Some USB controllers can receive or send multiple data packets then
generate one interrupt. This mechanism can reduce the number of data
copies. Extend req buf to accommodate this.
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
purpose:
To improve the real-time performance of the system, we prefer to perform
as few operations as possible within the interrupt function.
We have designed an interrupt thread for each interrupt,
where all the operations that are not necessary to be handled
in the interrupt function are delegated to be processed by the interrupt thread.
Up_enable_irq will be invoked after isrthread started.
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Add TUNSETCARRIER ioctl, then we may change the carrier state of TUN dynamically. Note that we don't need an ioctl for getting carrier, it can be done by SIOCGIFFLAGS already.
Ref: https://github.com/torvalds/linux/blob/v6.10/drivers/net/tun.c#L3374-L3380
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
CC: serial/serial_io.c "/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/nuttx/power/regulator.h", line 227: warning #231-D:
declaration is not visible outside of function
int regulator_gpio_init(FAR struct ioexpander_dev_s *iodev,
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
This is a memory monitoring interface implemented with reference to Linux's PSI (Pressure Stall Information),
which can send notifications when the system's remaining memory is below the threshold.
The following example code sets two different thresholds.
When the system memory is below 10MB, a notification is triggered.
When the system memory is below 20 MB, a notification (POLLPRI event) is triggered every 1s.
```
int main(int argc, FAR char *argv[])
{
struct pollfd fds[2];
int ret;
if (argc == 2)
{
char *ptr = malloc(1024*1024*atoi(argv[1]));
printf("Allocating %d MB\n", atoi(argv[1]));
ptr[0] = 0;
return 0;
}
fds[0].fd = open("/proc/pressure/memory", O_RDWR);
fds[1].fd = open("/proc/pressure/memory", O_RDWR);
fds[0].events = POLLPRI;
fds[1].events = POLLPRI;
dprintf(fds[0].fd, "%llu -1", 1024LLU*1024 * 10);
dprintf(fds[1].fd, "%llu 1000000", 1024LLU*1024 * 20);
while (1)
{
ret = poll(fds, 2, -1);
if (ret > 0)
{
printf("Memory pressure: POLLPRI, %d\n", ret);
}
}
return 0;
}
```
https://docs.kernel.org/accounting/psi.html
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
"/home/guoshichao/work_profile/vela_os/vela_car_4/nuttx/include/nuttx/net/netdev.h", line 493: warning #231-D:
declaration is not visible outside of function
FAR struct netdev_ifaddr6_s *addr,
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
1.Add sign to indicate negative and positive
2.Fix case where there are negative numbers in the operation
3.expand to 512 bytes to support rsa2048
Signed-off-by: makejian <makejian@xiaomi.com>
(1) RSA_PKCS15_VERIFY Misspell
(2) if iv not provided during decryption, iv should get from data.
It was not discovered before because all symmetric decryption comes with iv.
Signed-off-by: makejian <makejian@xiaomi.com>
Some macro definitions have already been defined in other header files, redundant macro definitions have been removed in include/nuttx/can.h. Align some code. Remove no use struct (can_response_s) and some variables.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Events groups are synchronization primitives that allow tasks to wait
for multiple conditions to be met before proceeding. They are particularly
useful in scenarios where a task needs to wait for several events to occur
simultaneously.
Signed-off-by: chao an <anchao@lixiang.com>
./build.sh sim:usbdev -j12
sudo gdb nuttx/nuttx -ex "source nuttx/tools/gdb/__init__.py"
below command to create mbim NIC on host
nsh> conn 3
NuttX's MBIM device implementation adds an additional MBIM network
card to the NuttX system, which can debug the data communication with
the host, but this network card is unnecessary and needs to be removed
when the business actually uses this driver, And the cdcncm_receive
method needs to be re-implemented.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Summary:
Indicate whether the file is currently locked by adding a new field locked to filep.
0 - Unlocked
1 - Locked
The status of the filep at close is used to determine whether to continue with the following procedure.
Optimizing performance:
Before
Time taken to close the file: 33984 nsec
After
Time taken to close the file: 23744 nsec
Improvement of about 10 msec
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
Because stdio.h references stdatomic.h in MVSC, it internally declares mbstate_t, leading to redeclarations during compilation.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
This change mainly appears in the compilation environment of MVSC
Since MVSC supports the c++11 standard in VS2019 preview3 (https://en.cppreference.com/w/cpp/compiler_support/11), we can do static initialization using the c++11 approach
atomic_int a = 1
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1. use nuttx/atomic.h instead of stdatomic
2. remove CONFIG_HAVE_ATOMIC,because we now support atomic on all platforms
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1.Modify the conditions for entering different include header files
2.Added pre-definition for _Atomic _Bool when it is missing
3.Added nuttx for stdatomic implementation. When toolchain does not support atomic, use lib/stdatomic to implement it
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1. Add nuttx/atomic.h in include
2. Use nuttx/atomic.h instead of stdatomic.h in the nuttx directory
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
remove alist, switch to a convenient way to traverse
the physical address directly.
