Commit Graph

10839 Commits

Author SHA1 Message Date
Gregory Nutt
6230ab01b6 arch/arm/include/armv7-m: Last change requires inclusion of chip.h for definition. 2018-06-06 10:38:51 -06:00
Marco Krahl
af9bf8d721 Merged in MarcoKrahl/nuttx/ltdc (pull request #652)
ports stm32 ltdc and stm32 dma2d to framebuffer interface

* stm32: Removes current dma2d and ltdc implementation for replacement

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32f429i-disco: Removes obsolete functions call

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32_dma2d: Adds pixel format and transparency definitions

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32_dma2d: Adds interface definition

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32_dma2d: Reimplements dma2d driver

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32_ltdc: Adds interface definition

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32_ltdc: Reimplements ltdc driver

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32: Updates LTDC and DMA2D Kconfig definitions

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32f429i-disco: Fix compile error when ldc debug is enabled

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32f429i-disco: Adds helper script for frambuffer and heap2 calculation

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32f429i-disco: Update README for framebuffer configuration

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32f429i-disco: Update board configuration of framebuffer example

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-06-06 16:05:05 +00:00
Mateusz Szafoni
a002238898 Merged in raiden00/nuttx (pull request #651)
stm32f334-disco/buckboost: use a PID controller from libdsp

* libdsp: initial commit

* libdsp: cosmetics

* stm32f334-disco/buckboost: use a PID controller from libdsp

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-06-06 12:47:37 +00:00
Masayuki Ishikawa
fb07bd7e27 Adds loopback test for digital MIC on lc823450 via i2schar driver.
Squashed commit of:

  configs/lc823450-xgevk: Enable DMDIN0 (Digital MIC)
  I2S: Add ioctl interface to i2s_ops_s and i2schar driver
  arch/arm/src/lc823450: Add DGMIC in lc823450_i2s.c
  configs/lc823450-xgevk: Add i2schar driver to lc823450_wm8776.c
  configs/lc824350-xgevk: Enable AUDIO_I2SCHAR in audio/defconfig
  configs/lc823450-xgevk: Update README.txt
2018-06-05 10:34:22 -06:00
Gregory Nutt
d72096df55 configs: Fix several warnings from bad configurations, mostly STM32F4 Discovery, that have OTGFS eanbled, but not USB support. 2018-06-02 07:01:55 -06:00
Alan Carvalho de Assis
ecf3bccf09 configs/stm32f4discovery: Add a module configuration for testing the kernel module example with the STM32F4Discovery board. 2018-06-02 06:44:20 -06:00
Alan Carvalho de Assis
c31472e836 configs/xmc4500-relax/src: Call xmc4_spidev_initialize() in xmc4_boot.c. 2018-06-02 06:44:20 -06:00
Gregory Nutt
aeb476bfaf Update README 2018-06-01 17:38:38 -06:00
Gregory Nutt
8c8778cc44 configs/olimex-stm32-p407: Add the module configuration. 2018-06-01 15:56:13 -06:00
Gregory Nutt
d52c63f632 Change all references from OSX to macOS 2018-06-01 13:25:50 -06:00
Gregory Nutt
d83355357e samv71-xult: Refersh module configuration. samv71-xult and imxrt1050-evk: Two more places where libc references in old position. Should be libs/libc. 2018-06-01 11:21:19 -06:00
Alan Carvalho de Assis
0923643d99 configs: Fix all boards with module support to use nuttx/libs/libc/modlib/gnu-elf.ld instead of nuttx/libc/modlib/gnu-elf.ld. 2018-06-01 08:00:59 -06:00
Alan Carvalho de Assis
93c9d323e0 configs/stm32f4discovery: Add Load Modules flags to STM32F4Discovery board 2018-06-01 07:58:16 -06:00
Gregory Nutt
de119e8589 Various fixes necessary to build the simulator under MSYS. 2018-05-31 13:25:04 -06:00
Gregory Nutt
4cb5a9a989 Trivial update to README. 2018-05-30 11:06:59 -06:00
Gregory Nutt
f2a89813f2 Build system: Remove fixed lib/ subdirectory and its content. Replace with new directory called staging/ that is created dynamically when building and removed when 'make clean' is done. This both improves the name and eliminates a garbage directory from the repository. 2018-05-29 11:36:21 -06:00
Gregory Nutt
18273b437a Update README 2018-05-29 10:37:32 -06:00
Gregory Nutt
1a00aff177 Update README 2018-05-28 07:46:14 -06:00
Gregory Nutt
c74e9fd6da Update a readme and some comments. 2018-05-27 15:13:54 -06:00
Gregory Nutt
ca1a7c2b28 configs: Update readme files; fix buffer sizes in olimex-stm32-p407/zmodem configuration. 2018-05-27 10:26:01 -06:00
Gregory Nutt
62a1c176df configs/olimex-stm32-p407: Add a zmodem test configuration. 2018-05-26 18:03:37 -06:00
Alan Carvalho de Assis
48982a1acf configs/xmc4500-relax: Add board support for SPI 2018-05-26 16:18:17 -06:00
Gregory Nutt
74148048c2 configs/stm32f4discovery/include/board.h: Add pin disambiguation for USART2 flow control pins. 2018-05-26 15:59:00 -06:00
Gregory Nutt
548cd2892a arch/arm/src/imxrt and configs/imxrt1050-evk: Add PHY access support needed to support the network monitor. Cannot enable it yet... I am getting hardfaults when I enable the PHY interrupt. 2018-05-25 13:02:41 -06:00
Gregory Nutt
c0aef893c4 Trivial update to a README 2018-05-25 13:02:28 -06:00
Jake Choy
8601d767cc This commit adds an i.MX RT Ethernet drivers.
Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    arch/arm/src/imxrt:  Add cache operations to permit the Ethernet driver to work with the D-Cache enabled, at least in write-through mode.

