuttx/refactor-pll-setup (pull request #581) 
Refactor pll setup

* fix typo in #def

* refactor PLL setup code...

* refactored PLL/CLK config, easier, checks for correctness

* call go_os_start if STACK_COLORIZED

* smarter config of EXTCLK output freq

* cosmetic

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-01-22 13:20:35 +00:00
Fanda
460d362eb7 Merged in fvacek/nuttx (pull request #580) 
NUCLEO F432KC typo fixed, correct name is L432KC

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-01-21 18:28:47 +00:00
Mateusz Szafoni
5af7e3de2a Merged in raiden00/nuttx (pull request #579) 
Master

* stm32_hritm: add interface to get timer clock frequency

    stm32_hrtim: fix timer freq calculation

    stm32_hrtim: add compar/capture registers significant bits checking

    stm32_hrtim: minor changes

* stm32f334-disco: add buck converter and boost converter logic

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-01-21 18:28:09 +00:00
Fanda Vacek
9916ca89e6 NUCLEO F432KC typo fixed, correct name is L432KC 
Just README.txt and comments affected, no changes in the code
 2018-01-21 19:06:22 +01:00
Gregory Nutt
f153df28d3 configs/nucleo-l432kc: Fix numerous cloning errors/typos. 2018-01-20 16:16:35 -06:00
Fanda Vacek
d0ae325c15 Issue #85: /dev/userleds is not working for nucleo-l432kc fixed 2018-01-20 23:02:34 +01:00
Gregory Nutt
e8e8914cab Documentation: Fix copy/paste error in NX graphics document. Noted by Henjiu Kang. 2018-01-20 07:11:33 -06:00
Gregory Nutt
ff8cdcc89f configs/lpcxpresso-lpc54628: Update README 2018-01-18 11:14:54 -06:00
Gregory Nutt
c0a343a6f0 configs/lpcxpresso-lpc54628/lvgl: Add LittlevGL graphics demo configuration. 2018-01-18 10:00:27 -06:00
Gregory Nutt
ce7df1f961 configst/stm3240g-eval: Remove only bogus logic to start the NX server. That was there only to support the knxwm configuration and was implemented priorit to boardctl(BOARCIOC_NX_START). 2018-01-18 06:57:38 -06:00
Masayuki Ishikawa
0184f8818a Merged in masayuki2009/nuttx.nuttx/lc823450_fixes (pull request #576) 
lc823450 fixes

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-01-18 12:32:41 +00:00
Masayuki Ishikawa
0fa630d29d configs/lc823450-xgevk: Update README.txt and defconfigs 
Update comments on SMP in README.txt
Enable SYSTEM_TIME64 in defconfigs.
Enable INSTRUMENTATION in rndis configuration.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2018-01-18 14:02:39 +09:00
Gregory Nutt
d481ac347d configs: Both CONFIG_LIB_BOARDCTL=y and CONFIG_BOARD_INITIALIZE=y is not meaningful in the standalone NxWM. CONFIG_LIB_BOARDCTL=y is the better option so CONFIG_BOARD_INITIALIZE=y removed from these configurations. 2018-01-17 13:51:29 -06:00
Gregory Nutt
6deebac4ae configs: There should be either CONFIG_LIB_BOARDCTL=y or CONFIG_BOARD_INITIALIZE=y in the defconfig of every standalone NxWM configuration to assure that all of the board resources are initialized... especially the touchscreen since it it now a part of the board driver initialization. 2018-01-17 12:12:07 -06:00
Gregory Nutt
c456b87dcd configs: CONFIG_MAX_TASKS muast be a power of 2 2018-01-17 10:54:39 -06:00
Gregory Nutt
43390c78ea configs: Since the touch screen initialization is now called from one-time board-initialization logic, it no longer needs protection from re-entry. 2018-01-17 10:14:03 -06:00
Gregory Nutt
301bf1ee77 This commit eliminates the BOARDIOC_TSCTEST_SETUP command. 
Squashed commit of the following:

    configs:  Each board now initializes the touchscreen controller as a normal part of its board bring-up.  board_tsc_setup() is gone; the touchscreen controller is now treated like any other on-board device.
    Remove all support for BOARDIOC_TSCTEST_SETUP
    Move prototype for board_tsc_setup() from include/nuttx/board.h to individual board header files.
 2018-01-17 09:33:28 -06:00
Gregory Nutt
e276d4d16d Remove the BOARDIOC_TSCTEST_TEARNDOWN boardctl() command. Remove all implementations of board_tsc_teardown() (the were all stubs anyway except for the simulation). 2018-01-16 18:03:21 -06:00
Fanda
53db5c80f3 Merged in fvacek/nuttx (pull request #572) 
Fixed nucleo-l432kc broken build when CONFIG_USERLED_LOWER defined