At the same time, we can use `gurad` to mark whether
it is free or alloc or out of bounds check
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
pm process should be done by chip specific, but we can provide a standard
flow, then vendor & chip can only focus on handle different state change.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
when the vsync comes, fb drivers should call fb_vsync_pollnotify to notify POLLPRI, so that users can catch the synchronization time of vsync and do something.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
Summary:
1.Remove the macro definition of getnproc in sysinfo
2.New get_nprocs_conf and get_nprocs interfaces, return CONFIG_SMP_NCPUS, return 1 when not defined
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
optimize the interaction flow associated with network drivers to reduce
the amount of code and improve compatibility
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
This is a tool for associating discrete IDs with addresses.
This tool is implemented through the red-black tree method provided by <sys/tree.h>, and the time complexity when calling, searching, and deleting is optimized to O(logn)
The implementation is the moving node operation of two red-black trees
1. When applying for a node, it will first check whether there is an available node in the "removed" tree. If so, the memory address of the node will be reused and moved to the "alloced" tree.
2. If the "removed" tree is an "empty tree", then the node will be requested from the memory and added to the "alloced" tree
3. Similarly, when removing a node, we set the address pointed to in the node to "NULL" and move it to the "removed" tree. Next time we alloc the node, we can reduce the overhead caused by memory application
For now, we still have something that can be optimized, and that is the memory elimination mechanism of the "removed tree". The current implementation will only release all the content under the "removed" tree when the idtree is destroyed.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
According to the eMMC specification, in Backwards Compatibility
with legacy MMC card mode, the frequency of the SD clock must be
0-26 MHZ; in high speed SDR mode, it must be 0-52MHZ. So we should
switch to high speed SDR mode if the clock frequency is higher than
26MHZ.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
solve the compiling problem of the third-party library,
add IN6_IS_ADDR_MC_LINKLOCAL and IN6_IS_ADDR_SITELOCAL definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
"libcxxmini/libxx_cxa_guard.cxx", line 47: error #77-D: this declaration has
no storage class or type specifier
__extension__ typedef int __guard __attribute__((mode(__DI__)));
^
"libcxxmini/libxx_cxa_guard.cxx", line 47: error #65: expected a ";"
__extension__ typedef int __guard __attribute__((mode(__DI__)));
^
"libcxxmini/libxx_cxa_guard.cxx", line 64: error #20: identifier "__guard" is
undefined
int __cxa_guard_acquire(FAR __guard *g)
^
"libcxxmini/libxx_cxa_guard.cxx", line 64: error #20: identifier "g" is
undefined
int __cxa_guard_acquire(FAR __guard *g)
^
"libcxxmini/libxx_cxa_guard.cxx", line 65: error #65: expected a ";"
{
^
"libcxxmini/libxx_cxa_guard.cxx", line 93: warning #12-D: parsing restarts
here after previous syntax error
}
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
CC: src/algslib_sha256.c "comlin.c", line 189: error #1982-D: target stack alignment is insufficient to
guarantee alignment of this variable
struct can_frame lin_err_frame = comlin_rx_frame[chlId];
^
"comlin.c", line 282: error #1982-D: target stack alignment is insufficient to
guarantee alignment of this variable
struct can_frame frame;
^
"comlin.c", line 321: error #1982-D: target stack alignment is insufficient to
guarantee alignment of this variable
struct can_frame frame;
"DiagServer_IsoTp.c", line 220: error #1982-D: target stack alignment is
insufficient to guarantee alignment of this variable
struct canfd_frame frame = {0};
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
the mempool_alloc and mempool_free function are duplicate with the
mempool method that provided in optee_os, in order to port optee_os, so
we rename the mempool related functions in nuttx
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
In order to better use the Android goldfish emulator,
a GPU FB driver has been added. This allows the goldfish
emulator side to achieve more flexible display effects,
such as UI skins.
Signed-off-by: rongyichang <rongyichang@xiaomi.com>
According to Virtual I/O Spec:
When using legacy interfaces, transitional drivers which have not negotiated VIRTIO_F_ANY_LAYOUT MUST use a single descriptor for the struct virtio_net_hdr on both transmit and receive, with the network data in the following descriptors.
https://docs.oasis-open.org/virtio/virtio/v1.2/cs01/virtio-v1.2-cs01.html#x1-2280006 (Section 5.1.6.6)
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
stdint.h is needed in uart_16550.h for some types, e.g. uint32_t,
uintptr_t. Otherwise there will be building issue unless that stdint.h
is added before uart_16550.h by all files which needs uart_16550.h.
Signed-off-by: Jinliang Li <lijinliang1@lixiang.com>
warning C5101: use of preprocessor directive in function-like macro argument list is undefined behavior
Co-authored-by: chenxiaoyi <chenxiaoyi@xiaomi.com>
Co-authored-by: xuxin19 <xuxin19@xiaomi.com>