Author: Jake Choy <jakearcx@gmail.com>
    arch/arm/src/imxrt:  The Ethernet driver is now functional, at least with the D-Cache off.  The final fix was for the reference clock that needs to be forced to provide and input (SION).

Author: Gregory Nutt <gnutt@nuttx.org>
    Fix trivial coding standard issue.
    configs/imxrt1050-evk:  Correct CONFIG_RAM_SIZE in all configurations (5Kb not 5Mb).  I don't believe that CONFIG_RAM_SIZE is used at all in the i.MX RT so this is as grievous an error as it seems.  Also enabled built-in applications in all NSH configurations.
    arch/arm/src/imxrt/imxrt_enet.c:  Trivial and cosmetic.
    Cosmetic update to comments.
    arch/arm/src/imxrt/imxrt_enet.c:  Oops.. put the PHY interrupt init hooks in the wrong place.  That is a one-time initialization but imxrt_initphy() is called on each ifup.
    arch/arm/src/imxrt/imxrt_enet.c:  Add hooks for board-specific PHY initialization (not yet needed, but there when needed).
    Remove dangling white space at the end of lines
    arch/arm/src/imxrt/Kconfig:  Add option for board-specific PHY initialization.
    configs/imxrt1050-evk/src:  Add basic logic to support PHY interrupts.  Incomplete.. needs additional support in imxrt_enet.c to 1. call to initialize PHY interrupt features, and 2. IOCTL commands to access PHY registers.
    configs/imxrt1050-evk/README.txt: Trivial update.
    configs/imxrt1050-evk/netnsh/defconfig:  Disable LED support because pins conflict with PHY.  Enable device statists.  Enable NSH ifup and ifdown commmands
    arch/arm/src/imxrt:  Use macros in imxrt_periphclks.h vs. direct CCM CCGR accesses in Ethernet driver.
    arch/arm/src/imxrt:  Misc changes for a clean compilation of Ethernet deriver.  configs/imxrt1050-evk/netnsh:  Add an NSH configuration for testing Ethernet.