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-01-16 23:33:58 +00:00
Gregory Nutt
c67de1f114 configs/lpcxpresso-lpc54628: Add pin definitions for USART, I2C, and SPI on the Arduino Uno connector. 2018-01-16 11:48:36 -06:00
Juha Niskanen
802f146781 configs/nucleo-* and configs/stm32l476vg-disco: Fix more stm32_userleds.c bogus logic 2018-01-16 07:20:41 -06:00
Gregory Nutt
a30ccce7ce configs/nucleo-l432kc/src: Fix some bogus logic noted by Fanda. 2018-01-15 18:22:29 -06:00
Gregory Nutt
8f94ce46f9 arch/arm/src/lpc54xx: The basic SPI driver is code complete but still untested. This driver is 'basic' in that in only supports polled mode operations. 2018-01-14 12:09:26 -06:00
Gregory Nutt
fdf4e40b6a configs/lpcxpresso-lpc54628: Correct SRAM base address in all configurations. 2018-01-13 08:34:58 -06:00
Gregory Nutt
0eca2c6fef Update README files 2018-01-11 07:28:12 -06:00
Masayuki Ishikawa
48b7f9b807 configs/lc823450-xgevk: Update defconfigs 
Apply the latest Kconfig to all configurations.
Enable DVFS in audio and rndis. Add telnet character mode to rndis.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2018-01-10 16:16:03 +09:00
Masayuki Ishikawa
5029aa7e8c configs/lc823450-xgevk: Enable DVFS in lc823450_bringup.c 
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2018-01-10 16:16:00 +09:00
Masayuki Ishikawa
ea19abd291 configs/lc823450-xgevk: Update README.txt 
Add notes on DVFS (Dynamic Voltage and Frequencey Scaling)

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2018-01-10 16:15:27 +09:00
Gregory Nutt
eef1276565 configs/stm32f103-minimum: Remove nonsensical #error. 2018-01-09 11:17:01 -06:00
Gregory Nutt
c367a223c5 Update README 2018-01-09 07:20:39 -06:00
Gregory Nutt
7d4451ee86 Squashed commit of the following: 
configs/flipnclick-pic32mz:  Switch the serial console to UART4.  Clean up some minor issues the LED options.
    configs/flipnclick-pic32mz:  Add support for two on-board buttons:  T1 and T2.
    configs/flipnclick-pic32mz:  Adds basic board support for the Mikroe Flip&Click PIC32MZ board.  Initial commit is just the configs/pic32mz-starterkit with some name chanages.
 2018-01-08 14:21:49 -06:00
Gregory Nutt
6fe1f5a96c Squashed commit of the following: 
arch/mips/src/pic32mz:  Commits the basic architecture port for the PIC32MZEF.
    arch/mips/src/pic32mz:  Begin adding PIC32MZEF files. Initial commit are simply PIC32MZEC files with name changes.
    arch/mips/include/pic32mz:  Add support for the PIC32MZEF family.
 2018-01-08 10:01:23 -06:00
Gregory Nutt
a0aec8ccde configs/stm32f103-minimum: Add file that was included in the last patch. 2018-01-07 12:17:15 -06:00
Gregory Nutt
4227d11b6c configs/flipnclick-sam3x: Update README and some comments. 2018-01-07 11:07:39 -06:00
Gregory Nutt
bc320c7878 configs/arduino-due and flipnclick-sam3x: Enable PROCFS in nsh configurations. 2018-01-06 17:54:48 -06:00
Alan Carvalho de Assis
20c11e918f configs/stm32f103-minimum: Add AT24 EEPROM support on STM32F103-Minimum board 2018-01-06 17:10:32 -06:00
Gregory Nutt
ed18e427f3 Squashed commit of the following: 
configs/flipnclick-sam3x:  Add support for the 4 user-controllable LEDs on the board.
    configs/flipnclick-sam3x:  Add board support for the Mikroe Flip&Click SAM3X.
    configs/arduino-due:  Update this old configuration so that it is structured a little more like recent board support.
 2018-01-06 17:06:50 -06:00
Gregory Nutt
0253c974b2 Squashed commit of the following: 
fs/nxffs:  Giving up on truncate() support in NXFFS for now.  There is too much that has to be done to make that work.
    configs/sim:  Add support for testing NXFFS.
 2018-01-06 13:32:32 -06:00
Gregory Nutt
17cedb6b20 Squashed commit of the following: 
fs/smartfs:  Add logic needed to ftruncate to shrink a file to any arbitrary size.
    fs/smartfs:  Repartition some functionality to better fit in new ftruncate features.
 2018-01-06 10:43:18 -06:00
Gregory Nutt
c85bc9e941 configs/sim: Add support for a RAM MTD driver and initialization for use with SmartFS. 2018-01-05 13:54:37 -06:00
Gregory Nutt
5d1a91fd8e configs/lpcxpresso-lpc5428/fb: Should disable pixel depths that are not being used. 2018-01-04 16:40:31 -06:00
Gregory Nutt
36cc4fc066 Fix saome warnings found in build testing. 2018-01-04 13:33:42 -06:00
Gregory Nutt
7d131fe711 Update TODO list 2018-01-03 08:32:57 -06:00