Gregory Nutt
|
ad1701d0f9
|
SAMA5D4: Various changes to get the SAMA4D-EK to build
|
2014-06-06 15:39:40 -06:00 |
|
Gregory Nutt
|
ae01e0819d
|
SAMA5: Cosmetic clean-up of README files
|
2014-06-04 17:02:30 -06:00 |
|
Gregory Nutt
|
70207e05e3
|
SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC
|
2014-06-04 12:04:24 -06:00 |
|
Gregory Nutt
|
2dbaed4779
|
The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name
|
2014-05-05 08:52:02 -06:00 |
|
Gregory Nutt
|
8713ee3428
|
SAMA5 board.h files use type xcpt_t and so must include nuttx/irq.h for type xcpt_t
|
2014-04-17 10:01:15 -06:00 |
|
Gregory Nutt
|
5eb9ee30dd
|
Updated README files
|
2014-04-16 16:41:47 -06:00 |
|
Gregory Nutt
|
51950d7850
|
Undefine IRQPRIO in all configurations it should not be set
|
2014-04-16 08:29:39 -06:00 |
|
Gregory Nutt
|
ab5b37189b
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
Gregory Nutt
|
cecf3775e2
|
SAMA5: The PIO used for the red LED is also used as the camera module reset line: Added a configuration option to suppress use of the red LED if the PIO is used for another purpose. Reported by David Sidrane.
|
2014-04-11 15:57:35 -06:00 |
|
Gregory Nutt
|
069ea487ae
|
Long needed clean up of DNS resolver for coding style and naming conventions
|
2014-04-11 12:25:32 -06:00 |
|
Gregory Nutt
|
724ad8d7b5
|
Updated README files and comments
|
2014-04-07 07:43:28 -06:00 |
|
Gregory Nutt
|
c3c5633419
|
SAMA5: Fix some issues with SDRAM at 528MHz CPU clock
|
2014-04-04 11:37:39 -06:00 |
|
Gregory Nutt
|
22c2ef2abe
|
SAMA5 boards: Operation at 528Mhz has been verified
|
2014-04-04 10:36:53 -06:00 |
|
Gregory Nutt
|
6500587e35
|
SAMA5 boards: Refresh all configuration files
|
2014-04-04 09:38:39 -06:00 |
|
Gregory Nutt
|
52cfdccd7a
|
SAMA5 boards: Add set up for 528MHz CPU clock
|
2014-04-03 17:12:17 -06:00 |
|
Gregory Nutt
|
2a1a468fe1
|
SAMA5D3 Xplained: Delay loop calibrated
|
2014-04-03 16:38:36 -06:00 |
|
Gregory Nutt
|
cb86f97702
|
If LOWVECTORS is selected, then we need to clear the VBAR register. A bootloader may have left the VBAR in an bad state
|
2014-04-03 13:09:30 -06:00 |
|
Gregory Nutt
|
a23fc8cc56
|
Updated comments and README
|
2014-04-02 09:03:29 -06:00 |
|
Gregory Nutt
|
015c911b8b
|
SAMA5 DBGU: Add logic to suppress DBGU reconfiguration when started from a bootloader
|
2014-04-02 09:03:27 -06:00 |
|
Gregory Nutt
|
13295a6a1b
|
Top level make will now generate a U-Boot uImage file
|
2014-04-01 11:56:58 -06:00 |
|
Gregory Nutt
|
dd094828ec
|
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
|
2014-04-01 11:24:15 -06:00 |
|
Gregory Nutt
|
eb74d08118
|
Cosmetic update to comments and README files
|
2014-03-31 17:25:39 -06:00 |
|
Gregory Nutt
|
cd2c436f96
|
Cosmetic updates to comments and README files
|
2014-03-31 15:10:15 -06:00 |
|
Gregory Nutt
|
cdcf4f3ad6
|
Costmetic fixes to README and some comments
|
2014-03-30 11:34:18 -06:00 |
|
Gregory Nutt
|
b0c302ea06
|
Add instructions for running NuttX from NAND or TFTP
|
2014-03-30 10:25:44 -06:00 |
|
Gregory Nutt
|
33f57c6df2
|
SAMA5 Boards: When running from SDRAM, a 32KB offset is needed by the bootloader
|
2014-03-30 10:24:31 -06:00 |
|
Gregory Nutt
|
c433c684fa
|
SAMA5D23 boards: When running out of SDRAM, need to query the PMC to determine operating frequency
|
2014-03-29 17:51:06 -06:00 |
|
Gregory Nutt
|
0d22850b30
|
SAMA5D3 Xplained: Has no NOR flash. Remove all NOR support from board configuration
|
2014-03-29 15:05:09 -06:00 |
|
Gregory Nutt
|
b16da844a8
|
Add basic board support framework for the Atmel SAMA5D3 Xplained board (not finished)
|
2014-03-28 15:20:26 -06:00 |
|