Author: Jake Choy <jakearcx@gmail.com>
    arch/arm/src/imxrt:  Initial WIP Ethernet driver.
2018-05-25 09:36:23 -06:00
Gregory Nutt
e07504291e configs/imxrt1050-evk: Fix OCRAM size used in linker script. 2018-05-24 16:51:18 -06:00
Gregory Nutt
a7f1c2415c configs/imxrt1050-evk: Correct CONFIG_RAM_SIZE in nsh configurations (5Kb not 5Mb). I don't believe that CONFIG_RAM_SIZE is used at all in the i.MX RT so this is as grievous an error as it seems. Also enabled built-in applications in the nsh configurations. 2018-05-24 16:41:08 -06:00
Gregory Nutt
a540806ecf configs/indium-f7: Removes support for the Indium-F7 board. This was done for two reasons: (1) The board support was just clone of the Nucleo-144 board support with naming changes. There has been no support and no further development for the board support. (2) There does not seem to be any available Indium-F7 board available to the public anywhere on the internet. There is not even a reference to the board on the rafresearch.com web stie. Gotta go. Its in the way. 2018-05-24 13:09:20 -06:00
Ivan Ucherdzhiev
f837f2231f configs/imxrt1050-evk/src: Add support for on-board NOR FLASH boot. 2018-05-21 06:23:07 -06:00
Gregory Nutt
0f6aeb7cff arch/arm/src/imxrt: Centralilze and standardize control of peripheral clocking. Add logic to initialize the DMAMUX. 2018-05-20 10:03:45 -06:00
Gregory Nutt
6529a5666e Update README file 2018-05-19 17:32:56 -06:00
Gregory Nutt
9da3d4a2a9 drivers/lcd and configs/olimex-lpc1766stk: Remove support for the Nokia6100 LCD. That LCD uses a 9-bit SPI interface (the 9th bit being the command/data bit that is normally a discrete). That communication was never successfully integrated. I now believe that it would would require some special support from the low-level, MCU SPI driver to manage that 9th bit. The deleted code is still available in the Obsoleted repository in the nuttx/drivers/lcd, nuttx/configs/olimex-lpc1766stk, and Patches directories. 2018-05-19 16:46:21 -06:00
Alan Carvalho de Assis
cc1d68bd92 arch/arm/src/stm32: Include needed headers to get stm32_i2s.c compiled
configs/stm32f4discovery/include/board.h: Add SPI DMA pins definitions to get CS43L22 audio DAC working
configs/stm32f4discovery/audio: Add board configuration for CS43L22 audio example
configs/stm32f4discovery:  Update README
2018-05-19 16:12:21 -06:00
Gregory Nutt
23ff4b4206 configs/stm32l1discovery: Fix a typo introduced in the Make.defs file. 2018-05-18 11:46:22 -06:00
Gregory Nutt
10ec45ae9e configs/stm32l1discovery: Add support for the STM32L152RCT6 version. 2018-05-18 11:34:55 -06:00
Gregory Nutt
d519358fd9 configs/nucleo-l452re/src: board.h must always be the last header file included. 2018-05-15 17:17:20 -06:00
Gregory Nutt
c82724d462 arch/arm/src/imxrt: Add missing support for the Cortex-M7 caches; configs/imxrt1050-evk: Enable I- and D-Caches in the nsh configuration. Calibrate the delay loop. Add support for the on-board LED. 2018-05-15 10:05:16 -06:00
Gregory Nutt
c681519720 arch/arm/src/imxrt/imxrt_serial.c: Fix some interrupt instabilities; must be in a critical section when modifying serial interrupts. configs/imxrt1050-evk/nsh/defconfig: Use the BASEPRI register to enable/disable interrupts; enable the PROCFS file system. 2018-05-15 07:50:19 -06:00
Juha Niskanen
0275c8e9c7 configs/nucleo-l452re: Add buttons example 2018-05-15 07:50:19 -06:00
Gregory Nutt
2c94eb1188 board.h edited online with Bitbucket 2018-05-15 04:24:26 +00:00
Gregory Nutt
2fa738e08c arch/arm/src/imxrt: Various fixes from attempt at initial bringup. 2018-05-14 16:07:34 -06:00
Anthony Merlino
2de86b3e40 Merged in antmerlino/nuttx/photon_rgb_fix (pull request #643)
configs/photon: Fixes build error introduced in recent rgbled changes.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-05-14 18:25:53 +00:00
Anthony Merlino
2ed01b3c27 Merged in antmerlino/nuttx/photon-rgbled-fix (pull request #642)
Photon rgbled fix

* configs/photon: Simplifies RGB led start-up logic.

* configs/photon: RGB led on Photon is common anode. CONFIGS_RGBLED_INVERT is now enabled

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-05-14 17:58:23 +00:00
Gregory Nutt
aec56484ab arch/arm/src/kinetis + SDHC configs: Make Kinetis SDHC pullups work the same as the STM32 SDIO pullups 2018-05-12 17:12:58 -06:00
Gregory Nutt
e4922ed9f0 Remove instructures to CD to tools/ before running ./configure.sh
Squashed commit of the following:

    configs/*/README.txt: Replace each occurrence of './configure.sh' with 'tools/configure.sh'
    configs/*/README.txt:  Remove 'cd ..' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd -' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd tools' before each './configure.sh'
    configs/README.txt:  Remove instruction to CD tools/ before running configure.sh.
2018-05-09 11:41:46 -06:00
Gregory Nutt
0b6ccfe769 configs/teensy-3.x/usbnsh: Remove CONFIG_USBDEV_DUALSPEED from configuration. Hardware supports only FS. 2018-05-09 08:50:05 -06:00
Gregory Nutt
a9f96ebdad configs/freedom-k28f: If drivers/leds/rgbled.c is enabled, then treat the board as though it had no discrete LEDs. 2018-05-05 13:01:23 -06:00
Gregory Nutt
b5a4d6d9ef configs/freedom-k28f: With these changes to the configuration, the NSH configuration is now functional on the k28f board. Also fixes corrects the active logic level for the RGB LED. arch/arm/src/kinetis/chip: Fixes an error in vector configuration. 2018-05-05 09:33:48 -06:00
Gregory Nutt
8c81b97148 Squashed commit of the following:
configs/freedom-k28f:  Add button and LED support.
    arch/arm/src/kinetis:  Fix a couple of additional compile problems.
    arch/arm/src/kinetis/chip and configs/freedom-k28f:  Add things needed for a successful build.  Still need board LED definitions.
2018-05-04 12:04:08 -06:00